Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018) : Volume 1

"The book includes the best articles presented by researchers, academicians and industrial experts at the International Conference on “Innovative Design and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)”. The book discusses new concept in designs, and analysis and manufacturing technologies for improved performance through specific and/or multi-functional design aspects to optimise the system size, weight-to-strength ratio, fuel efficiency and operational capability. Other aspects of the conference address the ways and means of numerical analysis, simulation and additive manufacturing to accelerate the product development cycles.Describing innovative methods, the book provides valuable reference material for educational and research organizations, as well as industry, wanting to undertake challenging projects of design engineering and product development."-- Volume 1, back cover Front Matter ....Pages i-xiv Performance Analysis of Semi-active Suspension System Based on Suspension Working Space and Dynamic Tire Deflection (Jaydeep Funde, K. P. Wani, N. D. Dhote, S. A. Patil)....Pages 1-15 Study on Wear Behavior of Al-Based Hybrid Metal Matrix Composites Reinforced with Al2O3/SiC Particles (H. P. Raturi, Lalta Prasad, M. Pokhriyal, A. Kumar)....Pages 17-25 Development of Simulation Model for Effective Testing and Verification of Servo Vacuum Booster (A. Selwin Mich Priyadharson, S. Vinson Joshua, B. Senthil Kumaran)....Pages 27-32 Investigation of Relation Between Ignition Timing and Advance Angle to Improve Engine Performance (Aditya Balkrishna Kale, Jyoti Madhav Phate, Prashant Sarjerao Munfan, Yogesh Suresh Chavan)....Pages 33-39 Experimental Investigation of Vapour Absorption Refrigeration Cycle for Automobile Cabin Cooling (Sahadev M. Jadhav, M. Arulprakasajothi, U. Chandrasekhar, D. Yuvarajan)....Pages 41-51 Effects of Nano- and Micro-Filler on Water Diffusion and Leakage Current of GRP Composites (Santhy P. Kuruvilla, N. M. Renukappa)....Pages 53-61 Effect of Interleaving and Low Velocity Impact on the Dielectric Properties of Composite Laminates (M. Umashankar, N. M. Renukappa, M. S. Lavanya, Kunigal Shivakumar)....Pages 63-71 Numerical Modeling and Study of Vaporization of Single Droplet and Mono-dispersed Spray Under Mixed Convection Conditions (Sumer Dirbude, Abhijit Kushari, Vinayak Eswaran)....Pages 73-82 Incremental Sheet Forming: An Experimental Study on the Geometric Accuracy of Formed Parts (Rahul Jagtap, Shailendra Kumar)....Pages 83-89 Experimental Analysis of Implementing Roughness on NACA 0018 Airfoil (E. Livya, R. Sai Anirudh, V. Vignesh, B. Prasannavenkatesh, S. Nadaraja Pillai)....Pages 91-96 Numerical Investigation of Siting the Wind Turbine on Vel Tech University Campus (S. M. Vignesh, J. Karthik, R. Jaganraj)....Pages 97-110 An Improved Unsteady CFD Analysis of Pitching Airfoil Using OpenFOAM (P. Srinivasa Murthy)....Pages 111-117 Development of 12 Channel Temperature Acquisition System for Heat Exchanger Using MAX6675 and Arduino Interface (Sandeep P. Nalavade, Abhishek D. Patange, Chandrakant L. Prabhune, Sharad S. Mulik, Mahesh S. Shewale)....Pages 119-125 Optimization of Clutch Cover Mounting Base Plate Through Twin Threaded Grub Screw (T. V. B. Babu, R. Anbazhagan, V. Sathiyamoorthy, K. Arumugam, R. Suresh)....Pages 127-133 Active Vortex Shedding Control for Flow Over a Circular Cylinder Using Rearward Jet Injection at Low Reynolds Number (S. Karthikeyan, B. T. Kannan, S. Senthilkumar)....Pages 135-141 Performance Augmentation of Boron–HTPB-Based Solid Fuels by Energetic Additives for Hybrid Gas Generator in Ducted Rocket Applications (Syed Alay Hashim, Sanket Kangle, Srinibas Karmakar, Arnab Roy)....Pages 143-157 Experimental Investigation of Wear and Hardness Test Over AA2219 with Reinforcement of Tungsten Carbide (R. Rohith Renish, M. Arun Pranesh, K. Karthik, Vasavi Vanarasi)....Pages 159-165 Pedagogical Evaluation of