Advances in Production Management Systems. Towards Smart and Digital Manufacturing : IFIP WG 5.7 International Conference, APMS 2020, Novi Sad, Serbia, August 30 {u2013} September 3, 2020, Proceedings, Part II

The two-volume set IFIP AICT 591 and 592 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2020, held in Novi Sad, Serbia, in August/September 2020. The 164 papers presented were carefully reviewed and selected from 199 submissions. They discuss globally pressing issues in smart manufacturing, operations management, supply chain management, and Industry 4.0. The papers are organized in the following topical sections: Part I: advanced modelling, simulation and data analytics in production and supply networks; advanced, digital and smart manufacturing; digital and virtual quality management systems; cloud-manufacturing; cyber-physical production systems and digital twins; IIOT interoperability; supply chain planning and optimization; digital and smart supply chain management; intelligent logistics networks management; artificial intelligence and blockchain technologies in logistics and DSN; novel production planning and control approaches; machine learning and artificial intelligence; connected, smart factories of the future; manufacturing systems engineering: agile, flexible, reconfigurable; digital assistance systems: augmented reality and virtual reality; circular products design and engineering; circular, green, sustainable manufacturing; environmental and social lifecycle assessments; socio-cultural aspects in production systems; data-driven manufacturing and services operations management; product-service systems in DSN; and collaborative design and engineering Part II: the Operator 4.0: new physical and cognitive evolutionary paths; digital transformation approaches in production management; digital transformation for more sustainable supply chains; data-driven applications in smart manufacturing and logistics systems; data-driven services: characteristics, trends and applications; the future of lean thinking and practice; digital lean manufacturing and its emerging practices; new reconfigurable, flexible or agile production systems in the era of industry 4.0; operations management in engineer-to-order manufacturing; production management in food supply chains; gastronomic service system design; product and asset life cycle management in the circular economy; and production ramp-up strategies for product Front Matter ....Pages i-xxxi Front Matter ....Pages 1-1 Facilitating Operator Participation in Continuous Improvement: An Investigation of Organizational Factors (Eirin Lodgaard, Silje Helene Aschehoug, Daryl Powell)....Pages 3-10 Improving the Safety of Using Didactic Setups by Applying Augmented Reality (Srdjan Tegeltija, Vule Reljić, Ivana àenk, Laslo Tarjan, Branislav Tejić)....Pages 11-18 Production Management as-a-Service: A Softbot Approach (Brunno Abner, Ricardo J. Rabelo, Saulo P. Zambiasi, David Romero)....Pages 19-30 Knowledge Strategies for Organization 4.0 – A Workforce Centric Approach (Magnus Bjerkne Gerdin, Åsa Fast-Berglund, Dan Li, Adam Palmquist)....Pages 31-36 Challenges for the Operator 3.0 Addressed Through the Enabling Technologies of the Operator 4.0 (Malin Tarrar, Peter Thorvald, Åsa Fast-Berglund, David Romero)....Pages 37-45 Agent- and Skill-Based Process Interoperability for Socio-Technical Production Systems-of-Systems (Åsa Fast-Berglund, David Romero, Magnus Åkerman, Björn Hodig, Andreas Pichler)....Pages 46-54 