Energy Materials 2014 : conference proceedings : November 4-6, 2014, Xi'an, Shaanxi Province, China

This DVD contains a collection of papers presented at Energy Materials 2014, a conference organized jointly by The Chinese Society for Metals (CSM) and The Minerals, Metals & Materials Society (TMS), and held November 4-6, 2014, in Xi'an, Shaanxi Province, China. With the rapid growth of the world's energy production and consumption, the important role of energy materials has achieved worldwide acknowledgement. Material producers and consumers constantly seek the possibility of increasing strength, improving fabrication and service performance, simplifying processes, and reducing costs. Energy Materials 2014 has provided a forum for academics, researchers, and engineers around the world to exchange state-of-the-art development and information on issues related to energy materials. The papers on the DVD are organized around the following topics: Materials for Coal-Based Systems Materials for Gas Turbine Systems Materials for Nuclear Systems Materials for Oil and Gas Materials for Pressure Vessels Front Matter....Pages i-xvii Front Matter....Pages 1-1 The State-of-the-Art of Materials Technology Used for Fossil and Nuclear Power Plants in China....Pages 3-11 Energy Efficient Materials Manufacturing from Secondary Resources....Pages 13-22 Development and Applications of Pipeline Steel in Long-Distance Gas Pipeline of China....Pages 23-31 Factors Affecting the High Temperature Performance of Creep Strength Enhanced Ferritic Steels....Pages 33-42 Development of Advanced Ods Ferritic Steels for Fast Reactor Fuel Cladding....Pages 43-52 Development of Microalloyed Steels for The Oil and Gas Industry....Pages 53-60 Enhancing the Weldability of C-Mn Pressure Vessel Steels — A Tale of Two Elements....Pages 61-70 Corrosion of Advanced Steels: Challenges in the Oil and Gas Industry....Pages 71-79 Design Against Propagating Shear Failure in Pipelines....Pages 81-99 Front Matter....Pages 101-101 The Development of Boiler Pipes Used for 700°C A-USC-PP in China....Pages 103-110 Creep Strength Behavior of Boron Added P91 Steel and its Weld in the Temperature Range of 600–650°C....Pages 111-121 Development of Ferritic Heat-Resistant Steels Based on New Materials Design Concept for Advanced High Efficiency Power Plants....Pages 123-128 Alloy Design of Martensitic 9Cr-Boron Steel for A-USC Boiler at 650 °C — Beyond Grades 91, 92 and 122....Pages 129-136 Effect of Preferential Heat Treatment on Microstructure of New Martensitic Heat Resistant Steel G115....Pages 137-143 Study on Phase Stability of New Ni Based Superalloy Less 1 Designed to Low the ETA and Sigma Phase Fraction at 700 °C....Pages 145-150 Research on the Superheater Material Properties for USC Boiler with 700°C Steam Parameter....Pages 151-159 Creep-Rupture Behavior of Ni-Based Alloy Tube Bends for A-USC Boilers....Pages 161-168 Performance Evaluation and Analysis for P92 Extrusion Pipes....Pages 169-174 Effect of Alloying Additions on Oxidation Behaviors of Ni-Fe Based Superalloy for Ultra-Supercritical Boiler Applications....Pages 175-184 An Experimental Study on the Low Cycle Fatigue Behaviors of Domestic IP Rotor Steel for 1000MW Ultra-Supercritical Turbine....Pages 185-192 Front Matter....Pages 101-101 The Microstructural Evolution of Haynes 282 Alloy During Long-Term Exposure Tests....Pages 193-202 Alloy 740H Component Manufacturing Development....Pages 203-210 Advances in Large Nickel Alloy Turbine Castings for +700°C Operation....Pages 211-218 Benchmarking of Influential Factors and Energy Consumption in Shougang Three Plants....Pages 219-226 Development of Advanced Heat Resistant Materials for IGCC And AUSC Power Plants....Pages 227-234 Stability of Microstructure and Mechanical Properties of a Ni-Based Superalloy for Advanced Ultra-Supercritical Fossil Power....Pages 235-241 Studies on High Temperature Corrosion of Austenitic Heat-resistant Steels Super 304H/10Cr18Ni9Cu3NbN in Simulated and Real Combustion Gas Atmospheres....Pages 243-250 The Effect of Shot Peening on the Oxidation Resistance of Super304H Steels in Water Vapor....Pages 251-259 Relationship between Microstructure and Properties under Simulated On-Fire Processing Conditions of Q345R Boiler Steel....Pages 261-269 Recent Developments in Niobium Containing Austenitic Stainless Steels for Thermal Power Plants....Pages 271-277 Effect of Heattreatment on the Microstructure and Properties of Cold-worked Inconel 740H