PRICM 8 : proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing : sponsored by the Chinese Society for Metals (CSM), the Japan Institute of Metals (JIM), the Korean Institute of Metals and Materials (KIM), Material

Front Matter....Pages iii-lx Front Matter....Pages 1-1 Research and Production of Heavy Pipeline Plate for Submarine Gas Transmission Lines at Shougang Steel....Pages 3-12 Microstructure characterization in domestically-made TP310HNbN austenitic stainless steel after creep test....Pages 13-18 Recent Niobium Developments for High Strength Steel Energy Applications....Pages 19-26 Synthesis, Chracterization and Pseudo-Capacitive Performance of MnOx/CNT Heteronanostructures....Pages 27-34 Evaluation of the Electrical Resistance and Capacitance of a Di-Electric Electro-Active Polymer....Pages 35-43 Electrochemical Performance of LiMn0.5-XNi0.5-XAl2XO2 by Hydrothermal Method....Pages 45-50 Electrochemical Deposition of High Purity Silicon in Molten Salts....Pages 51-56 Nano Scale Energetic Materials: Theoretical and Experimental Updates....Pages 57-63 First Principles Studies of Mechanical Properties of Thoria....Pages 65-69 Characterization of the Crystallographic Textures and Mechanical Anisotropy Factors in Two Modifications of Zr-2.5Nb Pressure Tube Materials....Pages 71-78 Dispersion Characteristics of PAA (Polyacrylic Acid) for Tube Fouling Control in Nuclear Power Plant....Pages 79-83 Hydrogen Storage Performances of Mg20Ni10-XMX (M=Cu, Co, Mn; X=0–4) Alloys Prepared by Melt Spinning....Pages 85-93 Evidence for Existence and Generality of Competitive Reactions during Hydrogenation of Mg/Cu Superlaminate Composites....Pages 95-101 Torrefaction of Yacon and Jerusalem Artichoke Stems as a Contribution to the Alternative Production of Inulin....Pages 103-110 Charpy Impact Properties of ODS Ferritic Steels....Pages 111-117 Corrosion Problems in Heat Recovery for Water Heating....Pages 119-128 Diffusion Bonding of W/ODS Steel using Pure Iron Insert for Fusion Reactor Applications....Pages 129-135 Durability and Cycling Stability of Copper Coated Titania Nanotube as Anode Materials for Li-Ion Battery....Pages 137-142 Effect of Microstructure on Hydrogen Absorption Property in Hyper-eutectic Mg-31mass%Ni Hydrogen Absorption Alloy....Pages 143-148 Hierarchical ZnO Nano-Tree Growth for High Efficiency Solar Cell....Pages 149-154 Front Matter....Pages 1-1 Investigation on Co-Combustion Kinetics of Anthracite Coal and Biomass Char by Thermogravimetric Analysis....Pages 155-165 Investigation on Corrosion Behavior of High-Level Waste Container Materials....Pages 167-179 Microstructure and Properties of Nano-Structured 9CR Oxide Dispersion Strengthened Steels Produced by Atomization and Hot Isostatic Pressing....Pages 181-188 Renewable Thermoenergetic Resources in the Pyrometallurgical Copper Production Process....Pages 189-196 Study on Super Stable All-Solid-State Battery at High Temperature....Pages 197-201 Study on the Combustion Characteristics and Kinetics of Pulverized Coal in High Oxygen-Enriched Condition....Pages 203-211 The preparation and electrochemical performances of Al-Si/C nanocomposite anode for lithium ion battery....Pages 213-220 Thermodynamic Evaluation for Formation of MgCu2 from MgH2 and Cu....Pages 221-226 Front Matter....Pages 227-227 Synthesis and Antibacterial Properties of Silver and Copper Ions Against Escherichia Coli, Salmonella Typhimurium, Staphylococcus Aureus and Pseudomonas Aeruginosa....Pages 229-234 Interaction of Tourmaline Mineral Powders with Sea Water and Its Anti-Microbial Properties....Pages 235-241 Aragonite Precipitated Calcium Carbonate: A New Versatile Functional Filler for Light Weight Plastic....Pages 243-253 Effect of PH on Susceptibility to Environment-Assisted