Imaging Methods For Novel Materials And Challenging Applications, Volume 3: Proceedings Of The 2012 Annual Conference On Experimental And Applied ... Society For Experimental Mechanics Series)

__Imaging Methods for Novel Materials and Challenging Applications, Volume 3____: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics__, the third volume of seven from the Conference, brings together 62 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental and Applied Mechanics, including papers on: * Role of optical interferometry in advancement of material characterization * Three-dimensional imaging and volumetric correlation * Digital holography and experimental mechanics * Digital image correlation * Metrology and displacement measurement at different scales * Optical methods for dynamic tests * Optical methods for and with MEMS and NEMS * Thermomechanics and infrared imaging * Imaging methods applied to biomaterials and soft materials * Applied photoelasticity * Optical measurement systems using polarized light * Hybrid imaging techniques * Contouring of surfaces * Novel optical techniques Front Matter....Pages i-x Scale Independent Approach to Deformation and Fracture....Pages 1-7 Classical Optical Interferometry for Strain Measurement....Pages 9-16 Recent Advances in Holographic Strain and Stress Measurement....Pages 17-27 Digital Holographic Microscopy by Mirau Interferometric Objective....Pages 29-38 Digital Holographic Otoscope for Measurements of the Human Tympanic Membrane In-Vivo....Pages 39-45 Optical Fourier Transforms in the Nano Range....Pages 47-56 3D/4D Strain Mapping Using In-Situ X-Ray Microtomography....Pages 57-63 Dynamic Thermal Deformation Measurement Technique for Large-Scale High Temperature Piping....Pages 65-73 Hybrid Characterization of Laminated Wood with ESPI and Optimization Methods....Pages 75-83 Simultaneous Measurement of Plate Natural Frequencies and Vibration Mode Shapes Using ESPI....Pages 85-90 Damage Assessment in Composite Materials for Remnant Life Prediction....Pages 91-93 Application of Projection Moiré in Electronic Packaging and Assembly for Post-Surface Mount Warpage Measurements....Pages 95-100 Finite Element Modelling of Pulse Phase Thermography for Defect Detection....Pages 101-104 Thermoelastic Stress Analysis of a Mechanical Fastener....Pages 105-110 Through-Thickness Load Transfer in Adhesively Bonded Composite Joints....Pages 111-114 Thermal Infrared Imaging to Study Microstructural Damage and Failure in Aluminum Alloys....Pages 115-117 Quantitative Evaluation of the Nano-Scaled Polymeric Film System....Pages 119-125 Opto-Acoustic Technique to Evaluate Adhesion Strength of Nano-Scale Systems....Pages 127-132 Evaluation of Dynamic Deformation Behavior of Aluminum Alloy by Electronic Speckle Pattern Interferometry....Pages 133-139 Effect of Loading History of Aluminum on Fringe Pattern in Electronic Speckle Pattern Interferometry....Pages 141-147 Optical Interferometric Study on Loading Hysteresis....Pages 149-154 Recent Developments in the Contouring of Surfaces....Pages 155-163 Optical Head as a Gauge Device in Manufacturing....Pages 165-172 Comparison of Contouring Techniques Applied to Sheet Metal Testing....Pages 173-182 Application of Contouring to Dental Reconstruction....Pages 183-191 Nanotomography of Polymer Nanocomposite Nanofibers....Pages 193-198 Void Growth and Coalescence in Aluminum Alloy....Pages 199-202 3D Analysis of a Fatigue Crack in Cast Iron Using Digital Volume Correlation of X-ray Tomographic Images....Pages 203-209 Feasibility Study of 3D Digital Volume Correlation of Synchrotron Radiation Laminography Data for Displacement Field Measurement During Ductile Crack Initiation....Pages 211-215 Artifact Correction for DVC Measurements Using a Laboratory X-Ray Source....Pages 217-220 On the Resolution of Local and Global DIC Approaches....Pages 221-225 CAD-Based Calibration of a 3D DIC System....Pages 227-232 Impact of Lens Distortions on Strain Measurements Obtained with Digital Image Correlation....Pages 233-238 Optimized Patterns for Digital Image Correlation....Pages 239-248 Characterization of Compressive Properties of Polymer Foam Materials Using DIC and a Modified Arcan Fixture....Pages 249-254 The Effect of Texture on Superelasticity in Nickel-Titanium....Pages 255-262 Application of Full-Field Measurements to Analyse the