Boiler Tubes....Pages 279-285 Development and Application of TMCP Steel Plate in Coal Mining Machinery....Pages 287-298 Study on Dynamic Strain Aging and Low-Cycle Fatigue of Stainless Steel in Ultra-Supercritical Unit....Pages 299-306 Microstructure Changing of P91 Heat Resistant Steel during Short-Term Creep at 873K....Pages 307-313 Effect of Solution Temperature on the Microstructure and Mechanical Properties of Nickel Based Alloy CN 617....Pages 315-320 Effects of Mo Content on Microstructure and Mechanical Property of PH13-8Mo Martensitic Precipitation-Hardened Stainless Steel....Pages 321-326 Stress Corrosion Behavior of 12Cr Martensite Steel for Steam Turbine LP Blade....Pages 327-332 Creep Behavior and Microstructure Evolution of P92 Steel During Creep Test at 873 K....Pages 333-342 Study of Cleanliness of High Nitrogen Steel in ESR....Pages 343-349 Effects of Packed Structure and Operation Conditions on Liquid Flow Behavior in Blast Furnace Hearth....Pages 351-356 Front Matter....Pages 101-101 Hot Deformation Behavior of NF709 Austenitic Heat-Resistant Steel....Pages 357-363 Material Challenges for Long Term and Safe Operation of Coal Gasification Systems....Pages 365-372 Effect of Surface Condition on the Oxidation Behavior of HK40 Alloy under Low Oxygen Partial Pressure....Pages 373-378 Front Matter....Pages 379-379 Influence of Wall Thickness on Microstructure of the Directionally Solidified Turbine Vane with High Withdrawal Rate....Pages 381-386 Influence of Cu and Zn Residues from Wire Electro-Discharge Machining on TBC Durability....Pages 387-392 Experience in Manufacture and Behaviours of High Chromium Forged Rotor Steels....Pages 393-404 Damage Analysis of a Retired Gas Turbine Disc....Pages 405-410 Computer Aided Design of Ni-Based Single Crystal Superalloy for Industrial Gas Turbine Blades....Pages 411-416 Effects of Al on Coherent γ′, Lattice Misfit of γ′/γ and Stress-Rupture Property of Nimonic 80A....Pages 417-423 The Application of 9% Cr Casting Steel with Co and B Addition for 620°C Steam Turbine....Pages 425-430 Front Matter....Pages 431-431 Advanced Steels for Accident Tolerant Fuel Cladding in Current Light Water Reactors....Pages 433-442 Development of Mono-bloc Forging for CAP1400 Reactor Pressure Vessel....Pages 443-450 Separation of Zirconium and Hafnium: A Review....Pages 451-457 Research on M23C6 precipitation of 690 alloy....Pages 459-465 Preliminary Investigation on Brazing Performance of OFHC Tube Butt-Joints....Pages 467-471 Hot deformation constitutive equation and processing map of Alloy 690....Pages 473-480 Thermal Aging Performance of Domestic Cast Austenitic Stainless Steels in Nuclear Power Plants....Pages 481-486 Analysis of Heat Treatment for Martensitic Stainless Steel Used in CRDM....Pages 487-492 Study on Material Selection of Reactor Pressure Vessel of SCWR....Pages 493-499 Study on LBB Behavior of Nuclear Primary Pipes After Long-Term Thermal Aging....Pages 501-508 Front Matter....Pages 431-431 The Anatomy of AP1000 Mono-Block Low Pressure Rotor Forging....Pages 509-513 Research on the Domestic Materials of Forging Z12CN13 Stainless Steel for Hold-Down Spring of Reactor....Pages 515-521 Development of Profile Forging for Channel Head of Ap/Acp Steam Generator....Pages 523-531 Study About Ceiling Design for Main Control Room of NPP with HFE....Pages 533-538 Radiography Inspection Technology of CPR1000 Nuclear Power Unit Pressurizer....Pages 539-544 Study of girth weld selection principles and solution of inaccessible girth weld for high wear factor pipe in pre-service inspection....Pages 545-550 Effect of Heat Treatment on the Microstructure and Properties of 9Cr2WVTa Reduced Activation Steels....Pages 551-556 Determination of Intergranular Corrosion Susceptibility of Z3CN20.09M Cast Duplex Stainless Steel by a Modified Double Loop Electrochemical Potentiokinetic Reactivation Method....Pages 557-562 Front Matter....Pages 563-563 Corrosion in the Oil and Gas Industry: An Increasing Challenge for Materials....Pages 565-574 Automatic Measurement of Centreline Segregation in Continuously Cast Line Pipe Steel Slabs....Pages 575-581 Latest Development and Application of Nb-Bearing High Strength Pipeline Steels....Pages 583-595 Study on the Toughness of X100 Pipeline Steel Heat Affected Zone....Pages 597-604 Development of Higher Ductility and Lower Strain Aging Sensitivity X90/X100 Pipeline Steel....Pages 605-611 Research and Development of Ultra-High Strength X100 Welded Pipe....Pages 