Cracking of AZ31 Mg Alloy....Pages 255-260 Electrochemical Impedance Characteristics of Sintered 7075 Aluminum Alloy under SSRT Test....Pages 261-268 Novel Self-Foaming Cellular Composites Produced from Recycled Water Potabilisation Sludge....Pages 269-275 Electrochemical Formation of Tb Alloys in LiCl-KCl Eutectic Melts....Pages 277-285 Studies on the Structures and Optical Properties of Tio2 Doped with Transition Metals....Pages 287-293 Synthesis and Deposition of Catalytic CeO2 Nanocrystals Via Aqueous Solution Process....Pages 295-305 Front Matter....Pages 307-313 Coarsening Kinetics of Grain Boundary in a Cast Nickel Base Superalloy During Long Term Aging....Pages 315-315 Development of Economically Doped Heat-Resistant Nickel Single-Crystal Superalloys for Blades of Perspective Gas Turbine Engines....Pages 317-325 Front Matter....Pages 327-336 Dynamics of Recrystallization Behavior and Grain Growth Behavior of Nb-Ti-Al Superalloy....Pages 315-315 Effect of Long Time Thermal Exposure on Microstructure and Mechanical Properties of C276 Superalloy....Pages 337-344 Friction and Wear Properties of Sintered Sulfur-Containing High-Speed Steels at Elevated Temperature....Pages 345-352 Fully Dense Fine Grained Feal-Based Intermetallics Prepared by Spark Plasma Sintering Method....Pages 353-359 Grain Growth Behavior of a Ni-Cr Based Superalloy Gh4033 in Reheating Process Prior to Hot Rolling....Pages 361-368 Heat Treatment Effects on the High Temperature Mechanical Behavior of Directionally Solidified Mar-M247 Superalloy....Pages 369-377 Influence of Alloying Elements on Deformability of High Nb Containing Tial Alloys....Pages 379-386 Methodologies for Long-Term Creep Life Extrapolation of GR. 91 Steel....Pages 387-395 Microstructural change of monocrystalline Co-Al-W-based γ/γ′ two phase alloys by high temperature creep....Pages 397-408 Microstructure Evolution and Creep Behaviors of a [111] Oriented Single Crystal Nickel-Based Superalloy....Pages 409-414 Oxidation Response of Pack Cementation Coated TZM (MO-0.5TI-0.1ZR-0.02C) Alloys under Dynamic Environments....Pages 415-423 Planar Defects and Dislocations in Transition Metal Disilicides....Pages 425-430 Precipitation of the Gamma Prime Phase in a Ni-Co-Based Superalloy during Different Stages of Cooling....Pages 431-437 Preparation and Microstructure of Carbon/Carbon Composites Modified with Zr-Ti-C Fabricated by Reacted Melt Infiltration....Pages 439-446 Preparing SiC-TiB2 Composite via Liquid Phase Sintering....Pages 447-456 Reaction Synthesis Mechanism of TiAl Alloy Fabricated by Hot Pressed Sintering with Mixed Powders of TiH2 and Aluminum....Pages 457-462 Study on the Strain Rate Sensitivity of a Ni-Based Superalloy....Pages 463-467 Tensile Anisotropy of a Single Crystal Superalloy....Pages 469-474 The Effect of Silicon Additions on the Thermal Stability and Morphology of Carbides in a Ni-Mo-Cr Superalloy....Pages 475-484 Titanium Aluminum Alloy Fabricated by Pressure Infiltration and Heat Treatment....Pages 485-492 Front Matter....Pages 493-499 Correlation of Microstructures with Mechanical Properties in Recrystallized 15Cr-ODS Steels....Pages 315-315 Determination of Fracture Toughness Values of Two Ni — Base Super Alloys for High Temperature Applications....Pages 501-508 Effects of Al Addition on the High Temperature Oxidation Behavior of CM-247 LC Ni-Based Superalloy....Pages 509-520 Effects of Alloying Elements on Thermal Aging Embrittlement of 15Cr Ferritic Alloys....Pages 521-527 Fracture Characteristics of a Single Crystal Nickel-Based Superalloy....Pages 529-535 Study on Precipitation Behavior of δ Phase in IN718 Alloy by Electric Field Treatment....Pages 537-544 The Effect of Grain Boundary Character Distribution on Oxidation Resistance