Recent advances in structural integrity analysis : proceedings of the International Congress (APCF/SIF-2014), Darlington Campus, University of Sydney, Australia, December 9-12, 2014, The APCF/SIF-2014 Congress uniting: Asian-Pacific Conferrence on Fractur

The proceedings of the International Congress (c) include about 120 papers selected out of 160 papers submitted for presentations at APCF/SIF-2014, to be held in Sydney, Australia, December 9-12, 2014, and uniting the Asian-Pacific Conference on Fracture and Strength 2014 (APCFS-2014) with the International Conference on Structural Integrity and Failure (SIF-2014). The congress will be hosted by The University of Sydney and co-organized by Australia Fracture Group (AFG), the Chinese Mechanical Engineering Society, Materials Institution (CMES-MI), the Korean Society of Mechanical Engineers, Materials and Fracture Division (KSME-MFD) and The Japanese Society of Mechanical Engineers, Materials and Mechanics Division (JSME-MMD). The congress follows the series of the previous very successful APCF and SIF international forums, in particular, APCFS 2012, Busan and the 8 th SIF, Melbourne, 2013. Characterisations of complex mechanisms of damage accumulation and failure Application of new multi-scale modelling approaches in problems associated with structural integrity Development of more accurate technologies for structural damage assessment Content: Front matter, Pages i,iii Copyright, Page iv APCFS/SIF-2014 Congress Chairs and Committees, Pages v-vi Foreword, Page 1 Optimization and fracture mechanism analysis of TC17 titanium alloy simulated-blade with two-sided laser shock processing, Pages 2-6 Investigation of fracture mechanism of electroplated coating subjected to contact loading, Pages 7-11 Effect of vertex singularities on the displacement and strain fields near a crack front, Pages 12-16 Calculating the essential work of fracture of proton exchange membranes using a finite element analysis, Pages 17-21 Stress singularity analysis and experimental determination of bonding strength of viscoelastic/viscoelastic bi-material interface, Pages 22-26 Ductile fracture simulation for toughness specimens from low alloy and stainless steel pipes, Pages 27-31 Cracks of classical modes in small-scale Cosserat continuum, Pages 32-36 Ductile fracture simulation for A106 Gr.B carbon steel under high strain rate loading condition, Pages 37-41 Effect of plasticity hardening exponent and creep exponent on crack tip stress under elastic-plastic-creep conditions for SE(B) specimen, Pages 42-46 A new approach for evaluating stress intensity factor based on thermoelastic stress analysis, Pages 47-51 Environmental stress cracking behavior of high crystalline polypropylene in different surface active agents using modified notched constant load test, Pages 52-56 Fracture and wear in shredder hammer tungsten carbide tips in the sugar cane shredding process, Pages 57-61 An investigation into variations in roughnessinduced crack closure in high strength aircraft alloys under fatigue loading, Pages 62-66 An analysis of elasto-plastic fracture criteria, Pages 67-71 A high-frequency fatigue accelerated measuring method for P-S-N curve and fatigue limit, Pages 72-77 Study on fatigue damage of the Cu32W68 pseudo alloy, Pages 78-82 Small fatigue crack propagation in Al-Cu alloy laminated structure via ultrasonic consolidation, Pages 83-87 Fatigue life of lead free solder material with very sharp notch, Pages 88-92 Evaluation of the effects of low temperature nitriding on 4-points bending fatigue properties of Ti-6Al-4 V alloy, Pages 93-98 ΔKth estimation of aluminum die-casting alloy by means of √area method, Pages 99-103 Effect of ultrasonic shot peening treatment on fatigue behavior of AZ61 magnesium alloy, Pages 104-108 The effect of specimen thickness on fatigue crack growth under variable amplitude loading in 7075-T7351 Aluminium, Pages 109-113 Fatigue behaviour of web penetration details with a slit in steel girder, Pages 114-118 Accelerated method of propagation threshold of intergranular stress corrosion cracking by using fretting fatigue, Pages 119-122 Effects of environment on fatigue crack growth behavior of 2000 and 7000 series aluminum alloys, Pages 123-126 Thermoelastic monitoring of fatigue