Front Matter ....Pages 55-55 Challenges in Data Life Cycle Management for Sustainable Cyber-Physical Production Systems (Mélanie Despeisse, Ebru Turanoglu Bekar)....Pages 57-65 Explainable AI in Manufacturing: A Predictive Maintenance Case Study (Bahrudin Hrnjica, Selver Softic)....Pages 66-73 Retrofit Concept for Textile Production (Felix Franke, Susanne Franke, Ralph Riedel)....Pages 74-82 Organizational Enablers for Digitalization in Norwegian Industry (Lars Harald Lied, Maria Flavia Mogos, Daryl John Powell)....Pages 83-90 Concept of PLM Application Integration with VR and AR Techniques (Jan Duda, Sylwester Oleszek)....Pages 91-99 The Big Potential of Big Data in Manufacturing: Evidence from Emerging Economies (Marko Pavlović, Uglješa Marjanović, Slavko Rakić, Nemanja Tasić, Bojan Lalić)....Pages 100-107 A Conceptual Model for Deploying Digitalization in SMEs Through Capability Building (Zuhara Chavez, Jannicke Baalsrud Hauge, Monica Bellgran)....Pages 108-116 The Potential of Game Development Platforms for Digital Twins and Virtual Labs (Ali Abdallah, Matthias Primas, Ioan Turcin, Udo Traussnigg)....Pages 117-121 The Application of ICT Solutions in Manufacturing Companies in Serbia (Danijela Ciric, Teodora Lolic, Danijela Gracanin, Darko Stefanovic, Bojan Lalic)....Pages 122-129 Achieving Business Model Innovation with the Personalized Product Business Model Radar Template (Egon Lüftenegger)....Pages 130-137 Integrating Electronic Components into 3D Printed Parts to Develop a Digital Manufacturing Approach (Ioan Turcin, Ali Abdallah, Manfred Pauritsch, Cosmin Cosma, Nicolae Balc)....Pages 138-145 Digital Transformation and Its Potential Effects on Future Management: Insights from an ETO Context (Antoni Vike Danielsen)....Pages 146-153 Applying Contextualization for Data-Driven Transformation in Manufacturing (Sonika Gogineni, Kai Lindow, Jonas Nickel, Rainer Stark)....Pages 154-161 Front Matter ....Pages 163-163 Smart Contract-Based Blockchain Solution to Reduce Supply Chain Risks (Fabian Dietrich, Ali Turgut, Daniel Palm, Louis Louw)....Pages 165-173 Towards Sustainability: The Manufacturers’ Perspective (Olena Klymenko, Lise Lillebrygfjeld Halse, Bjørn Jæger)....Pages 174-181 Front Matter ....Pages 183-183 Smart Factory Competitiveness Based on Real Time Monitoring and Quality Predictive Model Applied to Multi-stages Production Lines (Nicola Gramegna, Fabrizio Greggio, Franco Bonollo)....Pages 185-196 A New Application of Coordination Contracts for Supplier Selection in a Cloud Environment (Reza Tavakkoli-Moghaddam, Mohammad Alipour-Vaezi, Zahra Mohammad-Nazari)....Pages 197-205 Workforce Assignment with a Different Skill Level for Automotive Parts Assembly Lines (Hyungjoon Yang, Je-Hun Lee, Hyun-Jung Kim)....Pages 206-212 A Framework of Data-Driven Dynamic Optimisation for Smart Production Logistics (Sichao Liu, Lihui Wang, Xi Vincent Wang, Magnus Wiktorsson)....Pages 213-221 Decentralized Industrial IoT Data Management Based on Blockchain and IPFS (Xiaochen Zheng, Jinzhi Lu, Shengjing Sun, Dimitris Kiritsis)....Pages 222-229 Integrated Platform and Digital Twin Application for Global Automotive Part Suppliers (Jinho Yang, Sangho Lee, Yong-Shin Kang, Sang Do Noh, Sung Soo Choi, Bo Ra Jung et al.)....Pages 230-237 Analyzing the Characteristics of Digital Twin and Discrete Event Simulation in Cyber Physical Systems (Erik Flores-García, Goo-Young Kim, Jinho Yang, Magnus Wiktorsson, Sang Do Noh)....Pages 238-244 Streaming Analytics in Edge-Cloud Environment for Logistics Processes (Moritz von Stietencron, Marco Lewandowski, Katerina Lepenioti, Alexandros Bousdekis, Karl Hribernik, Dimitris Apostolou et al.)