of ZG30Cr20Ni10 Heat Resistant Steel....Pages 545-552 Front Matter....Pages 553-560 Characteristics of Deformation Induced Martensite in SUS304 Austenitic Stainless Steel Deformed at RT and −60°C....Pages 561-561 Aging Precipitation and Recrystallization Behavior After Cold Compression by 10% In High-Nitrogen Austenitic Stainless Steel....Pages 563-569 Determination of α / γ Phase Boundaries in the Fe-Cr-Ni-Mn Quaternary System with a Diffusion-Multiple Method....Pages 571-576 Effect of Prior Austenite Grain Size on Hydrogen Embrittlement Behaviors In 8Ni-0.1C Steel....Pages 577-582 Effect of Al Content on Tensile Deformation and Fracture Behavior Transition Due to Strain-Rate Change in Fe-Si-Al Alloys....Pages 583-589 Influence of Silicon Addition on the Low Temperature Toughness of Pressure Vessel Steels....Pages 591-596 Effect of Ferrite Grain Size on Local Elongation in a Low Carbon Steel....Pages 597-602 Evolution of Microstructures and Texture of 1.3%Si Non-Oriented Electrical Steel in the Twin-Roll Strip Casting Process....Pages 603-608 Influence of Pre-Oxidation on the Corrosion Behavior of Weathering Steel....Pages 609-614 Rusting Evolution and Anti-Corrosion Mechanism of MnCuP Weathering Steel in Simulated Atmospheres....Pages 615-622 Selective Corrosion of Stainless Steel at Low pH....Pages 623-629 Fitting and Evolution of Atmospheric Corrosion of Low Alloy Steels under Wet/Dry Cyclic Corrosion Test....Pages 631-637 Study on the Corrosion Resistance of Hot Rolled Rebar Quenched with a New Chemical Reagent....Pages 639-644 Front Matter....Pages 645-650 The Corrosion Resistance of Weathering Steels in Atmospheric Exposure and Laboratory-accelerated Corrosion Tests....Pages 561-561 Formation of Equiaxed Crystals by Complex Inclusions during Solidification of Advanced High Strength Steel....Pages 651-656 Low-cycle fatigue properties of the Fe-30Mn-(6-x)Si-xAl TRIP/TWIP alloys....Pages 657-663 In Situ Observation of the Microstructure Evolution in HAZ and Analysis by EBSD....Pages 665-671 Low-Cost and Time-Saving Thermomechanical Treatment on 54SiCr Steel....Pages 673-678 Preferential Precipitation of Cementite in Ferrite under a High Magnetic Field....Pages 679-685 Studying the Hot Working Characteristics and Dynamic Recrystallization Behavior of Conventional Low Carbon Steel during In-Line Strip Production Process....Pages 687-693 Influence of Different Parameters on Theoretical Flame Temperature Before Tuyere in Corex Melter Gasifier....Pages 695-702 Influence of the Pulverized Coal Ash on Theoretical Flame Temperature Before Tuyere in BF....Pages 703-712 Removal of Phosphorus, Sulphur, and Arsenic from Ferronickel and Nickel Alloys....Pages 713-723 Molten Mold Flux Technology for Continuous Casting of the ULC and TWIP Steel....Pages 725-733 Effect of Steel Composition on the Scale Layer Composition in Continuous Casting....Pages 735-745 Formation and Evolution of Spinel Inclusions during Al-Killed Steel Refining....Pages 747-752 Development of a heat recovery system from steelmaking slag....Pages 753-760 Heat Transfer Charactaristic in a Slag Heat Recovery Chamber....Pages 761-768 Thermodynamic Analyses of Iron Oxides Redox Reactions....Pages 769-776 Microstructure Evolution in the Heat-Affected Zone of Zr -Ti Microalloyed High-Strength High-Toughness Offshore Structural Steels....Pages 777-789 Evaluation of Kinetic Equation of Athermal Martensitic Transformation in Low Carbon Steels....Pages 791-796 Effects of Isothermal Process on Content of Retained Austenite in High Chromium Cast Steels....Pages 797-802 Quenching and Partitioning (Q&P) Processing of AISI 420 Stainless Steel....Pages 803-808 Front Matter....Pages 809-817 Q-P Process on Steels with Various Carbon and Chromium Contents....Pages 