degradation in aluminium alloy supersonic particle deposition coatings, Pages 127-131 Improvements to predicting fatigue crack growth rates in aluminium alloy (AA7050-T7451) loaded with a standard transport aircraft spectrum, Pages 132-136 Optimal coupon design to achieve natural crack start in coupon fatigue tests, Pages 137-141 Small fatigue crack initiation mechanisms and growth behavior of 304 stainless steel at room temperature, Pages 142-146 Evaluation on dispersion and degradation of creep rupture property based on Z-parameter, Pages 147-152 Creep-fatigue life prediction through multiple regression analyses, Pages 153-157 Tensile strength of silica optical fibers for high-temperature sensing applications, Pages 158-162 Numerical modelling of impact response of aluminium foam/FML sandwich panels, Pages 163-167 Numerical study on effects of buffer bulbous bow structure in collisions, Pages 168-172 Energy absorption of crashworthy structure for rolling stock of a railway, Pages 173-177 Research on the strength of air cushion vehicle, Pages 178-182 A new super element for the use in failure assessment techniques utilising FAD concept, Pages 183-187 Real-time signal processing of guided waves acquired on high-speed trains for health monitoring of bogie systems, Pages 188-192 Effects of mistuning patterns on forced response for an integrally bladed disk, Pages 193-197 Dynamic buckling tests of cylindrical tubes with and without pellets, Pages 198-202 Effects of leak rate on LOCA probability of pipes in nuclear power plants, Pages 203-207 Investigation on acceleration methods for seismic analysis of through-wall cracked piping, Pages 208-211 Simulation and failure analysis of strain clamp failed caused by deterioration of contact resistance, Pages 212-217 Applicability of net section collapse load approach to assessment of pipes with multiple circumferential cracks, Pages 218-222 Thermal aging effect on tensile and ratcheting behaviour of nuclear power pipeline steel, Pages 223-228 Effect of models and derivation methods for initial flaw size distribution on probability of failure of airframes, Pages 229-233 A life prediction method for aircraft structure based on enveloping life surface, Pages 234-238 Fuzzy modeling to predict the adhesion strength of TiN ceramic thin film coating on aerospace AL7075-T6 alloy, Pages 239-244 Solidification simulation of copper-iron alloy for lead frame by phase-field method, Pages 245-249 Return mapping considerations for tangential inelastic effect on the subloading surface model, Pages 250-254 Evaluation of guided wave propagation in steel pipes, Pages 255-260 Nonlinear response of a closed defect to Lamb waves: perturbation analysis using hybrid finite element method, Pages 261-264 Laser shock peening simulation of mitigation on residual stress in Alloy 600, Pages 265-268 Deformation and behaviour of membrane structure by large deformation and contact simulation, Pages 269-273 Burst simulations of steam generator tubes using FE damage analyses, Pages 274-278 Effect of pile-ups of dislocations in numerical analysis of fatigue crack propagation using discrete dislocations method, Pages 279-283 Effects of mesh size and specimen configuration in simulating ductile fracture of metals by GTN model, Pages 284-287 Modelling localisation and spatial scaling of constitutive behaviour: a kinematically enriched continuum approach, Pages 288-293 Natural frequency analysis of rat whiskers, Pages 294-299 Age-related degradation of mouse cortical bone: implications for the α-klotho gene responsible for bone mechanical integrity in a series of nanoindentation experiments, Pages 300-304 Mechanical analysis of the influence of the change in the height of gravitational center on body sway properties for postural control in the human body, Pages 305-310 Evaluation of mechanical properties of porcine sclera, Pages 311-315 Tensile behaviour of a sustainable fibre reinforced cementitious composite under different strain rates, Pages 316-320 Deformation behavior of polymeric hollow fiber membranes for water purification, Pages 321-325 Effect of in-plane tension to blank on formability of carbon fiber non-crimp fabric, Pages 326-330 Effect of stitch tension of non-crimp fabric on the mechanical properties of CFRTP, Pages 