....Pages 245-253 An Improvement in Master Surgical Scheduling Using Artificial Neural Network and Fuzzy Programming Approach (Ahmad Ghasemkhani, Reza Tavakkoli-Moghaddam, Mahdi Hamid, Mehdi Mahmoodjanloo)....Pages 254-262 SKOS Tool: A Tool for Creating Knowledge Graphs to Support Semantic Text Classification (Farhad Ameri, Reid Yoder, Kimia Zandbiglari)....Pages 263-271 Front Matter ....Pages 273-273 The Successful Commercialization of a Digital Twin in an Industrial Product Service System (Oliver Stoll, Shaun West, Paolo Gaiardelli, David Harrison, Fintan J. Corcoran)....Pages 275-282 Using Service Dominant Logic to Assess the Value Co-creation of Smart Services (Oliver Stoll, Shuan West, Cosimo Barbieri)....Pages 283-290 Engineering of Data-Driven Service Systems for Smart Living: Application and Challenges (Henrik Kortum, Laura Sophie Gravemeier, Novica Zarvic, Thomas Feld, Oliver Thomas)....Pages 291-298 The Role of Service Business Models in the Manufacturing of Transition Economies (Slavko Rakic, Nenad Simeunovic, Nenad Medic, Marko Pavlovic, Ugljesa Marjanovic)....Pages 299-306 System Architecture Analysis with Network Index in MBSE Approach -Application to Smart Interactive Service with Digital Health Modeling- (Toshiya Kaihara, Nobutada Fujii, Daisuke Kokuryo, Mizuki Harada)....Pages 307-313 The Data-Driven Product-Service Systems Design and Delivery (4DPSS) Methodology (Roberto Sala, Alessandro Bertoni, Fabiana Pirola, Giuditta Pezzotta)....Pages 314-321 Data-Driven Maintenance Delivery Framework: Test in an Italian Company (Roberto Sala, Fabiana Pirola, Giuditta Pezzotta)....Pages 322-329 Towards a Comparative Data Value Assessment Framework for Smart Product Service Systems (Lennard Holst, Volker Stich, Günther Schuh, Jana Frank)....Pages 330-337 Impact of Platform Openness on Ecosystems and Value Streams in Platform-Based PSS Exemplified Using RAMI 4.0 (Michela Zambetti, Till Blüher, Giuditta Pezzotta, Konrad Exner, Roberto Pinto, Rainer Stark)....Pages 338-346 Industry 4.0 Data-Related Technologies and Servitization: A Systematic Literature Review (Michela Zambetti, Roberto Pinto, Giuditta Pezzotta)....Pages 347-360 A Framework to Support Value Co-creation in PSS Development (Martha Orellano, Xavier Boucher, Gilles Neubert, Anne Coulon)....Pages 361-368 Front Matter ....Pages 369-369 Utilizing Lean Thinking as a Means to Digital Transformation in Service Organizations (F. P. Santhiapillai, R. M. Chandima Ratnayake)....Pages 371-378 On the Need of Functional Priority and Failure Risk Assessment to Optimize Human Resource Allocation in Public Service Organizations (F. P. Santhiapillai, R. M. Chandima Ratnayake)....Pages 379-386 Assessing the Value of Process Improvement Suggestions (Torbjørn H. Netland, Hajime Mizuyama, Rafael Lorenz)....Pages 387-395 On the Necessity for Identifying Waste in Knowledge Work Dominated Projects: A Case Study from Oil & Gas-Related Product Development Projects (F. P. Santhiapillai, R. M. Chandima Ratnayake)....Pages 396-405 Lean Thinking: From the Shop Floor to an Organizational Culture (Paulo Amaro, Anabela C. Alves, Rui M. Sousa)....Pages 406-414 Front Matter ....Pages 415-415 A Learning Roadmap for Digital Lean Manufacturing (Anja Bottinga Solheim, Daryl John Powell)....Pages 417-424 Investigating the Challenges and Opportunities for Production Planning