613-621 Effect of Cooling Mode on Microstructure and Mechanical Properties of Pipeline Steel for Strain Based Design and Research on its Deformation Mechanism....Pages 623-628 Influence of Ni and Mn on Microstructure and Mechanical Properties of Coarse Grain Heat Affected Zone in Low Carbon Microalloyed Steel....Pages 629-637 Austenite Grain Size Control in Upstream Processing of Niobium Microalloyed Steels by Nano-Scale Precipitate Engineering of TiN-NbC Composite....Pages 639-650 The Effect of Tempering Process on Microstructural Characteristics and Mechanical Properties of Induction Bend Pipe....Pages 651-656 Weld Haz Properties in Modern High Strength Niobium Pipeline Steels....Pages 657-664 Optimum Design and Development of High Strength and Toughness Welding Wire for Pipeline Steel....Pages 665-672 Front Matter....Pages 563-563 Low-Carbon Metallurgical Concepts for Seamless Octg Pipe....Pages 673-678 Influence of Heat Treatments on Microstructure and Mechanical Properties of Oilfield used Alloy 925....Pages 679-685 Effects of Specimen Shape, Size and Initial Occupancy on the Thermal Desorption Spectrum of Hydrogen....Pages 687-692 High Temperature Properties Test and Research of 9Cr1Mo (P9) Seamless Pipe Used in Petrochemical Industry....Pages 693-701 Recent Developments of Advanced Austenitic and Duplex Stainless Steels for Oil and Gas Industry....Pages 703-709 Hydrogen Cracking in Gas Tungsten Arc Welding of an AISI Type 321 Stainless Steel....Pages 711-716 Development and Application of Alloy TDJ-028 Seamless Pipe for Sour Oil and Gas Wells....Pages 717-720 Effect of Hot-Bending Process on Microstructure and Mechanical Property of K65 Submerged ARC Welded Pipe....Pages 721-728 Micromechanical Behaviors of Multi-Phase High Performance Steels....Pages 729-736 Influence of Tempering Temperature on the Second Phase Precipitation and Properties of X60 Pipeline Steel....Pages 737-742 Research on Submarine Pipeline Steel with High Performance....Pages 743-750 Analysis of High Temperature Ductility of Pipeline Steel and Application to ASP® Production Line in Angang Steel Co. Ltd.....Pages 751-758 Characterization of Anisotropic Behavior for High Grade Pipes....Pages 759-765 Application of Advanced Materials in Petroleum Engineering....Pages 767-773 Evaluation of Environmentally Assisted Cracking of Armour Wires in Flexible Pipes, Power Cables and Umbilicals....Pages 775-780 The Analysis of Force on PDC Cutter....Pages 781-787 Influence of Chloride Ion and Temperature on the Corrosion Behavior of Ni-Fe-Cr Alloy 028....Pages 789-794 Front Matter....Pages 795-795 Applications of Steel Plates for Pressure Vessels in Gb150.2....Pages 797-804 Niobium Application, Metallurgy and Global Trends in Pressure Vessel Steels....Pages 805-813 Optimised use of High Strength Steels for Pressure Vessels by Application of Modern Design Methods According to European Standards....Pages 815-820 Front Matter....Pages 795-795 Evaluation of Stress Corrosion Resistance Properties of 15CrMoR(H) in H2S Environment....Pages 821-829 Development of High Performance Cr-Mo Steel Plate for Hydrogen Service in Wugang....Pages 831-838 Effect of Tempering Temperature on the Low Temperature Toughness of the Cr-Mo Alloyed Pressure Vessel Steels....Pages 839-844 Research and Development of Nb-Bearing Steel Plates for Pressure Vessels in China....Pages 845-854 Research on the Low Temperature Pressure Vessel Steel of Nisco....Pages 855-862 Development of High Heat Input Welding High Strength Steel Plate for Oil Storage Tank in Xinyu Steel Company....Pages 863-869 Current Situation and Development Trend of Stainless Steel Material Applied in Pressure Vessel....Pages 871-879 Development of 12Cr2Mo1VR (H) Steel Plate for Equipment under Hydrogen Atmosphere....Pages 881-885 Microstructure and Impact Toughness of the Intercritically Reheated Coarse-grained Heat Affected Zone of 13MnNiMoR Steel....Pages 887-894 Effect of Niobium on the Static Recrystallization of 5Ni Cryogenic Steel....Pages 895-901 The Development of Ni-Containing Cryogenic Steels and Their Industrial Manufacturing....Pages 903-909 Development of −50°C High-Strength and High-Toughness Nb-Bearing Steel for Large Sphere Tank....Pages 911-915 Front Matter....Pages 917-917 Fuel for Life: Aluminum Energy Technologies for Electricity Generation by Hydrogen....Pages 919-924 Back Matter....Pages 925-932 The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents. For more information on TMS, visit www.tms.org.