561-561 Newly Developed Advanced High Strength Steels for Automotive Lightweight Applications....Pages 819-824 Effects of Heating Rate on the Phase Transformation Temperature of Austenite in M Steel Sheet....Pages 825-834 Effects of Negative Gradient Magnetic Field on the Carbon Diffusion Behavior in Pure Iron....Pages 835-838 Equipment and Automation of Blast Furnace Ironmaking Process....Pages 839-845 Factors Affecting the Mixing Characteristics of Molten Steel in the RH Refining Process....Pages 847-861 High Speed and Stable Continuous-Casting Technique on No.4CCM in JFE Steel Corporation Kurashiki Works....Pages 863-870 High-Temperature Deformation Behavior of Carbon Steel Containing Dispersed Fine Voids....Pages 871-878 Microstructual Evolution of a Medium Carbon Advanced High Strength Steel Heat-Treated by Quenching-Partitioning Process....Pages 879-884 Self-Repairing of Damaged Rust Layers on Carbon Steel and Weathering Steel....Pages 885-889 Static Model for Converter Steelmaking by Using Limestone....Pages 891-898 Study for Influence of Prereduction Degree on the Softening and Melting Properties of Sinter....Pages 899-906 Study of Rack and Chord Assembly Formability for Jack-Up Platforms....Pages 907-918 The Effects of Shot-Peening on Surface Residual Stress of Advanced Ultrahigh-Strength Trip-Aided Steels....Pages 919-926 The Development of Microalloyed Hot-Rolled High-Strength Auto Structural Steel with High Ti Content....Pages 927-935 The Production of Bio-Steel and its Applied Research on Watches....Pages 937-941 Zinc Distribution in Blast Furnace and its Damage Mechanism....Pages 943-953 Front Matter....Pages 955-962 Control of Textures in Aluminum Solid Solution Alloys by High-Temperature Deformation....Pages 963-963 Deformation Behavior of Lpso Phase and Zn Accompanied by Kink Band Formation....Pages 965-972 Deformation Behavior of Mg-Y and Mg-Al-Zn Alloy Single Crystals in Compression....Pages 973-978 Front Matter....Pages 979-985 Development of Advanced Aluminum Alloys with Nano-Hetero Structures and Their Mechanical Properties....Pages 963-963 Development of Al-TiC Alloys Using Powder Metallurgy as Grain Refiners for Aluminium and Its Alloys....Pages 987-996 Effect of Combined Electromagnetic Fields on the As-Casting Structure and Mechanical Property of HDC Casting 7075 Al Alloy Ingot....Pages 997-1007 Effect of Heat Treatment on Fatigue Behavior and Mechanical Properties of Al 7021-T6.....Pages 1009-1016 Effect of Rotating Gas Bubble Stirring Treatment on the Microstructures of Semi-Solid AZ91–2Ca Alloy....Pages 1017-1023 Effects of Electromagnetic Field on Horizontal Continuous Casting of 6061 Aluminium Alloy Bar Process....Pages 1025-1033 Elimination of Iron in Molten Aluminum Scrap by Electromagnetic Stirring Technique....Pages 1035-1040 Formability of Mg-Li Alloy Sheet by Square Cup Deep Drawing....Pages 1041-1047 Friction Stir Lap Welding of Al and Mg Alloys: Deformation and Joint Strength....Pages 1049-1056 High Strain Rate Superplasticity of a Fine-Grained AZ91 Magnesium Alloy Prepared by Friction Stir Processing....Pages 1057-1064 Improvement of Mechanical Properties and Microstructure of Twin-Roll-Cast AMX1001 Magnesium Alloy by Rolling Process....Pages 1065-1071 Influence of Extrusion Ratio on Microstructure and Mechanical Behavior of MG-9LI-3AL-2.5SR Alloy....Pages 1073-1078 Investigation of Abnormal Grain Growth in a Friction Stir Welded and Spin-Formed Al-Li Alloy 2195 Crew Module....Pages 1079-1089 Lattice Rotation Due to Cold-Rolling on 1050 Aluminum with Near Rotated Cube Orientations....Pages 1091-1099 Mechanical Properties and Formability of Titanium-Clad Magnesium Alloy Sheets....Pages 1101-1107 Microstructural Characterization of Metastable Phases in Homogenised and Aged