Design and Modeling of Mechanical Systems: Proceedings of the Fifth International Conference Design and Modeling of Mechanical Systems, CMSM 2013´2013, Djerba, Tunisia, March 25-27 2013

The 5 th International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of the congress (CMSM ́2013), organized by the Unit of Mechanics, Modeling and Manufacturing (U2MP) of the National School of Engineers of Sfax, Tunisia, the Mechanical Engineering Laboratory (MBL) of the National School of Engineers of Monastir, Tunisia and the Mechanics Laboratory of Sousse (LMS) of the National School of Engineers of Sousse, Tunisia, saw a significant increase of the international participation. This edition brought together nearly 300 attendees who exposed their work on the following topics: mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings of CMSM ́2013 and contains a careful selection of high quality contributions, which were exposed during various sessions of the congress. The original articles presented here provide an overview of recent research advancements accomplished in the field mechanical engineering. Front Matter....Pages 1-12 Front Matter....Pages 1-1 Optimization of the Combustion in Large Marine Diesel Engine by Controlling the Exhaust Gas....Pages 3-10 Dynamic in Path Planning of a Cable Driven Robot....Pages 11-18 Integrating Radial Basis Functions with Modelica for Mechatronic Design....Pages 19-25 Biomechanical Model of the Knee to Estimate the Musculotendinous Forces during an Isometric Extension....Pages 27-35 Development of Co-simulation Environment with ADAMS/Simulink to Study Maneuvers of a Scooter....Pages 37-43 Kinematics, Workspace and Singularities Analysis of the 3-UPU Wrist Manipulator....Pages 45-52 On the Kinematics of Spherical Parallel Manipulators for Real Time Applications....Pages 53-60 Towards the Integration of Safety Analysis in a Model-Based System Engineering Approach with SysML....Pages 61-68 Modeling and Simulation of Micro EDM Process....Pages 69-77 Front Matter....Pages 79-79 Integration of Drill Torsional-Axial Coupling in a Global Spindle-Self Vibratory Drilling Head Model....Pages 81-88 A Discrete Model for Transverse Vibration of a Cantilever Beam Carrying Multi Lumped Masses: Analogy with the Continuous Model....Pages 89-96 Numerical Continuation of Equilibrium Point and Limit Cycles of a Rigid Rotor Supported by Floating Ring Bearings....Pages 97-103 Prediction Life of Horizontal Rotors by Natural Frequency Evolution....Pages 105-110 Defect Detection through Stochastic Wave Finite Element Method....Pages 111-118 Reduction Method Applied to Viscoelastically Damped Finite Element Models....Pages 119-126 Coupled Finite Element-Boundary Element Formulation for Noise and Vibration Attenuation Using Shunt Piezoelectric Materials....Pages 127-134 A TMD Parameters Optimization with Uncertain Bounded Structural Parameters....Pages 135-142 Influence of Temperature and Rotational Speed on the Properties of Magnetorheological Brake....Pages 143-149 Fault Detection of Nonlinear Systems Using Multi-model Structure: Application to a Ship Propulsion System....Pages 151-158 Nonlinear Forced Vibrations of Rotating Composite Beams with Internal Combination Resonance....Pages 159-166 Front Matter....Pages 79-79 Behavior of Single-Lap Bolted Joint Subjected to Dynamic Transverse Load....Pages 167-174 Numerical Stress and Fatigue Behavior of a Helicopter Blade by Modal Analysis....Pages 175-180 Detection of Gear Tooth Pitting Based on Transmission Error Measurements....Pages 181-188 Multi-objective Optimization of Gear Tooth Profile Modifications....Pages 189-197 An Experimental Investigation of the Dynamic Behavior of Planetary Gear Set....Pages 199-206 Identification of the Unconstrained Modes of 3D Axisymmetric Structures from Measurements under Constraining Support Conditions....Pages 207-215 Dynamic Modeling of Rail Vehicle Traveling at High Speed....Pages 217-224 Early Detection of Mechanical Defects by Neural Networks “Spectral Analysis”....Pages 225-234 Front Matter....Pages 235-235 PIV Study of the Down-Pitched Blade Turbine Hydrodynamic Structure....Pages 237-244 Modeling and Analysis of the Hydrodynamic Structure around a Vertical Axis Water Turbine....Pages 245-252 Numerical Coupled Modeling of Water Hammer in Quasi-rigid Thin Pipes....Pages 253-264 Energetic Analyses of a NH 3 -NaSCN Absorption Machine Operating at Three Pressure Levels....Pages 265-272 Numerical Study of Anti-ram of Hydraulic Lines by an Additional Viscoelastic Pipe....Pages 273-280 Study of Erosion Phenomenon in the CFM56-7B Turbojet....Pages 281-287 FEA of In-Plane Shear Stresses of a Preloaded Sandwich Plate with a Viscoelastic Core: Application to the Disk Brake System....Pages 289-296 Numerical Characterization of the Mechanical Properties of a Composite Material with Metal....Pages 297-305 Structural Health Monitoring by Acoustic Emission of Smart Composite Laminates Embedded with Piezoelectric Sensor....Pages 307-314 Vibroacoustic Analysis of Boat Propeller Using Reliability Techniques....Pages 315-322 Pressure Waves in Homogeneous Gas-Liquid Mixture Flows in Deformable Pipelines....Pages 323-330 Intake Manifold Shape Influence on the Unsteady In-Cylinder Flow: Application on LPG Bi-fuel Engine....Pages 331-338 Front Matter....Pages 235-235 Development of an Analytical and Numerical Tools for Launcher/Satellite Vibro-acoustic Prediction....Pages 339-345 Multi-leaks Detection and Sizing in Viscoelastic Pipeline System....Pages 347-354 Mechanical Behaviour and Damage Evaluation by Acoustic Emission of Sandwich