and Control in Digital Lean Manufacturing (Daryl Powell, Eirin Lodgaard, Heidi Dreyer)....Pages 425-431 New Forms of Gemba Walks and Their Digital Tools in the Digital Lean Manufacturing World (David Romero, Paolo Gaiardelli, Thorsten Wuest, Daryl Powell, Matthias Thürer)....Pages 432-440 Front Matter ....Pages 441-441 A Computational Method for Identifying the Optimum Buffer Size in the Era of Zero Defect Manufacturing (Foivos Psarommatis, Ali Boujemaoui, Dimitris Kiritsis)....Pages 443-450 A Bi-objective Scheduling Model for Additive Manufacturing with Multiple Materials and Sequence-Dependent Setup Time (Reza Tavakkoli-Moghaddam, Shadi Shirazian, Behdin Vahedi-Nouri)....Pages 451-459 Dynamic Distributed Job-Shop Scheduling Problem Consisting of Reconfigurable Machine Tools (Mehdi Mahmoodjanloo, Reza Tavakkoli-Moghaddam, Armand Baboli, Ali Bozorgi-Amiri)....Pages 460-468 Towards a Non-disruptive System for Dynamic Orchestration of the Shop Floor (Milan Pisarić, Vladimir Dimitrieski, Marko Vještica, Goran Krajoski)....Pages 469-476 Assembly Process Design: Performance Evaluation Under Ergonomics Consideration Using Several Robot Collaboration Modes (Anthony Quenehen, Stephane Thiery, Nathalie Klement, Lionel Roucoules, Olivier Gibaru)....Pages 477-484 A Method of Distributed Production Management for Highly-Distributed Flexible Job Shops (Daiki Yasuda, Eiji Morinaga, Hidefumi Wakamatsu)....Pages 485-492 A Digital Twin Modular Framework for Reconfigurable Manufacturing Systems (Hichem Haddou Benderbal, Abdelkrim R. Yelles-Chaouche, Alexandre Dolgui)....Pages 493-500 Reconfigurable Digitalized and Servitized Production Systems: Requirements and Challenges (Magdalena Paul, Audrey Cerqueus, Daniel Schneider, Hichem Haddou Benderbal, Xavier Boucher, Damien Lamy et al.)....Pages 501-508 The Impact of Dynamic Tasks Assignment in Paced Mixed-Model Assembly Line with Moving Workers (S. Ehsan Hashemi-Petroodi, Simon Thevenin, Sergey Kovalev, Alexandre Dolgui)....Pages 509-517 Balancing and Configuration Planning of RMS to Minimize Energy Cost (Audrey Cerqueus, Paolo Gianessi, Damien Lamy, Xavier Delorme)....Pages 518-526 Front Matter ....Pages 527-527 Factors Affecting Shipyard Operations and Logistics: A Framework and Comparison of Shipbuilding Approaches (Jo Wessel Strandhagen, Yongkuk Jeong, Jong Hun Woo, Marco Semini, Magnus Wiktorsson, Jan Ola Strandhagen et al.)....Pages 529-537 Using the Smartphone as an Augmented Reality Device in ETO Industry (Niklas Jahn, Axel Friedewald, Hermann Lödding)....Pages 538-546 Exploring the Path Towards Construction 4.0: Collaborative Networks and Enterprise Architecture Views (Ovidiu Noran, David Romero, Sorin Burchiu)....Pages 547-556 The Potential for Purchasing Function to Enhance Circular Economy Business Models for ETO Production (Deodat Mwesiumo, Nina Pereira Kvadsheim, Bella Belerivana Nujen)....Pages 557-564 Planning Procurement Activities in ETO Projects (Kristina Kjersem, Marte Giskeødegård)....Pages 565-572 Maturity Model for Successful Cost Transformation in ETO Companies (Johann Gregori, Ralph Riedel)....Pages 573-580 Backlog Oriented Bottleneck Management – Practical Guide for Production Managers (Roman Ungern-Sternberg, Christian Fries, Hans-Hermann Wiendahl)....Pages 581-589 Cross-Functional Coordination Before and After the CODP: An Empirical Study in the Machinery Industry (Margherita Pero, Violetta G. Cannas)....Pages 590-597 Front Matter ....Pages 599-599 Short Agri-Food Supply Chains: A Proposal in a Food Bank (Aguinaldo Eduardo de Souza, João Gilberto Mendes dos Reis, Antonio Carlos Estender, Jorge Luiz Dias Agia, Oduvaldo Vendrametto, Luciana Melo Costa et al.)