Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 8 : Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics

__Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems, Volume 8:__ __Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics__, the eighth volume of eight from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of areas, including: Advances in Residual Stress Measurement Methods Residual Stress Effects on Material Performance Optical, Ultrasonic, and Diffraction Methods for Residual Stress Measurement Thermomechanics & Infrared Imaging Inverse Methods Inverse Methods in Plasticity Applications in Experimental Mechanics Front Matter....Pages i-ix Analysis of Thrust Production in Small Synthetic Flapping Wings....Pages 1-8 Coarse-Resolution Cone-Beam Scanning of Logs Using Eulerian CT Reconstruction. Part I: Discretization and Algorithm....Pages 9-19 Coarse-Resolution Cone-Beam Scanning of Logs Using Eulerian CT Reconstruction. Part II: Hardware Design and Demonstration....Pages 21-29 Crack Nucleation Threshold Under Fretting Loading by a Thermal Method....Pages 31-38 Crack Growth Study of Fibre Metal Laminates Using Thermoelastic Stress Analysis....Pages 39-45 Crack Detection in Large Welded Components Under Fatigue Using TSA....Pages 47-50 Hybrid Thermoelastic Analysis of an Unsymmetrically-Loaded Structure containing an Arbitrarily-Shaped Cutout....Pages 51-57 Quantitative Themographic Characterization of Composites....Pages 59-66 Thermal Deformation of Micro-structure Diffuser Plate in LED Backlight Unit....Pages 67-77 Polariscopy Measurement of Residual Stress in Thin Silicon Wafers....Pages 79-85 Curvature from Residual Stress in Rapidly Quenched Amorphous Metals Using Abrasive Layer Removal....Pages 87-92 Slitting Method Measurement of Residual Stress Profiles, Including Stress Discontinuities, in Layered Specimens....Pages 93-102 Repeatability of the Contour Method for Residual Stress Measurement....Pages 103-111 Repeatability of Incremental Hole Drilling and Slitting Method Residual Stress Measurements....Pages 113-118 Drilling Speed Effects on Accuracy of HD Residual Stress Measurements....Pages 119-125 Ultrasonic Nonlinear Guided Waves and Applications to Structural Health Monitoring....Pages 127-134 Defect Detection in Composite Structures Using Lock-In Infrared Thermography....Pages 135-141 Digital Image Correlation for Identification of Vibration Modes....Pages 143-151 Application of VFM for the Simultaneous Identification of Visco-pseudo-hyper Elastic Constants of Rubbers....Pages 153-161 Anisotropy Evaluation of Paperboard With Virtual Fields Method....Pages 163-170 Investigation of Fatigue Properties of Titanium Alloy Applying Variational Infrared Thermography....Pages 171-176 Monitoring Materials Under Impact with Infrared Thermography....Pages 177-185 Damage Induced Evolution of the Thermal Diffusivity of SiC/SiC Composite....Pages 187-197 Identification of Welding Heat Sources from Infrared Temperature Measurements....Pages 199-206 Nondestructive Evaluation of Fiber Reinforced Polymers with Lockin Thermography....Pages 207-213 Realistic 3D FE Modelling of Peening Residual Stresses of Strain-Rate Sensitive Materials with Oblique Incident Angles....Pages 215-220 Water Cavitation Peening by Ultrasonic Vibration for Improvement of Fatigue Strength of Stainless Steel Sheet....Pages 221-227 Effect of Residual Stress on Spallation of NiCrBSi Coating....Pages 229-234 Multiaxial Fatigue Resistance of Shot Peened High-Strength Aluminium Alloys....Pages 235-243 Quantifying Residual Strains in Specimens Prepared by Additive Layer Manufacturing....Pages 245-252 Parameter Determination of Anisotropic Yield Criterion....Pages 253-257 Performance Assessment of Inverse Methods in Large Strain Plasticity....Pages 259-265 Optical: Numerical Determination of the Flow Curves of Anisotropic Steels and Failure Prediction....Pages 267-276 Advanced Biaxial Cruciform Testing at the NIST Center for Automotive Lightweighting....Pages 277-285 An Enhanced Plasticity Model for Material Characterization at Large Strain....Pages 287-294 Residual Stress and Phase Transformation Map for Impact Fatigued Zirconia....Pages 295-301 Characterization of Silicon Photovoltaic Wafers Using Infrared Photoelasticity....Pages 303-308 Acoustic Emission Analysis of Aluminum Specimen Subjected to Laser Annealing....Pages 309-315 Optical Analysis of Weld-Induced Residual Stress by Electronic Speckle-Pattern Interferometry....Pages 317-323 Shape Is Not Enough to Test Hypotheses for Morphogenesis....Pages 325-331 FBG Based In Situ Characterization of Residual Strains in FDM Process....Pages 333-337 Polynomial Fitting Techniques for IRT Inspection....Pages 339-345 In-Flight Infrared Thermography for Studies of Aircraft Cabin Ventilation....Pages 347-354 Study of Elastomeric Membranes for Vibration Dampers in Non-stationary Conditions....Pages 355-364 Structural Dynamic Modification to Predict Modal Parameters of Multiple Beams....Pages 365-377 This critical collection presents early findings and case studies on a wide range of areas, as presented in the Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics. The collection includes papers in the following general technical research areas: • Advances in Residual Stress Measurement Methods • Residual Stress Effects on Material Performance • Optical, Ultrasonic, and Diffraction Methods for Residual Stress Measurement • Thermomechanics & Infrared Imaging • Inverse Methods • Inverse Methods in Plasticity • Applications in Experimental Mechanics Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems: Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics is the eighth volume of eight from the Conference