Mg-Nd and Mg-Gd-Nd Alloys Containing Zn, Y and Zr....Pages 1109-1114 Microstructural Control and Mechanical Properties of Low-Cost Titanium Alloys for Next Generation Aircrafts....Pages 1115-1122 Preparation of Large Scale Magnesium Alloy Billets by LFEC Processing....Pages 1123-1130 Quantitative Analysis of Twinning-Induced Plasticity (TWIP) in Beta-Titanium Alloy....Pages 1131-1138 Front Matter....Pages 1139-1147 Relationship Between Aluminum Oxide Inclusion and Porosity in Aluminum Melt....Pages 1149-1156 Textural Stability During Annealing in Aluminum Subjected to Shear Deformation....Pages 963-963 The Effect of Ca Additions on the Mechanical Properties of Mg-Al-Sn Alloys....Pages 1157-1162 The Precipitation Behavior of α Phase in a New Near β Titanium Alloy Ti-7333 During Aging Process....Pages 1163-1168 Thermodynamic Analysis of the Mg-Y-Zn Ternary System Using the Cluster Variation Method....Pages 1169-1174 Age-Hardening Behavior of Deformed Excess Mg-Type Al-Mg-Si Alloys....Pages 1175-1182 Aging Behavior and Microstructure Observation of MgB2/Al-1mass%Mg2Si Composite Materials....Pages 1183-1190 Effect of Ca Addition on the High-Temperature Deformation Behavior of AZ31 Magnesium Alloy....Pages 1191-1196 Effect of Crystal Grain Orientation on Grain Boundary Fracture in Polycrystalline Al-Zn-Mg-Cu Alloy....Pages 1197-1202 Effect of Cu / Ag Addition on the Age-Hardening Behavior in Al-Mg-Ge Alloys....Pages 1203-1209 Effect of Rolling on the High Strength of 6N01 Aluminum Alloy....Pages 1211-1216 Effect of Shot Peening on Bending Strength of AZ31 Magnesium Alloy Pipe....Pages 1217-1222 Effect of Si and Ca Additions on Microstructure of As-Cast Mg-Sn-Sr Alloy....Pages 1223-1228 Effects of Annealing Temperature on the Recrystallization Behavior and Microstructure of Al-Mn Alloys with Different Second Phase Particles....Pages 1229-1236 Grain Refinement in Pure Mg and Mg-Zn Alloys during Hot Compression Test....Pages 1237-1240 Growth of the AIN and Fe-Al Intermetallic Compound Multilayer as Different Nickel Concentration....Pages 1241-1247 Hot Deformation Behavior of an Al-7.6Zn-1.8Mg-1.4Cu-0.12Zr Alloy....Pages 1249-1256 HRTEM Observation of Precipitation in Mg-Gd-Y Alloys during Aging at 473K....Pages 1257-1263 Influence of High Magnetic Field on Intermediate Phase Growth in Mg-Al Diffusion Couple....Pages 1265-1270 Influence of Y on the Microstructure, Mechanical Properties and Fracture Mechanism of Mg-8Li-3Zn Alloy....Pages 1271-1276 Front Matter....Pages 1277-1282 Influence of Y/Zn Mole Ratio on the Phase Composition and Mechanical Properties of Mg-Y-Zn Alloys....Pages 1283-1290 Investigation on Microstructure in As-Cast Aluminum Alloy 7136 and Its Evolution During Homogenization....Pages 963-963 Microstructural Features and Age Hardening in an Al-Mg-Ga Sacrificial Anode Alloy....Pages 1291-1298 Microstructure and Mechanical Behavior of As-Cast, Extruded and Nanocrystalline Mg-9Li-3Al-2.5Sr Alloy....Pages 1299-1305 Microstructure Evolution of AZ91D Magnesium Alloy During Extrusion-Torsion Simultaneous Processing....Pages 1307-1312 Observation of Equilibrium Phase for Cu or Ag Addition Al-Mg-Si Alloys....Pages 1313-1321 Recovery and Recrystallization in 1050 Aluminum Alloy After Cold-Rolling at 50%....Pages 1323-1328 Study on the Hot Tearing Susceptibility of Mg-7Al-xCa-2Si-0.8Zn-0.5Sr-0.4Mn Heat-resistant Magnesium Alloys....Pages 1329-1334 Variation of Aging Behavior for Cu or Ag Addition Al-Zn-Mg Alloys....Pages 1335-1340 Front Matter....Pages 1341-1348 A Novel Technique to Develop a Hybrid Al-Al2O3-Intermetallic Fibers in MMC or FGM Structure....Pages 1349-1354 Aluminum/TPG Metal Matrix Composite with Improved Thermal Conductivity....Pages 1355-1362 An Approach to Improve the Tensile Ductility of