....Pages 601-608 Analysis of the New Frontier of Soybean Production in Brazil (José Alberto de Alencar Luz, João Gilberto Mendes dos Reis, Alexandre Formigoni)....Pages 609-615 Prediction of Cold Chain Transport Conditions Using Data Mining (Clayton Gerber Mangini, Nilsa Duarte da Silva Lima, Irenilza de Alencar Nääs)....Pages 616-623 Environmental Impact Classification of Perishable Cargo Transport Using Data Mining (Manoel Eulálio Neto, Irenilza de Alencar Nääs, Nilsa Duarte da Silva Lima)....Pages 624-630 Economic and Environmental Perfomance in Coffee Supply Chains: A Brazilian Case Study (Paula Ferreira da Cruz Correia, João Gilberto Mendes dos Reis, Rodrigo Carlo Toloi, Fernanda Alves de Araújo, Silvia Helena Bonilla, Jonatas Santos de Souza et al.)....Pages 631-639 Managing Perishable Multi-product Inventory with Supplier Fill-Rate, Price Reduction and Substitution (Flemming Max Møller Christensen, Kenn Steger-Jensen, Iskra Dukovska-Popovska)....Pages 640-648 Digital Technology Enablers for Resilient and Customer Driven Food Value Chains (Christos Emmanouilidis, Serafim Bakalis)....Pages 649-657 Front Matter ....Pages 659-659 Human–Robot Hybrid Service System Introduction for Enhancing Labor and Robot Productivity (Takeshi Shimmura, Ryosuke Ichikari, Takashi Okuma)....Pages 661-669 Forecasting Customers Visiting Using Machine Learning and Characteristics Analysis with Low Forecasting Accuracy Days (Takashi Tanizaki, Yuta Hanayama, Takeshi Shimmura)....Pages 670-678 A Study on Menu Planning Method for Managed Meal -Consideration of the Cost of Ordering Ingredients- (Kyohei Irie, Nobutada Fujii, Daisuke Kokuryo, Toshiya Kaihara)....Pages 679-685 Service System Design Considering Employee Satisfaction Through Introducing Service Robots (Tomomi Nonaka, Takeshi Shimmura, Nobutada Fujii)....Pages 686-692 Front Matter ....Pages 693-693 Exploring Synergies Between Circular Economy and Asset Management (Federica Acerbi, Adalberto Polenghi, Irene Roda, Marco Macchi, Marco Taisch)....Pages 695-702 Information Flows Supporting Circular Economy Adoption in the Manufacturing Sector (Federica Acerbi, Marco Taisch)....Pages 703-710 A Conceptual Model of the IT Ecosystem for Asset Management in the Global Manufacturing Context (Adalberto Polenghi, Irene Roda, Marco Macchi, Alessandro Pozzetti)....Pages 711-719 Front Matter ....Pages 721-721 Part Selection for Freeform Injection Molding: Framework for Development of a Unique Methodology (Elham Sharifi, Atanu Chaudhuri, Brian Vejrum Wæhrens, Lasse G. Staal, Saeed D. Farahani)....Pages 723-730 A Model for Cost-Benefit Analysis of Production Ramp-up Strategies (Khaled Medini, Antoine Pierné, John Ahmet Erkoyuncu, Christian Cornet)....Pages 731-739 Key Factors on Utilizing the Production System Design Phase for Increasing Operational Performance (Md Hasibul Islam, Zuhara Chavez, Seyoum Eshetu Birkie, Monica Bellgran)....Pages 740-748 Business Model Development for a Dynamic Production Network Platform (Stefan Wiesner, Larissa Behrens, Jannicke Baalsrud Hauge)....Pages 749-757 Changeable Closed-Loop Manufacturing Systems: A Case Study of Challenges in Product Take-Back (Markus Thomas Bockholt, Ann-Louise Andersen, Thomas Ditlev Brunoe, Jesper Hemdrup Kristensen, Michele Colli, Peter Meulengracht Jensen et al.)....Pages 758-766 Back Matter ....Pages 767-772