Mechanical Engineering Education Using Additive Manufacturing (Saurabh Srivastava, Sarang Pande)....Pages 167-172 Numerical Investigation of Cu–H2O Nanofluid in a Differentially Heated Square Cavity with Conducting Square Cylinder Placed at Arbitrary Locations (Basant Kumar, Bishwajit Sharma, Rabindra Nath Barman)....Pages 173-179 Numerical Investigation of Single Ramp Scramjet Inlet Characteristics at Mach Number 5.96 Due to Shock Wave–Boundary Layer Interaction (K. Raja Sekar, S. Jegadheeswaran, R. Kannan, P. Vadivelu, G. Prasad)....Pages 181-186 Numerical Analysis of Discrete Element Camber Morphing Airfoil in the Reynolds Number of Conventional Flyers (T. Rajesh Senthil Kumar, Nikitha Narayanaprasad, Yashmitha Kumaran, V. Sivakumar, Balajee Ramakrishnananda)....Pages 187-193 Comparison of Quarter Car Suspension Model Using Two Different Controllers (Arivazhagan Anandan, Arunachalam Kandavel, Arockia Suthan Soosairaj)....Pages 195-204 Hot Forging Characteristics of Powder Metallurgy Duplex Stainless Steels Developed from 304L and 430L Pre-alloyed Powders (C. Rajkumar, R. Mariappan, S. Jayavelu, M. Arun Prasad, Ankam Vinod Kumar)....Pages 205-211 Machinability Studies of TiAlN-/AlCrN-Coated and Uncoated Tungsten Carbide Tools on Turning EN25 Alloy Steel (T. Sampath Kumar, A. Vinoth Jebaraj, K. Sivakumar, P. Mathivanan)....Pages 213-221 Study on Temperature Indicating Paint for Surface Temperature Measurement—A Review (P. L. Rupesh, M. Arul Prakasajothi, U. Chandrasekhar, Rajendra Mycherla, M. Bhanu Teja)....Pages 223-231 Inflight Parameter Estimation Framework for Fixed-Wing UAV (R. Jaganraj, R. Velu, P. Gokul Raj)....Pages 233-240 Experimental Studies on Surface Roughness of H12 Tool Steel in EDM Using Different Tool Materials (T. N. Valarmathi, S. Sekar, G. Anthony, R. Suresh, K. N. Balan)....Pages 241-247 Effect of Equivalence Ratio on Parameters of Coal-Fired Updraft Gasifier (Bhargav Manek, Hardik Ramani)....Pages 249-257 Numerical Analysis of Two-Phase Blood Flow in Idealized Artery with Blockage (Krunal Joisar, Ramesh Bhoraniya, Atal Harichandan)....Pages 259-267 Generalized Design of Experiments for Structural Optimization (A. V. Pavan Kumar, Karandas Kornaya, Srihari Bharadwaj, S. Sanjeev)....Pages 269-276 Numerical Prediction of Performance of a Double-Acting α-Type Stirling Engine (Hsi-Yao Yang, Yi-Han Tan, Chin-Hsiang Cheng)....Pages 277-288 Design Optimization, Automation and Testing Analysis of Dust Cleaning Mechanism for Solar Photovoltaic Power Plant (P. A. Patil, J. S. Bagi, M. M. Wagh, G. S. Patil)....Pages 289-299 Optimization of a Dual-Stepped Cone Inlet for Scramjet Applications (Subramanian Suryanarayanan, Nivetha Shyam, G. Devi, Giri Revanth Ravish)....Pages 301-306 Experimental Investigations for Improving the Strength of Parts Manufactured Using FDM Process (N. V. S. S. Sagar, K. S. Vepa)....Pages 307-313 Effects of Wall Thinning Behaviour During Pipe Bending Process—An Experimental Study (M. Karthikeyan, M. P. Jenarthanan, R. Giridharan, S. J. Anirudh)....Pages 315-324 Computational Simulation of Wind Flow Behavior Around a Building Structure (K. B. Rajasekarababu, G. Vinayagamurthy)....Pages 325-331 Numerical Analysis of Bubble Hydrodynamics in a Steam Reactor Chemical Looping Reforming System (Akash Chavda, Atal Harichandan)....Pages 333-341 Numerical Study of Flow Field Investigation of Air Jet Impingement on Different Solid Block Size (M. Muthukannan, P. Rajesh Kanna, P. Ganesan, V. Ganesh Moorthy, V. Dineshkumar)....Pages 343-351 Stress Intensity Factors for a Plate with Slant Edge Crack Built with Rapid Manufacturing Process (M. Afzal Bhat, A. A. Shaikh)....Pages 353-362 Design, Analyze, and Develop a Hybrid Silencer for 250 kVA DG Set (Saurabh Palnitkar, Loash Suri, Chandrabhushan Sugandhi, Prashant Anerao)....Pages 363-371 Design, Analysis, and Simulation of a Power-Split Device for Hybrid Two-Wheeler (Enanko Moulick, Kiran P. Wani, Sanjay A. Patil)....Pages 373-382 Development of Inhibition