Biopolymers and Biotech Admixtures for Eco-Efficient Construction Materials (Woodhead Publishing Series in Civil and Structural Engineering)

Since 1930 more than 100,000 new chemical compounds have been developed and insufficient information exists on the health assessment of 95 percent of these chemicals in which a relevant percentage are used in construction products. For instance Portland cement concrete, the most used material on the Planet (10.000 million tons/year that in the next 40 years will increase around 100 %) currently used in around 15% of total concrete production contains chemicals used to modify their properties, either in the fresh or hardened state. Biopolymers are materials that are developed from natural resources. They reduce dependence on fossil fuels and reduce carbon dioxide emissions. There is a worldwide demand to replace petroleum-based materials with renewable resources. Currently bio-admixtures represent just a small fraction of the chemical admixtures market (around 20%) but with environmental awareness for constituents in construction materials generally growing (the Construction Products Regulation is being enforced in Europe since 2013), the trend towards bio-admixtures is expected to continue. This book provides an updated state-of-the-art review on biopolymers and their influence and use as admixtures in the development of eco-efficient construction materials. * Provides essential knowledge for researchers and producers working on the development of biopolymer-modified construction materials * Discusses the various types of biopolymers currently available, their different production techniques, their use as bio-admixtures in concretes and mortars and applications in other areas of civil engineering such as soil stability, wood preservation, adhesives and coatings * All contributions are made from leading researchers, who have intensive involvement in the design and use of biopolymers in construction materials The response of concrete under tensile loading is crucial for most applications because concrete is much weaker in tension than in compression. Understanding the response mechanisms of concrete under tensile conditions is therefore key to understanding and using concrete in structural applications. Understanding the tensile properties of concrete summarises key recent research in this important subject.

After an introduction to concrete, the book is divided into two parts: part one on static response and part two on dynamic response. Part one starts with a summary chapter on the most important parameters that affect the tensile response of concrete. Chapters show how multi scale modelling is used to relate concrete composition to tensile properties. Part two focuses on dynamic response and starts with an introduction to the different regimes of dynamic loading, ranging from the low frequency loading by wind or earthquakes up to the extreme dynamic conditions due to explosions and ballistic impacts. Following chapters review dynamic testing techniques and devices that deal with the various regimes of dynamic loading. Later chapters highlight the dynamic behaviour of concrete from different viewpoints, and the book ends with a chapter on practical examples of how detailed knowledge on tensile properties is used by engineers in structural applications.

Drawing on the work of some of the leading experts in the field, Understanding the tensile properties of concrete is a valuable reference for civil and structural engineers as well as those researching this important material.

• Summarises key recent research in the areas of understanding the response mechanisms of concrete under tensile conditions
• Provides a summary of the most important parameters that affect the tensile response of concrete and shows how multi scale modeling is used to relate concrete composition to tensile properties
• Highlights the dynamic behaviour of concrete from different viewpoints and provides practical examples of how detailed knowledge on tensile properties is used by engineers in structural applications

The response of concrete under tensile loading is crucial for most applications because concrete is much weaker in tension than in compression. Understanding the response mechanisms of concrete under tensile conditions is therefore key to understanding and using concrete in structural applications. Understanding the tensile properties of concrete summarises key recent research in this important subject. After an introduction to concrete, the book is divided into two parts: part one on static response and part two on dynamic response. Part one starts with a summary chapter on the most important parameters that affect the tensile response of concrete. Chapters show how multi scale modelling is used to relate concrete composition to tensile properties. Part two focuses on dynamic response and starts with an introduction to the different regimes of dynamic loading, ranging from the low frequency loading by wind or earthquakes up to the extreme dynamic conditions due to explosions and ballistic impacts. Following chapters review dynamic testing techniques and devices that deal with the various regimes of dynamic loading. Later chapters highlight the dynamic behaviour of concrete from different viewpoints, and the book ends with a chapter on practical examples of how detailed knowledge on tensile properties is used by engineers in structural applications. Drawing on the work of some of the leading experts in the field, Understanding the tensile properties of concrete is a valuable reference for civil and structural engineers as well as those researching this important material. Summarises key recent research in the areas of understanding the response mechanisms of concrete under tensile conditionsProvides a summary of the most important parameters that affect the tensile response of concrete and shows how multi scale modeling is used to relate concrete composition to tensile propertiesHighlights the dynamic behaviour of concrete from different viewpoints and provides practical examples of how detailed knowledge on tensile properties is used by engineers in structural applications

Masonry walls constitute the interface between the building’s interior and the outdoor environment. Masonry walls are traditionally composed of fired-clay bricks (solid or perforated) or blocks (concrete or earth-based), but in the past (and even in the present) they were often associated as needing an extra special thermal and acoustical insulation layer. However, over more recent years investigations on thermal and acoustical features has led to the development of new improved bricks and blocks that no longer need these insulation layers. Traditional masonry units (fired-clay bricks, concrete or earth-based blocks) that don’t offer improved performance in terms of thermal and acoustical insulation are a symbol of a low-technology past, that are far removed from the demands of sustainable construction.