Particle Reinforced Ultrafine-Grained Metallic Composite by Nano-Dispersion Toughening....Pages 1363-1363 Bulk NiTip/Al Composites Prepared by Friction Stir Processing....Pages 1365-1370 Effect of High Magnetic Fields on Annealing of Nanostructured Multilayers....Pages 1371-1377 Fabrication of Al/Cu Composite Using Multiple Hydrostatic Extrusion Process and its Material Properties....Pages 1379-1385 Influence of Heat Treatment on Corrosion and Wear Resistances of Mild Steel with Ni-P-Al2O3 Composite Film....Pages 1387-1393 Interfacial Morphology on Mechanical Behavior of Particle Reinforced Metal Matrix Composites....Pages 1395-1400 Interfacial Properties of Ti-6Al-4V/SCS-6 Continuous Fibre Reinforced Composite....Pages 1401-1407 Localized Melting Phase Induce Nontraditional Interphase in Al/Mg Metal Matrix Composite....Pages 1409-1416 Front Matter....Pages 1417-1424 Low-Velocity Impact Response of Sandwich Composites with FRP Facesheets and Nanoclay-Wood Flour Modified Polyurethane Foam....Pages 1425-1432 Manufacturing Process of Celmet Reinforced Aluminum Alloy Composite by Low-Poressure Casting....Pages 1433-1440 Micromechanics-Based Examination of Thermo-Mechanical Response of ZrO2/Ti Functionally Graded Materials Fabricated by Spark Plasma Sintering....Pages 1363-1363 Microstructures and Mechanical Properties of Carbon Tubes Reinforced AZ91D Magnesium Matrix Composites Prepared by Squeeze Casting....Pages 1441-1446 Multilayerd metal-ceramic composites made by coating technologies....Pages 1447-1452 Preparation and Characterization of Diamond/Cu Composites....Pages 1453-1461 Relationship Between Microstructure and Electrical Conductivity of TiB2 Particle Dispersed Al Composites by Spark Sintering Process....Pages 1463-1470 Role of Si in the Wetting of α-SiC by Al....Pages 1471-1478 Superplasitic Tensile Behavior of in Situ TiBw/Ti6Al4V Composite with Novel Network Microstructure....Pages 1479-1486 Synthesis and Characterization of Fluorine-Doped Tin Dioxide Nanocomposites....Pages 1487-1492 Synthesis and Properties of Metal Matrix Nanocomposites (MMNCS), Syntactic Foams, Self Lubricating and Self-Healing Metals....Pages 1493-1500 Topological Interlocking as a Design Principle for Hybrid Materials....Pages 1501-1506 Front Matter....Pages 1507-1514 Mechanical Properties of Meta-Stable Ti-Cr-Sn-Zr Alloys....Pages 1515-1524 Aesthetic and Mechanical Properties of Oxide Coated Ti-Nb-Ta-Zr Alloys as a Dental Material....Pages 1525-1534 Mechanical Properties of Ti-12Cr Alloy with Self-Tunable Young’s Modulus for Use in Spinal Fixation Devices....Pages 1535-1535 Large Elastic-Like Strain in an Fe-31.2Pd (at.%) Alloy Exhibiting a Second-Order-Like FCC-FCT Martensitic Transformation....Pages 1537-1542 Borate Glass Nano Fiber/Whiskers in a Hybrid Orthopedic Composite Implants for Wound Healing and Bone Regeneration....Pages 1543-1550 Porous Titanium Implant and Micro-CT Based Characterization of Sub-Surface Morphology....Pages 1551-1556 Direct Laser Forming for More Complex Shaped Titanium Alloy Compacts....Pages 1557-1565 Studies on the Competitive Interaction of Glutathione with 3-Aminopropyl Trimethoxysilane-Stabilized Gold Nanoparticles....Pages 1567-1577 Front Matter....Pages 1579-1586 Cross Sectional TEM Observations and Elemental Mapping on Anodic Oxidation Surface Films of Titanium Alloy....Pages 1587-1595 Osteoblast responses to the modified surface of porous titanium....Pages 1597-1602 Analytical Model for Polymerization Characteristic of Dental Composite Resin....Pages 1535-1535 Antibacterial Ceramic Fabricated by the Ti-Bearing Blast Furnace Slag....Pages 1603-1610 Deformation Induced Changeable Young’s Modulus in Ternary Ti-Cr-O Alloys for Spinal Fixation Applications....Pages 1611-1617 Electrochemical Etching