Proceedings of FORM 2022: Construction The Formation of Living Environment (Lecture Notes in Civil Engineering, 282)

This book gathers the latest advances, innovations, and applications in the field of environmental and construction engineering, as presented by international researchers at the XXV International Scientific Conference "Construction: The Formation of Living Environment", held in Moscow, Russia on April 20-22, 2022. It covers highly diverse topics, including sustainable innovative development of the construction industry, building materials, reliability of buildings and constructions and safety in construction, modelling and mechanics of building structures, engineering and smart systems in construction, climate change and urban environment. The contributions, which were selected by means of a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaborations. Contents Improvement of Strength Properties of Arbolite Concrete Composites by Impregnation with Sulfur—By-Products of Oil and Gas Industry 1 Introduction 2 Materials 3 Methods 4 Results 5 Discussions 6 Conclusions References Trends in BIM Tools Adoption in Construction Project Implementation: A Case Study in Vietnam 1 Introduction 2 Methodology 3 Results and Discussions 4 Conclusions References Modelling of Filtration with Two Capture Mechanisms 1 Introduction 2 Mathematical Model of Filtration with Two Capture Mechanisms 3 Numerical Solution 4 Discussions 5 Conclusions References Dynamics of Reinforced Concrete Slab-Frame Structures with Punching Damages 1 Introduction 2 Methods 3 Results 4 Discussion 5 Conclusions References High-Strength Modified Concrete for Monolithic Construction 1 Introduction 2 Materials and Methods 3 Results and Discussions 4 Conclusions References Epoxy Materials Filled with Buckwheat Husk Ash 1 Introduction 2 Materials and Methods 3 Results and Discussion 4 Conclusions References The Building Materials Production Process and Uneven Heating 1 Introduction 2 Problem Formulation 3 Numerical Results 4 Conclusion References Behavior of Crane Beams in Bending and Restraint Torsion 1 Introduction 2 Materials and Methods 3 Results 4 Conclusions References Facade Insulation Systems Using Polyethylene Foam 1 Introduction 2 Methods 3 Experimental and Results 4 Discussions 5 Conclusions References Hydrological Studies of Mereb-Gash Basin in the Context of Water Management 1 Introduction 2 Methods 2.1 Description of the Study Area 2.2 Model Setup 2.3 Model Calibration and Validation 3 Results 3.1 SWOT Analysis 3.2 Event-Based Streamflow Model 3.3 Statistical Analysis, Potential Evapotranspiration and Drought 3.4 Continuous Streamflow Models 4 Discussion 5 Conclusions References Comparison of Rolled and Leaned Concrete Gravity Dams 1 Introduction 2 Roller Compacted Concrete Gravity Dams RCC 3 Advantages and Disadvantages of RCC Dams 4 Properties of Rolled Concrete 5 Trapezoid-Shaped CSG Dam 6 Advantages and Disadvantages of Material Dams Cemented Sand and Gravel (CSG) 7 Material Properties (CSG) 8 Methods 9 Results 10 Comparative Calculations of the Stress–strain State and Stability of the Dam 11 Conclusions References Mode Shapes of Hysteresis Type Elastic Dissipative Characteristic Plate Protected from Vibrations 1 Introduction 2 Materials and Methods 3 Results and Discussion 4 Conclusion References Dynamics of FRC Slabs on Elastic–Plastic Supports Under Blast Loading 1 Introduction 2 Methods 3 Results 4 Discussion 5 Conclusion References Concrete Radiation Resistance Dependency on Phase Composition of HCP with Superplasticizers 1 Introduction 2 Methods 3 Results 4 Discussion 5 Conclusion References Operational Durability of Facade Systems 1 Introduction 2 Methods 3 Results 4 Discussions 5 Conclusions References Scanning Electron Microscopy of Plasticized Cement Stone After Heat-Moisture Treatment 1 Introduction 2 Materials and Methods 3 Results and Discussion 4 Conclusions References Flexural Capacities of Cold-Formed Steel Channel Sections with Perforations 1 Introduction 2 Determination of Flexural Capacities of Cold-Formed Steel Channel Sections 3 Effects of Web Hole Dimensions on the Flexural Capacities of Cold-Formed Steel Channel Sections with Perforations 3.1 Elastic Buckling Analysis of Cold-Formed Steel Channel Sections with Perforations 3.2 Flexural Capacities of Cold-Formed Steel Channel with Perforations 4 Conclusions References Influence of Sectional Imperfections on Strength and Behavior of Cold-Rolled Aluminium Alloy Channel Stub Columns 1 Introduction 2 Sectional Imperfections and Nonlinear Finite Element Models 3 Numerical Investigations 3.1 Local Imperfection Investigations 3.2 Distortional Imperfection Investigations 4 Conclusions References Crystallization of Alkanes at Different Substrates: Computer Simulation 1 Therory and Modeling 2 Methods and Models 3 Results and Analysis 4 Conclusion References Spectrum of Transverse Vibrations of a Layered Viscoelastic Composite 1 Introduction 2 Problem Specification and Decision 3 Conclusion References Exact Controllability of the Distributed System Governed by the Wave Equation with Memory 1 Introduction 2 Preliminaries 3 Main Results 4 Discussion 5 Conclusion References Usage of Foamed Construction Materials in Wastewater Treatment Technology 1 Introduction 2 Materials and Method 3 Results