Proceedings of the International Conference of Mechatronics and Cyber-MixMechatronics – 2018 (Lecture Notes in Networks and Systems Book 48)

"This proceedings book gathers contributions presented at the 2nd International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME, organized by the National Institute of R&D in Mechatronics and Measurement Technique in Bucharest, Romania, on September 6th-7th, 2018. Further, it reflect the expansion of the field of Mechatronics, which has yielded newer trans-disciplinary fields including Adaptronics, Integronics, and Cyber-Mix-Mechatronics. These are also the topics addressed by the respective book chapters. The conference has a rich scientific tradition and attracts specialists from all over the world - including North America, South America, and Asia. ICOMECYME is focused on presenting research results and is mainly directed at academics and advanced students, but also offers a venue for interacting with R&D experts. These proceedings will especially benefit entrepreneurs who want to invest in research and who are open for collaborations." -- prové de l'editor Preface Contents Effect of Vibration Frequency on Mechanical Behavior of Automotive Sensor Abstract 1 Introduction 2 Sensor Used 3 Applied Vibratory Profile 4 Benches Used 5 Discussion and Results 6 Conclusion References Applications of Additive Technologies in Realization of Customized Dental Prostheses Abstract 1 Introduction 2 Materials and Methods 3 Experimental 4 Conclusions Acknowledgements References Researches Regarding the Use of Additive Technologies in the Construction of Water Aeration Elements Abstract 1 Introduction 2 Presentation of the Fine Bubble Generator 3 The Technology for the Execution of the Orifice Disc 4 Experimental Researches on the Fine Bubble Generator 5 Research Methodology and the Experimental Obtained Results 6 Conclusions Acknowledgements References Researches on the Measurement of the Dissolved Oxygen Concentration in Stationary Waters Abstract 1 Introduction 2 Presentation of Methods that Are Used to Measure the Dissolved Oxygen Concentration in Water 2.1 Chemical Methods 2.2 Electrical Methods 2.3 Optical Methods 2.4 Non-invasive Method 3 Experimental Researches on the Determination of Dissolved Oxygen in Water by the Electrical Method 4 Conclusions Acknowledgements References Experimental Results of Turbo-Aggregate Vibroacoustic Diagnosis Obtained with Vibro-Expert System fo ... Abstract 1 Introduction 2 Expert Vibro Data Acquisition and Processing System 3 Technical Conditions of Measurement, Operating Regimes and Types of Measurements 4 Results Obtained Using Expert Vibro Data Acquisition, Measurement and Data Acquisition System 5 Conclusions and Recommendations Appendix References Applications of Additive Technologies in the Food Industry Abstract 1 Introduction 2 3D Printing Technology for the Food Industry 3 Impact of 3D Printing in the Food Industry 4 Conclusions Acknowledgements References Additive Technologies and Materials for Realization of Elastic Elements Abstract 1 Introduction 2 Materials and Fabrication Methods 3 Experimental Results 4 Conclusions Acknowledgements References Analytical and Experimental Studies on Wear Behaviour of Cast and Heat Treated AlSi12CuMgNi and AlZn ... Abstract 1 Introduction 2 Analytical Model for Calculation of Wear Composite Material 3 Experimental Part 3.1 Selection of Materials 3.2 Mechanical Testing 3.3 Tribological Experiments 3.4 Mechanical Characteristics 3.5 Tribological Results 3.6 Comparison of Calculated Volume of Wear, Based on the Theoretical Model, with the Results Obtain ... 4 Conclusions References Mechatronic System for the Promotion of Physical Activity in People with Motor Limitations Abstract 1 Introduction 2 State of the Art 3 Modeling of the Proposed System 3.1 Chair Module 3.2 Pedal Module 3.3 Main Module 4 Selection of Materials 4.1 Selection of Materials to Be Used in the Adjustable Parts of the Model 4.2 Polymeric Materials 4.3 Electrostatic Powder Coating 5 Selection of Sensors 5.1 Detection of the Pedal Speed and Position of the Structure Arms 6 Study of Exercises that Can Be Performed in the Proposed Model 7 Development of the Game Scenario 8 Final Remarks Acknowledgements References Automated System for Remote Defect Inspection Abstract 1 Introduction 2 Method 3 Data Processing 4 Results 5 Conclusions Acknowledgements (Facultative Field) References Intelligent Hydraulic Power Generating Group Abstract 1 Introduction 2 Hydronic Systems 3 Hydraulic Power Supply Groups 4 The Proposed Intelligent Hydraulic Group 5 Conclusions References A Closed Form Solution for Non-linear Deflection of Non-straight Ludwick Type Beams Using Lie Symmetry Groups Abstract 1 Introduction 2 Nomenclature 3 Ludwick Materials 4 Formulation of the Large Deflection of the Not-Straight Beam Problem 5 Validation 6 Conclusion References Pipe Leakage Detection Using Humidity and Microphone Sensors – A Review Abstract 1 Introduction 2 Detect Leakage in Gas and Oil Pipelines 3 The Functional Description of Wireless Power Transmission Systems WPTs with Radio Frequency Identi ... 4 Benefits of Wireless Power Transmission Systems WPTs 5 Why the RFIDs System Was Selected for Detection Purposes? 6 DHT22 Humidity Sensor 7 MQ-6 Gas Microphone Sensor 8 Mobile Robot for Leakage Detection 9 Conclusion References Current State of Anthropometric Parameters Measurement with Relevance for Advanced Lens Optometric C ... Abstract 1 Optometric Parameters – Patient’s Individual Parameters 1.1 Pupillary Distance 1.2 Vertex BVD Distance (Back Vertex Distance) 1.3 Convergence 2 Frame’s Parameters 2.1 Curvature Angle of Frame 2.2 Pantoscopic Angle 3 Anthropometric Parameters 3.1 Standard Facial Parameters 3.2 Facial Asymmetry Raises Issues in Construction of Glasses Lenses 4 Measurement Techniques of Anthropometric and Final Spectacles Parameters 5 Conclusions Acknowledgement References Study on the Current State of Research in the Field of Artificial Clamping Systems Using Astringent ... Abstract 1 Introduction 2 Applications of Electroadhesive Phenomenon 2.1 Tracked/Wheeled Robots 2.2 Prehensile Devices 2.2.1 Garment Application 2.2.2 Stretchable Electroadhesive Pads 2.2.3 Soft Grippers 3 Conclusion References Modelling the Tibial Bone Using CAD Techniques, Starting from the 3D Scan Model Abstract 1 Introduction 2 Working Method and Resources Used 3 Conclusions. Future Research Directions References Ankle-Knee Rehabilitation System Abstract 1 Introduction 2 The Rehabilitation System 3 Modeling and Simulation 4 Results and Conclusions References A Review of Fault Diagnosis in Mechatronics Systems Abstract 1 Introduction 2 Fault Diagnosis for Actuating Systems 3 Fault Diagnosis for Mechanical Drives 4 Fault Diagnosis for Sensors and Data Acquisition Systems 5 Fault Diagnosis for a Complex System (Robot) 6 Future Work References Pipe Cracks Detection Methods – A Review Abstract 1 Introduction 2 Cracks Detection by Use of a Camera System 3 Cracks Detection by Use of a Magnetic Field 4 Acoustic Detection of Cracks and Corrosion 5 Conclusions References Design and Analysis for Motors Control of a 4-DOF Parallel Robot Abstract 1 Introduction 2 Presentation of the Adopted Constructive Solution 3 The Computation Memoir 3.1 The Computation of the Forward and Inverse Geometric Model 3.2 The Computation of the Robot Arms’ Angles 3.3 Simulation of the Arms’ Behavior 4 Conclusions References Intelligent Mechatronics and Cyber-Mechatronics Ecosystems Developed in “ECOSIN - MECATRON” Research ... Abstract 1 Motivation 2 Realization 2.1 The Concepts of Experimental Mechatronics and Cyber – Mixmechatronics Models 2.2 Conception and Realization of Experimental Mechatronics and Cyber-Mixmechatronics Models 3 Scientific Results 4 Conclusions References Author Index This proceedings book gathers contributions presented at the 2nd International Conference of Mechatronics and Cyber-MixMechatronics/ICOMECYME, organized by the National Institute of R & D in Mechatronics and Measurement Technique in Bucharest, Romania, on September 6th-7th, 2018. Further, it reflect the expansion of the field of Mechatronics, which has yielded newer trans-disciplinary fields including Adaptronics, Integronics, and Cyber-Mix-Mechatronics. These are also the topics addressed by the respective book chapters. The conference has a rich scientific tradition and attracts specialists from all over the world - including North America, South America, and Asia. ICOMECYME is focused on presenting research results and is mainly directed at academics and advanced students, but also offers a venue for interacting with R & D experts. These proceedings will especially benefit entrepreneurs who want to invest in research and who are open for collaborations