of Nitinol Using a New Electrolyte Solution....Pages 1619-1625 Microstructure, Mechanical Properties and Biocompatibility of Ti-Nb Based Composite with CPP Fabricated by Rapid Sintering....Pages 1627-1634 Plasma Electrolytic Oxidation of Pure Magnesium for Potential Biological Application....Pages 1635-1641 Polymer-Cu/TiO2 Antimicrobial Coatings....Pages 1643-1648 Preparation and Optical Properties of Amorphous Sio Nanowires....Pages 1649-1653 Preparation of Ag-Doped Calcium Phosphates....Pages 1655-1662 Front Matter....Pages 1663-1669 Advances in Rare-Earth-Free Permanent Magnets....Pages 1671-1678 All-Solid-State 2-Dimensional Li Battery....Pages 1679-1685 High Anisotropy and High Electrical Resistivity Nd-Fe-B/CaF2 Composite Magnets with Laminated Structures....Pages 1687-1687 Hybrid Nanoscale Magnetic Composites....Pages 1689-1696 Investigation of Low Melting-Point Boundary Phase in Sintered (Ce,Nd)-Fe-B Magnets....Pages 1697-1703 Magnetic, Magnetocaloric and Electrical Properties in Bulk Nanocrystalline Gd Metals....Pages 1705-1708 Magnetic microstructures of high performance permanent magnetic materials....Pages 1709-1721 Meallization from Neodymium (III) Compound by Chemical and Electrowinning Process....Pages 1723-1727 Radiation Damage in GaN-Based Materials and Devices....Pages 1729-1736 Front Matter....Pages 1737-1744 Status and Preparation Technology of Rare Earth Materials....Pages 1745-1751 Study on Infrared Transmission Property of Mercury Indium Telluride Single Crystal....Pages 1753-1764 Surface Nano-Modification and Low-Temperature Crystallization of Si-Related Semiconductors by Soft X-Ray Irradiation....Pages 1687-1687 Synthesis and Characterization of Yttrium Titanate and Er Doped Yttrium Titanate Nanofibers....Pages 1765-1774 Thick-film Magnets for MEMS Applications....Pages 1775-1782 Recycle Rare Earth from Wastephosphor by a Two-Step Method....Pages 1783-1793 An Analysis of the Magnetization Behavior and Temperature Dependence of Coercivity in Hot Deformed Nd2Fe14B Magnets with Different Deformation Degrees....Pages 1795-1802 Electrochemical Hydrogen Storage Kinetics of the AS-Melt La0.75-xMxMg0.25Ni3.2Co0.2Al0.1 (M=Zr, Pr; x=0–0.2) Alloys Applied to Ni-MH Battery....Pages 1803-1812 Magnetism and Electronic Structure Calculations of Pd-TM Alloys and Hydrogen Systems....Pages 1813-1820 Front Matter....Pages 1821-1828 Adhesion Strength of the Interface Between TiN Film and White Layer....Pages 1829-1836 Allylamine Functionalization of 3C-SiC Thin Film....Pages 1837-1841 A Study on Contact Resistance Failure Between Al-Ti-TiN Multi-Layer and W-Via Caused by Hillock Formation....Pages 1843-1843 Comparison in Abrasion Resistance Between Hardened 8620 Steel and Coated by Ti/TiN....Pages 1845-1852 Corrosion Behavior of 21%CR Ferritic Stainless Steel at Atmospheric Environment....Pages 1853-1861 Duplex Stainless Steel Surface Treatment by Plasma Transferred Arc....Pages 1863-1870 Effect of Growth Temperature on GaN Films Deposited on Stainless Steel Substrates by ECR-PEMOCVD....Pages 1871-1877 Effects of Tungsten and Laser Re-Melting on the Properties of Hastelloy C22 Coating....Pages 1879-1884 Electrochemical Codeposition of Ti-dispersed Ni-matrix Layers by Pulse-Form Current....Pages 1885-1892 Engineering Thin Film Semiconductor Gas Sensors to Increase Sensitivity and Decrease Operation Temperature....Pages 1893-1900 Influence of The Cu Content on the Structure and Properties of Me-Cu-N (Me=Zr,Ti) Nanocomposite Films Deposited by Pulsed Bias Arc Ion Plating....Pages 1901-1908 Front Matter....Pages 1909-1916 Influence of the Lubricant Temperature and Operation Charge in Metallic Surfaces Wear....Pages 1917-1928 Influence of Yttrium on Microstructure and Properties of Ni-Al Alloy Coatings