331-335 Temperature effect on strength of aluminum based high thermal conductive composites containing VGCF-CNT filler, Pages 336-340 Mesoscale analysis of CFRP pressure vessel, Pages 341-345 Low temperature stress estimation of fiber reinforced material, Pages 346-350 Fracture of fiber reinforced materials under off-axis loading, Pages 351-355 Prediction of Young’s modulus: from effective clay clusters to polymer nanocomposites, Pages 356-360 Effects of temperature and strain rate on fracture toughness of nano-rubber modified epoxies, Pages 361-364 Effect of silane coupling agent and air plasma treatment on interfacial shear strength of carbon fiber/polyphenylene sulfide composites, Pages 365-369 Electrical conductivity and mechanical performance of polymer/graphene composites developed by two compounding methods, Pages 370-374 Effect of rare earth on the characterization of corrosion of low carbon steel in CSP, Pages 375-379 Effect of the Ce on behavior of corrosion resistance and mechanical properties of A36 plate steel for shipbuilding, Pages 380-385 Stress corrosion cracking of sensitized stainless steel type 304 in high-temperature, high-purity water environment, Pages 386-390 Hydrogen absorption amount of magnesium formate at room temperature, Pages 391-395 The influence of Ti layer on the hydrogen desorption properties of Mg in multi-layer, Pages 396-400 Reduction of hydrogen embrittlement cracking of stainless steel SUS316L by cavitation peening, Pages 401-405 Evaluation for hydrogen embrittlement properties of ultra high-strength steel sheets by 4-Point Bending Technique, Pages 406-411 Hydrogen behavior in tensile-deformed Al-Zn-Mg alloy and Al-Mg alloy, Pages 412-416 Dynamic and quasi-static compressive properties of modified double-base propellant at low temperature, Pages 417-421 Mechanical property of microstructure in die-cast magnesium alloy evaluated by indentation testing at elevated temperature, Pages 422-426 Parametric study of the hydrogen diffusion in carbon steels under fatigue loading conditions using Green’s function, Pages 427-431 Experimental investigation on mechanical property of an integrated thermal protection structure, Pages 432-436 A novel positioning stage using piezoelectric actuator for antenna pointing, Pages 437-441 Optimal design of the large stroke piezoelectric actuator using rhombic mechanism, Pages 442-446 Active vibration control of cantilever beam using MFC sensor and actuator, Pages 447-452 High temperature performance of a metal-packaged strain sensor based on a regenerated fiber Bragg grating in Boron–Germanium-codoped fiber, Pages 453-457 Study on thermal physical properties of 304 stainless steel, Pages 458-462 Microstructure and properties of W-TiC/Cf composites prepared by spark plasma sintering, Pages 463-466 Study on the microstructure and properties of different intermediate coatings to RuO2-TiO2-SnO2/Ti Anodes, Pages 467-472 Influence of compound silicate gangue containing potassium in baiyunebo iron ore on solid-phase reactions during sintering process, Pages 473-476 Dynamic mechanical behavior and microstructure evolution of an AM80 magnesium alloy, Pages 477-481 Effect of welding conditions on residual stress and stress intensity factor around remaining crack at seal welds, Pages 482-487 Influence of thermal boundary conditions on melting behaviour of an Ag nanowire mesh induced by Joule heating, Pages 488-493 Study on structural lightweight design of oil tankers based on HCSR, Pages 494-498 Mechanical properties of PSZ-Ti composites fabricated by spark plasma sintering, Pages 499-503 A study on compressive behaviour of aluminium foam-filled tubes, Pages 504-509 Trial fabrication of Al micro-materials by electromigration using buildup structure, Pages 510-514 Evaluation of electromigration near a corner composed of dissimilar metals by analyzing atomic flux at the interface, Pages 515-518 Influence of substrate materials on deposition behaviour of cold spray emulated pure single Al particle, Pages 519-523 Stress-induced anisotropic diffusion of component elements in stacked thin-film multi-layer structures, Pages 524-528 Thermal shock resistances of AlO-CrO/NiCoCrAlYTa and AlO/NiCoCrAlYTa coatings deposited by atmosphere plasma spraying, Pages 529-533 Vibration control