This book provides an up-to-date state-of-the-art review on the eco-efficiency of masonry units, particular emphasis is placed on the design, properties, performance, durability and LCA of these materials. Since masonry units are also an excellent way to reuse bulk industrial waste the book will be important in the context of the Revised Waste Framework Directive 2008/98/EC which states that the minimum reuse and recycling targets for construction and demolition waste (CDW) should be at least 70% by 2020. On the 9th of March 2011 the European Union approved the Regulation (EU) 305/2011, known as the Construction Products Regulation (CPR) and it will be enforced after the 1st of July 2013. The future commercialization of construction materials in Europe makes their environmental assessment mandatory meaning that more information related to the environmental performance of building materials is much needed.

• Provides an authoritative guide to the eco-efficiency of masonry units
• Examines the reuse of waste materials
• Covers a range of materials including, clay, cement, earth and pumice

The development of NDT (non-destructive testing) techniques used for the inspection of concrete structures is currently in high demand, because many existing structures have become aged and deteriorated in service. In order to formulate predictions on their stability and to estimate their safety, it is necessary to identify damage signals and to determine their causes. In this regard, the development and establishment of innovative and highly advanced non-destructive methods are required. Acoustic Emission (AE) and related NDE (non-destructive evaluation) techniques have been extensively used to determine crack detection and damage evaluation in concrete.

With the move towards a more sustainable society, and the need to extend the long-term service life of infrastructure and aging and disastrous damage due to recent earthquakes, Acoustic Emission (AE) and Related Non-destructive Evaluation (NDE) Techniques in the Fracture Mechanics of Concrete: Fundamentals and Applications is a critical reference source for civil engineers, contractors working in construction and materials scientists working both in industry and academia.

• Presents innovative Acoustic Emission (AE) and related non-destructive evaluation (NDE) techniques, used for damage detection and inspection of aged and deteriorated concrete structures
• Contributions from recognized world-leaders in the application of acoustic emission (AE) and NDE techniques used for the damage assessment of concrete and concrete structures
• With the move towards a more sustainable society, and the need to extend the long-term service life of infrastructure and damage due to recent earthquakes, this book is of critical importance
• An essential knowledge resource for civil engineers, contractors working in construction and materials scientists working both in industry and academia

Masonry walls constitute the interface between the building's interior and the outdoor environment. Masonry walls are traditionally composed of fired-clay bricks (solid or perforated) or blocks (concrete or earth-based), but in the past (and even in the present) they were often associated as needing an extra special thermal and acoustical insulation layer. However, over more recent years investigations on thermal and acoustical features has led to the development of new improved bricks and blocks that no longer need these insulation layers. Traditional masonry units (fired-clay bricks, concrete or earth-based blocks) that don't offer improved performance in terms of thermal and acoustical insulation are a symbol of a low-technology past, that are far removed from the demands of sustainable construction. This book provides an up-to-date state-of-the-art review on the eco-efficiency of masonry units, particular emphasis is placed on the design, properties, performance, durability and LCA of these materials. Since masonry units are also an excellent way to reuse bulk industrial waste the book will be important in the context of the Revised Waste Framework Directive 2008/98/EC which states that the minimum reuse and recycling targets for construction and demolition waste (CDW) should be at least 70% by 2020. On the 9th of March 2011 the European Union approved the Regulation (EU) 305/2011, known as the Construction Products Regulation (CPR) and it will be enforced after the 1st of July 2013. The future commercialization of construction materials in Europe makes their environmental assessment mandatory meaning that more information related to the environmental performance of building materials is much needed. Provides an authoritative guide to the eco-efficiency of masonry units Examines the reuse of waste materials Covers a range of materials including, clay, cement, earth and pumice

Since 1930 more than 100,000 new chemical compounds have been developed and insufficient information exists on the health assessment of 95 percent of these chemicals in which a relevant percentage are used in construction products. For instance Portland cement concrete, the most used material on the Planet (10.000 million tons/year that in the next 40 years will increase around 100 %) currently used in around 15% of total concrete production contains chemicals used to modify their properties, either in the fresh or hardened state.