Prepared by Laser Cladding....Pages 1929-1937 Microhardness and Deformation Storage Energy Density of NiTi Thin Films....Pages 1843-1843 Model for Atomic Layer Deposition of Aluminum on Inner Wall of Rectangular Pipes with Large Length Aspect Ratio....Pages 1939-1950 Molten Salt Multi-Anode Reactive Alloy Coating (Marc) of Ta-W Alloy on Sus316l....Pages 1951-1958 Nanocrystalline Antimony-doped Tin Oxide Films Prepared by Sol-Gel....Pages 1959-1966 Nanoscale Ductility Mechanisms in Cu/Ag Nanolayered Metals....Pages 1967-1973 STM and ARPES Study of Ordered Ce Film and Its Initial Oxidation....Pages 1975-1981 Study on Improving Surface Characteristics of Stainless Steel Alloys by Electropolishing....Pages 1983-1990 Thermomechanical stress driven Ag direct bonding....Pages 1991-1999 Effects of Processing Temperatures on the Characteristics of the Surface Hardened Layer Produced on Duplex Stainless Steel by Low Temperature Plasma Nitrocarburizing....Pages 2001-2009 Formation of Fe-Al Intermetallic Compound Film on Hot Work Tool Steel by Shot Lining and Heat Treatment....Pages 2011-2015 Giant Magnetoresistance of CoNi/Cu Multilayered Nanowires Electrodeposited into Anodized Aluminum Oxide Nanochannels....Pages 2017-2023 Interdiffusion Behavior at Interface Between NiAlHfSi Coatings and Ni3Al Based Superalloy Substrates....Pages 2025-2033 Low-Temperature Grown InN Films Based on Sapphire Substrate with ECR-Plasma Enhanced MOCVD....Pages 2035-2042 Mechanism of Formation of Whisker in Deformed Pure-Sn Thin Film....Pages 2043-2050 Microstructural and Corrosion Characterizations of Nickel-Titanium Coatings Produced by Electrochemical Codeposition and Heat Treatment....Pages 2051-2060 Prevention of Soot Deposition in Direct Carburizing by Injection of Water Vapor....Pages 2061-2067 Stability of Structural Ceramic Materials in Liquid Bismuth Cathode....Pages 2069-2074 Strontium Titanate Buffer Layers on Cu/33%Ni Substrates Using a Novel Solution Chemistry....Pages 2075-2082 Front Matter....Pages 2083-2088 Structural and Electrical Properties of High C-Orientation Gan Films on Diamond Substrates with ECR-PEMOCVD....Pages 2089-2094 Structural and Mechanical Properties of TiON Nanocomposite Films Deposited on Silicon by Pulsed Bias Arc Ion Plating....Pages 2095-2101 Surface Characteristics and Electric Conductivity of MWCNTS/Feve Copolymer Composite Coatings....Pages 1843-1843 ZnTe Compound Semiconductor Thin Films Electrodeposited from Acidic Aqueous Solution....Pages 2103-2110 Front Matter....Pages 2111-2115 Gmaw Shielding Gas Flow Optimisation by Refinement of Nozzle Geometry....Pages 2117-2122 Recent Developments in Flat Rolling Technologies....Pages 2123-2128 Relation Between Plating Current Density and Microwave Properties of Thin Magnetic Film....Pages 2129-2129 Surface Structure and Particle Analysis of Combined SnO2 and ZnO Nanoparticles Prepared for Gas Sensing....Pages 2131-2137 Analysis to the Application of Hydrogen Bell-Type Annealing Furnace in Baosteel Stainless Steel....Pages 2139-2146 Corrosion Analysis of Zinc Rich Epoxy Coatings on Steel in NaCl Solution....Pages 2147-2155 Improvement on Strength Performance of Hot Dip Galvanized 340BH Automotive Steel Sheet....Pages 2157-2162 Microstructure and Properties of Low Manganese API X70 Pipeline Steel for Sour Service Application....Pages 2163-2169 Study on Dimensional Stability of 1Cr18Ni9Ti Stainless Steel and its Mechanism....Pages 2171-2176 Grain Boundary Engineering of SUS304 by Laser Shocking and Annealing....Pages 2177-2182 Improvement of Mechanical Property in Weld Metal Formed with F-MAG Welding Method in Steels....Pages 2183-2190 Study on Optimizing the Sintering Proportioning by Experiment....Pages 2191-2198 Study on the Mold Slag with High Al2O3 Conte