and Discussion 4 Conclusions References Use of White Quartz Sand as Fine Aggregate in Concrete for Hydraulic Structures 1 Introduction 2 Materials and Methods 2.1 Materials 2.2 Methods 3 Results and Discussion 3.1 Properties of Fresh Concrete 3.2 Mechanical Properties of HPC 3.3 Determination of Water Absorption 3.4 Determination of Chloride Ion Penetration in Concrete 4 Discussions 5 Conclusions References The Fulfilment of the Zhucowski’s Theorem Conditions in Research of the Stationary Wind Exposure to the Lattice Structure 1 Introduction 2 Experiment Performed and Data Obtained 3 Zhucowski’s Theorem Conditions for Periodic Profiles 4 Checking of Zhucowski’s Theorem Conditions for Lattice Structures at Experimental Stationary Wind Exposure 5 Results 6 Discussion 7 Conclusions References Numerical Simulation of Accelerations of the Upper Floors of a High-Rise Building Under Wind Influence 1 Introduction 2 Materials and Methods 3 Results 4 Conclusion References Assessment of Thermal Aging of Bitumen-Mineral Materials in Various Ways 1 Introduction 2 Materials and Methods 3 Performing Experiments and Analyzing Results 4 Conclusions References Prospects for the Use of Zeolite in Multicomponent Fine-Grained Concretes 1 Introduction 2 Materials and Methods 3 Results 4 Conclusions References Influence of the Carnegie Ridge on the Development of Seismogenic Sources and Seismicity of Ecuador 1 Introduction 2 Methods 3 Results 3.1 The Influence of the Carnegie Ridge 3.2 The North Andean Block (NAB) and the Right-Lateral Strike-Slip Shear 4 Discussion 5 Conclusion References Consideration of External Reinforcement Based on Carbon Fibers for the Redistribution of Bending Moments in Slabs 1 the Status of the Issue of the Application of External Reinforcement 2 Numerical Simulation 3 Conclusion References Hardening Kinetics and Strength of Nanomodified Cement Composites 1 Introduction 2 Methods and Materials 3 Results 4 Discussion 5 Conclusion References End-Plate Beam-to-Column Joints in the Steel Framework 1 Introduction 2 Methods 3 Results and Discussion 4 Conclusion References Increasing the Bearing Capacity of the Joints of Wooden Elements on Metal Plates 1 Introduction 2 Methods 3 Results 4 Discussion 5 Conclusions References Semi-rigid Steel Beam-to-Column Connections 1 Introduction 2 Analysis Methods of Semi-rigid Joints 3 Мodeling Semi-rigid Steel Frames 4 Conclusion References Finite Element Analysis of 3D Thin-Walled Beam with Restrained Torsion 1 Introduction 2 Methods 3 Results and Discussion 4 Conclusions References Impact of Joint Quality on Stress–Strain State and Stability of Bureyskaya Concrete Dam 1 Introduction 2 Materials and Methods 3 Results and Discussion 4 Conclusion References Influence of Polycarboxylate Superplasticizer and Silica Fume on the Properties of Self-compacting Concrete 1 Introduction 2 Materials and Methods 3 Results and Discussion 4 Conclusion References Granular Foam-Glass-Ceramic Thermal Insulation Based on Natural Quartz Sand 1 Introduction 2 Experimental 3 Results 4 Discussions 5 Conclusions References Resistance of Vertical Joints During Torsion of Multistorey Buildings 1 Introduction 2 Methods 3 Results and Discussion 4 Conclusion References Effective Polymer-Modified Bitumen Based on PET Waste 1 Introduction 2 Materials and Methodology 3 Results 4 Conclusion References Properties of 1915T Aluminum Alloy at Low Temperatures 1 Introduction 2 Methods and Materials 3 Results and Discussion 4 Conclusions References Bearing Capacity of Anchors at Multi-cyclic Dynamic Loads 1 Introduction 2 Methods and Materials 3 Results and Discussion 4 Conclusions References Modified Clay Gypsum Materials for Facade Systems 1 Introduction 2 Methods and Materials 3 Results and Discussion 4 Conclusions References Relationship Between Strength and Deformation Characteristics of High-Strength Self-compacting Concrete 1 Introduction 2 Materials and Test Methods 3 Test Results and Discussion 4 Conclusions References Optimization of Mixture Compound for Additive Technologies 1 Introduction 2 Methods 3 Results 4 Conclusion References Numerical Simulation of the Temperature Field of an Office Space with Three Types of Heating Systems 1 Introduction 2 Materials and Methods 3 Results and Discussion 4 Conclusion References Integrating BIM in Operation and Maintenance Stage 1 Introduction 2 Method 3 Results 4 Conclusion References Studying the Structure Formation of Cement Stone in the Presence of Fine-Disperse Additives 1 Introduction 2 Methodologies 3 Results and Discussion 4 Conclusions References Methodology of Information Modeling at the Design Stage of Railway Infrastructure Construction Facilities 1 Introduction 2 Methods 2.1 Features of Railway Infrastructure Facilities 2.2 Information Modeling Toolkit for Railway Infrastructure Objects 2.3 Application of Information Modeling Tools at Various Stages of the Life Cycle 3 Results 4 Conclusion References Comparative Analysis of Domestic and Foreign Methods for Processing Tests for Torsional Shear Device 1 Introduction 2 Literature References 3 Methods 4 Results 5 Conclusions References Some Aspects of the Formation of the Cellular Structure of Slag-Silicate Porous Wood Chip Concrete 1 Introduction 2 Materials and Methods 3 Results and Discussions 4 Conclusions References Author Index