Biopolymers are materials that are developed from natural resources. They reduce dependence on fossil fuels and reduce carbon dioxide emissions. There is a worldwide demand to replace petroleum-based materials with renewable resources.

Currently bio-admixtures represent just a small fraction of the chemical admixtures market (around 20%) but with environmental awareness for constituents in construction materials generally growing (the Construction Products Regulation is being enforced in Europe since 2013), the trend towards bio-admixtures is expected to continue.

This book provides an updated state-of-the-art review on biopolymers and their influence and use as admixtures in the development of eco-efficient construction materials.

• Provides essential knowledge for researchers and producers working on the development of biopolymer-modified construction materials
• Discusses the various types of biopolymers currently available, their different production techniques, their use as bio-admixtures in concretes and mortars and applications in other areas of civil engineering such as soil stability, wood preservation, adhesives and coatings
• All contributions are made from leading researchers, who have intensive involvement in the design and use of biopolymers in construction materials

The development of NDT (non-destructive testing) techniques used for the inspection of concrete structures is currently in high demand, because many existing structures have become aged and deteriorated in service. In order to formulate predictions on their stability and to estimate their safety, it is necessary to identify damage signals and to determine their causes. In this regard, the development and establishment of innovative and highly advanced non-destructive methods are required. Acoustic Emission (AE) and related NDE (non-destructive evaluation) techniques have been extensively used to determine crack detection and damage evaluation in concrete. With the move towards a more sustainable society, and the need to extend the long-term service life of infrastructure and aging and disastrous damage due to recent earthquakes, Acoustic Emission (AE) and Related Non-destructive Evaluation (NDE) Techniques in the Fracture Mechanics of Concrete: Fundamentals and Applications is a critical reference source for civil engineers, contractors working in construction and materials scientists working both in industry and academia. Presents innovative Acoustic Emission (AE) and related non-destructive evaluation (NDE) techniques, used for damage detection and inspection of aged and deteriorated concrete structures Contributions from recognized world-leaders in the application of acoustic emission (AE) and NDE techniques used for the damage assessment of concrete and concrete structures With the move towards a more sustainable society, and the need to extend the long-term service life of infrastructure and damage due to recent earthquakes, this book is of critical importance An essential knowledge resource for civil engineers, contractors working in construction and materials scientists working both in industry and academia This book provides an updated state-of-the-art review on new developments in alkali-activation. The main binder of concrete, Portland cement, represents almost 80% of the total CO2 emissions of concrete which are about 6 to 7% of the Planet’s total CO2 emissions. This is particularly serious in the current context of climate change and it could get even worse because the demand for Portland cement is expected to increase by almost 200% by 2050 from 2010 levels, reaching 6000 million tons/year. Alkali-activated binders represent an alternative to Portland cement having higher durability and a lower CO2 footprint.

• Reviews the chemistry, mix design, manufacture and properties of alkali-activated cement-based concrete binders
• Considers performance in adverse environmental conditions.
• Offers equal emphasis on the science behind the technology and its use in civil engineering.

This book provides an updated state-of-the-art review on new developments in alkali-activation. The main binder of concrete, Portland cement, represents almost 80% of the total CO2 emissions of concrete which are about 6 to 7% of the Planet's total CO2 emissions. This is particularly serious in the current context of climate change and it could get even worse because the demand for Portland cement is expected to increase by almost 200% by 2050 from 2010 levels, reaching 6000 million tons/year. Alkali-activated binders represent an alternative to Portland cement having higher durability and a lower CO2 footprint. Reviews the chemistry, mix design, manufacture and properties of alkali-activated cement-based concrete binders Considers performance in adverse environmental conditions. Offers equal emphasis on the science behind the technology and its use in civil engineering. This book looks in depth at the properties and behaviour of concrete under tension, a phenomenon that can cause catastrophic failure of concrete structures if it is not properly factored into the design stage. Tension is the opposite force to compression. Most concrete structures are under static, compressive loads, but increasingly, tension is acting on concrete structures due to changes in design and construction using concrete. Large single span concrete bridges, for example, are under a significant tensile load due to the weight of vehicles. The tensile strength of concrete is improved through the use of reinforcements (such as steel rebar) which possess good tensile properties