Structure....Pages 355-363 CFD Modeling of the High Efficiency Rotor Separator in Cement Grinding Circuit....Pages 365-372 Waterhammer in Flexible Pipes....Pages 373-380 Numerical Analysis of Fluid Flow and Heat Transfer within Grooved Flat Mini Heat Pipes....Pages 381-394 Front Matter....Pages 395-395 Micropolar Models of Architectured Materials from Discrete Homogenization: Case of Textile Monolayers....Pages 397-404 Inspection Time Optimization for a Cracked Component Based on a Reliability Approach....Pages 405-413 Fatigue Behavior of Aluminum Alloys Requested by a Simple Overload: Environment Influence....Pages 415-421 Optimization Based Simulation of Self-expanding Nitinol Stent....Pages 423-430 Anisotropic Damage Model with Unilateral Effect and Sliding Friction for Brittle Materials....Pages 431-438 Creep Effect on the J-Integral around a Crack Tip in a Cracked Nonlinear Viscoelastic Plate of PVC....Pages 439-446 Worn Surface Characteristics of a Friction Material during Braking Simulation Test....Pages 447-452 Multi-scale Anisotropic Approach for Modeling Woven Fabric Composite....Pages 453-460 Optimization of Single Point Incremental Forming of Sheet Metal with Isotropic and Combined Hardening Behavior....Pages 461-468 Ply Orientations Effect in the Fracture Toughness of Mixed Mode Delamination in E-Glass/Polyester Woven Fabrics....Pages 469-476 Experimental Implementation of the Multipoint Hydroforming Process....Pages 477-484 Surface Integrity after Orthogonal Cutting of Aeronautical Aluminum Alloy 7075-T651....Pages 485-492 Buckling of Laminated Composite Shells of Pipe Cracks....Pages 493-501 Effect of Cooling on Mechanical Properties and Residual Stresses in Aluminium AA2017 Friction Stir Welds....Pages 503-507 Front Matter....Pages 395-395 Experimental and Numerical Study of Polypropylene Composite Reinforced with Jute Fibers....Pages 509-516 Trip Effect on the Modeling of Thermo-mechanical Behaviour of Steels during Quenching Process....Pages 517-522 Experimental Parameters Identification of Fatigue Damage Model for Short Glass Fiber Reinforced Thermoplastics GFRP....Pages 523-530 Elasticity and Viscoelasticity of Open Cellular Material: Micromechanical Approach....Pages 531-540 Characterization of the Friction Coefficient and White Layer at the Tool-Chip-Workpiece Interface Using Experimental and Numerical Studies during Friction Tests of AISI 1045....Pages 541-548 Higher Order Shear Deformation Enhanced Solid Shell Element....Pages 549-555 Multi-scale Modelling of Orthotropic Properties of Trabecular Bone in Nanoscale....Pages 557-566 The Use of the DIC Method to Involve the Strain Instability Occurred in an Undergoing High Shear during the ECAE Process....Pages 567-574 Front Matter....Pages 575-575 Disassembly Method for Early Stages of Design....Pages 577-585 FEM Simulation Based on CAD Model Simplification: A Comparison Study between the Hybrid Method and the Technique Using a Removing Details....Pages 587-596 Tolerancing Analysis by Operations on Polytopes....Pages 597-604 The Cylinder of the Autoclave Charged with the Internal Pressure, Strengthen with a Strip Wound onto It, with Programmable Tension Realized by a Magnethoreological Structure....Pages 605-611 Application of the CSP Approach and the Interval Computation for the Optimal Sizing of a Compression Spring....Pages 613-625 Assembly Line Resource Assignment and Balancing Problem of Type 2....Pages 627-634 A Multi-objective Optimization for Multi-period Planning in Multi-item Cooperative Manufacturing Supply Chain....Pages 635-643 A Feature-Based Methodology for Eco-designing Parts on Detail Phase....Pages 645-654 Mates Updating of Rigid and Fully Constrained Assembly with Defects....Pages 655-662 Back Matter....Pages 663-665 The 5th International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of the congress (CMSM ́2013), organized by the Unit of Mechanics, Modeling and Manufacturing (U2MP) of the National School of Engineers of Sfax, Tunisia, the Mechanical Engineering Laboratory (MBL) of the National School of Engineers of Monastir, Tunisia and the Mechanics Laboratory of Sousse (LMS) of the National School of Engineers of Sousse, Tunisia, saw a significant increase of the international participation. This edition brought together nearly 300 attendees who exposed their work on the following topics: mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings of CMSM ́2013 and contains a careful selection of high quality contributions which were exposed during various sessions of the congress. The original articles presented here provides an overview of recent research advancements accomplished in the field mechanical engineering. The 5th International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of the congress (CMSḾ2013), organized by the Unit of Mechanics, Modeling and Manufacturing (U2MP) of the National School of Engineers of Sfax, Tunisia, the Mechanical Engineering Laboratory (MBL) of the National School of Engineers of Monastir, Tunisia and the Mechanics Laboratory of Sousse (LMS) of the National School of Engineers of Sousse, Tunisia, saw a significant increase of the international participation. This edition brought together nearly 300 attendees who exposed their work on the following topics: mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings of CMSḾ2013 and contains a careful selection of high quality contributions which were exposed during various sessions of the congress. The original articles presented here provides an overview of recent research advancements accomplished in the field mechanical engineering