System for SIS Process (G. Bhuvaneshwaran, Mesfin Sisay, R. Manivannan, P. Arunkumar, M. Silambarasan)....Pages 383-389 Finite Element Analysis of Lifting Lugs Under Actual Factory Conditions (Mir Aamir Abbas)....Pages 391-397 Numerical Simulation of High Velocity Impact on Composite Targets Using Advanced Computational Techniques (K. Subramani, I. Vinoth kanna)....Pages 399-413 Study of Future Refrigerant for Vapor Compression Refrigeration Systems (I. Vinoth kanna, K. Subramani)....Pages 415-428 Numerical Simulation of Viscous Flow Past Elliptic Cylinder (Ranjith Maniyeri)....Pages 429-434 Processing and Evaluation of Mechanical Properties of Sisal and Bamboo Chemically Treated Hybrid Composite (R. Siva, T. N. Valarmathi, B. Siddardha, Kallat Sanjana, Bhasker Dakshin)....Pages 435-441 On the Surface Finish Improvement in Hybrid Additive Subtractive Manufacturing Process (Mayur Vispute, Narendra Kumar, Prashant K. Jain, Puneet Tandon, Pulak M. Pandey)....Pages 443-449 Impact of Control Unit Gains on Noise Mitigation in Swash Plate Pump Pumping Systems (Molham H. Chikhalsouk, Khalid Zhouri, Chandra Somayaji, Monsif Shinneeb)....Pages 451-460 Discussion of Past, Present and Future Perspectives of Refrigerants and Its Future Scope (I. Vinoth Kanna, A. Devaraj)....Pages 461-471 Analysis of Dynamic Probing Errors in Measuring Machines (Aitha Sudheer Kumar, C. Chandrasekaran)....Pages 473-482 Thrust Prediction Model for Varying Chamber Pressure for a Hypergolic Bipropellant Liquid Rocket Engine (P. Arun Kumar, C. Rajeev Senan, B. Ajith, Aishwarya Shankhdhar)....Pages 483-488 Experimental Studies on Different Proportions of CB-Filled Natural Rubber Composites with Precipitated Silica and Silica Gel (V. Chandran, N. Lenin, T. Maridurai, P. Jawahar, G. Vignesh, K. Sunil)....Pages 489-498 Fuzzy Logic Simulation for Automatic Speed Control System (Pajarla Saiteja)....Pages 499-509 A Review of Contemporary Research on Root Canal Obturation and Related Quality Assessment Techniques (Pravin R. Lokhande, Deenadayalan, Ratnakar R. Ghorpade, S. R. Srinidhi)....Pages 511-525 Adaptive Fault Tolerance Flight Controller for Aircraft Actuator Failure (M. Silambarasan, E. Balasubramanian, G. Surendar)....Pages 527-535 Back Matter ....Pages 537-539 The book includes the best articles presented by researchers, academicians and industrial experts at the International Conference on "Innovative Design and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)". The book discusses new concept in designs, and analysis and manufacturing technologies for improved performance through specific and/or multi-functional design aspects to optimise the system size, weight-to-strength ratio, fuel efficiency and operational capability. Other aspects of the conference address the ways and means of numerical analysis, simulation and additive manufacturing to accelerate the product development cycles. Describing innovative methods, the book provides valuable reference material for educational and research organizations, as well as industry, wanting to undertake challenging projects of design engineering and product development These two volumes gather the best articles presented by researchers and industrial experts at the International Conference on "Innovative Design and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018)". The papers discuss new design concepts, analysis and manufacturing technologies, with an emphasis on achieving improved performance by downsizing; improving the weight-to-strength ratio, fuel efficiency, and operational capability at room and elevated temperatures; reducing wear and tear; and addressing NVH aspects, while balancing the challenges of Euro IV/Barat Stage IV emission norms and beyond, greenhouse effects, and recyclable materials. The innovative methods discussed here offer valuable reference material for educational and research organizations, as well as industry, encouraging them to pursue challenging projects of mutual interest