Thermo-Mechanical Response of a Three-Branch Rubber Specimen....Pages 263-268 Intermittent Twin Region Nucleation Measurement Using Acoustic Emission....Pages 269-277 Microlithography Technique Advantages, Limits and Its Coupling with EBSD Measurements....Pages 279-285 Thermal Analysis of PZT Thin Films Using Digital Image Correlation....Pages 287-294 Uncertainty Assessment of DIC Under Heterogeneous Strain States....Pages 295-302 An Approach to Strain Measurement Uncertainty for DIC Using the SPOTS Calibration Procedure....Pages 303-309 Uncertainty Quantification for 3D Digital Image Correlation....Pages 311-317 Using Stokes Polarimeter for Linear Birefringence and Dichroism in Ferrofluid....Pages 319-326 Simultaneous Observation of Phase-Stepped Photoelastic Images Using Diffraction Gratings....Pages 327-332 Investigating High Strain Rate Behaviour of Foams Using Digital Image Correlation....Pages 333-335 Fabrication and Analysis of Small Flapping Wings....Pages 337-344 Investigating the Aerodynamic Effects of Flexible Membrane Wings....Pages 345-352 Thickness Effects on the Thermal Expansion Coefficient of ITO/PET Film....Pages 353-358 Photoelastic Testing and FE Analysis of T-Stub Model....Pages 359-367 An Instantaneous Phase Shifting Digital Shearography System for Dynamic Measurement....Pages 369-373 Dynamic Measurements with a Luminescent Photoelastic Coating....Pages 375-382 Measurement of Low Level Stress by Integrating Photoelasticity and Spectrometry....Pages 383-389 Instantaneous Phase-Stepping Photoelasticity and Hybrid Stress Analysis for a Curving Crack Under Thermal Load....Pages 391-402 Study of Crack Problems by the Optical Method of Caustics....Pages 403-409 Shock Wave Interaction with Periodic Obstacles....Pages 411-415 Finite Element Model Generation Based on Stochastic Analysis on AFM Images....Pages 417-421 ESPI Photoelastic Measurement of All In-Plane Stress Components....Pages 423-432 Applying the Grid Method to Investigate the Mechanical Behavior of Asphalt....Pages 433-438 Impulse Plug Measurements of Blast Reflected Impulse at Close Range....Pages 439-449 Imaging methods for novel materials and challenging applications represents the third of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress and Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11-14, 2012. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, Experimental and Applied Mechanics, Mechanics of Biological Systems and Materials, MEMS and Nanotechnology, and Composite Materials and Joining Technologies for Composites. his volume includes chapters which address constitutive, time (rate)-dependent constitutive and fracture/failure behavior of a broad range of materials systems, including prominent researches in both applied and experimental mechanics. Solicited chapters involve nonnegligible time-dependent mechanical response in cases incorporating nonmechanical fields. This book provides a platform for researchers to exchange ideas and to encourage cross-fertilization of various disciplines. It covers a wide range of imaging techniques and their applications in the following general areas: Role of optical interferometry in advancement of material characterization; Three-dimensional imaging and volumetric correlation; Digital holography and experimental mechanics; Digital image correlation; Metrology and displacement measurement at different scales; Optical methods for dynamic tests; Optical methods for and with MEMS and NEMS; Thermomechanics and infrared imaging; Imaging methods applied to biomaterials and soft materials; Applied photoelasticity; Optical measurement systems using polarized light; Hybrid imaging techniques; Contouring of surfaces; [and] Novel optical techniques This volume brings together sixty-two contributions to this important area of research and engineering. These papers present early findings and case studies on fundamental and applied aspects of experimental and applied mechanics, including papers on the role of optical interferometry in advancement of material characterization, three-dimensional imaging and volumetric correlation, digital holography and experimental mechanics, digital image correlation, metrology and displacement measurement at different scales, optical methods for dynamic tests, optical methods for and with MEMS and NEMS, and thermomechanics and infrared imaging