of sandwich structure by integration of shear thickening fluid (STF), Pages 534-538 Simulation of material behaviour of engineered cementitious composites under uniaxial tension, Pages 539-543 Evaluation of martensite transformation process in austenitic stainless steel due to transient resistivity measurement, Pages 544-548 Image-guided morphological measurement for the rabbit aortic arch in the non-loaded state, Pages 549-554 Estimation method of residual stress and plastic strain in austenitic stainless steel by single indentation test, Pages 555-559 Measurement of the strength of a grain boundary by using the combination of focused ion beam and electron back-scatter diffraction methods, Pages 560-564 Tensile characteristics of Cu/Sn IMCs estimated by using miniature composite solder specimen, Pages 565-569 In situ micro-mechanical testing of grain boundaries combined with environmental TEM, Pages 570-574 Stress estimation of polyamide material by X-ray diffraction, Pages 575-579 Prediction of the resistance to machining-induced cracking in zirconia by nanoindentation, Pages 580-584 Lamb wave characterisation and damage imaging for isotropic plate-like structures using 3D laser vibrometry, Pages 585-589 Testing localized microstructural architectures with miniaturised cantilever beams, Pages 590-594 Author Index, Pages 595-598 Annotation Summary The proceedings of the International Congress (c) include about 120 papers selected out of 160 papers submitted for presentations at APCF/SIF-2014, to be held in Sydney, Australia, December 9-12, 2014, and uniting the Asian-Pacific Conference on Fracture and Strength 2014 (APCFS-2014) with the International Conference on Structural Integrity and Failure (SIF-2014). The congress will be hosted by The University of Sydney and co-organized by Australia Fracture Group (AFG), the Chinese Mechanical Engineering Society, Materials Institution (CMES-MI), the Korean Society of Mechanical Engineers, Materials and Fracture Division (KSME-MFD) and The Japanese Society of Mechanical Engineers, Materials and Mechanics Division (JSME-MMD). The congress follows the series of the previous very successful APCF and SIF international forums, in particular, APCFS 2012, Busan and the 8th SIF, Melbourne, 2013. About the Editor Lin Ye is a Professor in the Department of Mechanical Engineering at the University of Sydney, Australia. Contents Stress-Strain Analysis Experimental and Measurement Techniques Damage Tolerance Design Macro-, Micro- and Nano- Mechanisms of Damage Accumulation, Fracture, Fatigue, Creep, Wear and Corrosion Solid and Fracture Mechanics Advanced Fatigue Crack, Fatigue Strength and Life Predication Modelling Environmental Aspects of Fracture and Fatigue Strength and Life Prediction at Elevated Temperatures Adhesion, Fusion Bonding, Welding Impact Mechanics Bio-Mechanics Rock Mechanics and Hydraulic Fracturing Repair Technologies Prognostic Health Assessment and Asset Management Multi-component Material Systems Functional Graded Materials Smart Materials and Structures Applications of Structural Integrity and Fracture Mechanics Methods in Specific Areas

The proceedings of the International Congress (c) include about 120 papers selected out of 160 papers submitted for presentations at APCF/SIF-2014, to be held in Sydney, Australia, December 9-12, 2014, and uniting the Asian-Pacific Conference on Fracture and Strength 2014 (APCFS-2014) with the International Conference on Structural Integrity and Failure (SIF-2014). The congress will be hosted by The University of Sydney and co-organized by Australia Fracture Group (AFG), the Chinese Mechanical Engineering Society, Materials Institution (CMES-MI), the Korean Society of Mechanical Engineers, Materials and Fracture Division (KSME-MFD) and The Japanese Society of Mechanical Engineers, Materials and Mechanics Division (JSME-MMD). The congress follows the series of the previous very successful APCF and SIF international forums, in particular, APCFS 2012, Busan and the 8th SIF, Melbourne, 2013.

• Characterisations of complex mechanisms of damage accumulation and failure
• Application of new multi-scale modelling approaches in problems associated with structural integrity
• Development of more accurate technologies for structural damage assessment