Advances in Mineral Resources, Geotechnology and Geological Exploration : Proceedings of the 7th International Conference on Mineral Resources, Geotechnology and Geological Exploration (MRGGE 2022), Xining, China, 18-20 March, 2022

The right of Ahmad Safuan Bin A Rashid & Junwen Zhang to be identified as the authors of the editorial material, and of the authors for their individual chapters, has been asserted in accordance with sections 77 and 78 of the Copyright, Designs and Patents Act 1988.All rights reserved. No part of this book may be reprinted or reproduced or utilised in any form or by any electronic, mechanical, or other means, now known or hereafter invented, including photocopying and recording, or in any information storage or retrieval system, without permission in writing from the publishers. Although all care is taken to ensure integrity and the quality of this publication and the information herein, no responsibility is assumed by the publishers nor the author for any damage to the property or persons as a result of operation or use of this publication and/or the information contained herein. Cover Title Page Copyright Page Table of contents Preface Committee member Mineral resources exploration and mining restoration technology Semi-industrial test research on beneficiation of a lead-zinc ore with high oxidation rate in southern Shaanxi 1 INTRODUCTION 2 PROCESS MINERALOGY RESEARCH 3 LABORATORY VALIDATION TEST STUDY 4 SEMI-INDUSTRIAL TEST RESEARCH 5 CONCLUSIONS ACKNOWLEDGMENTS REFERENCES Application progress of reversed-phase emulsion polymerization system in oil and gas field development 1 INTRODUCTION 2 POLYMERIZATION MECHANISM OF REVERSED-PHASE EMULSION 3 APPLICATION OF REVERSED-PHASE EMULSION POLYMERIZATION SYSTEM INTHE FIELD OF OIL AND GAS DEVELOPMENT 4 CONCLUSION ACKNOWLEDGMENTS REFERENCES Review of simultaneous hydraulic fracturing technology and field application 1 INTRODUCTION 2 SIMULTANEOUS FRACTURING TECHNIQUE 3 WAY FORWARD 4 CONCLUSION ACKNOWLEDGMENTS REFERENCES Practical research on the application of inflow-control technology in desert oilfield 1 INTRODUCTION 2 INFLOW-CONTROL FOR REDUCINGWATER PRODUCTION TECHNOLOGY 3 OPERATION PROCEDURE 4 APPLICATION AND RESULTS 5 CONCLUSION ACKNOWLEDGMENTS REFERENCES Research on the optimization of the re-open sequence of oil producers in the process of oilfield production resuming 1 INTRODUCTION 2 METHODOLOGY 3 RESULTS AND DISCUSSI ACKNOWLEDGMENTS REFERENCES Application and practice of compound dynamic disaster prevention technology in first mining face of deep mine 1 INTRODUCTION 2 ENGINEERING BACKGROUND 3 ANALYSIS OF DYNAMIC BISASTER CHARACTERISTICS OF THE FIRS TMINING FACE 4 PREVENTION AND CONTROL TECHNOLOGY OF COMPOUND DYNAMICDISASTER IN THE FIRST MININGFACE 5 PREVENTION AND CONTROL EFFECT OF COAL ROCK GAS DYNAMIC DISASTER 6 CONCLUSION ACKNOWLEDGMENTS REFERENCES Reservoir protection strategy in drilling stage of Tarim oilfield 1 INTRODUCTION 2 BASIC STATUS AND PROBLEM ANALYSIS OF RESERVOIR PROTECTION IN TARIMOILFIELD 3 DAMAGE MECHANISM AND PROTECTION STRATEGY OF DIFFERENT TYPES OFRESERVOIRS 4 CONCLUSION REFERENCES Study on construction technology of super long and super deep retaining wall structure with prestressed anchor cable 1 INTRODUCTION 2 PROJECT OVERVIEW AND HYDROGEOLOGICAL CONDITIONS 3 CONSTRUCTION PROCESS AND METHOD 4 CONCLUSION ACKNOWLEDGMENT REFERENCES Geochemical characteristics and genetic types of deep natural gas in dehui fault depression, Songliao basin 1 INTRODUCTION 2 GEOLOGICAL BACKGROUND 3 METHODS 4 RESULTS AND DISCUSSIONS 5 CONCLUSIONS ACKNOWLEDGMENT REFERENCES Research on flotation process of copper-nickel sulfide ore 1 INTRODUCTION 2 MATERIALS AND METHODS 3 RESULTS AND DISCUSSIONS 4 CONCLUSIONS ACKNOWLEDGMENTS REFERENCES Study on deformation characteristics of soft soil subgrade treated by plastic drainage board stacking preloading technology 1 INTRODUCTION 2 DEFORMATION SITUATION OF SOFT SOIL FOUNDATION TREATED WITHPLASTIC DRAINAGE BOARD STACKING PRELOADING 3 CONCLUSION REFERENCES Research and application of deep well drilling speed-up technology in the Bayan area 1 INTRODUCTION 2 OPTIMIZATION OF NEW TOOLS FOR SPEEDING UP 3 OPTIMIZATION OF NEW TECHNOLOGY FOR SPEEDING UP 4 APPLICATION AND ANALYSIS OF DRILLING SPEED-UP OPTIMIZATION TOOLS 5 CONCLUSION REFERENCES Study on characteristics of the conglomerate reservoir in Shahezi Formation of XJWZ 1 INTRODUCTION 2 SHAHEZI FORMATION ORDER DIVISION AND COMPARATIVE INTERPRETATION 3 GRAPHIC PICTURE 4 RESERVOIR CHARACTERISTICS AND PHYSICAL DISTRIBUTION 5 CONCLUSION REFERENCES Application of mine bore-hole transient electromagnetic method in rapid excavation roadway 1 INTRODUCTION 2 PRINCIPLE OF BOREHOLE TRANSIENT ELECTROMAGNETIC DETECTION 4 DATA PROCESSING METHOD 5 ENGINEERING APPLICATIONS 6 CONCLUSIONS ACKNOWLEDGMENTS REFERENCES Research and application of production technology by layers in Agadem oilfield, Niger 1 INTRODUCTION 2 RESEARCH THE TECHNOLOGY OF ELECTRIC SWITCH TOOLS CONTROLLEDSEPARATE LAYER OIL PRODUCTION 3 APPLICATION IN AGADEM OILFIELD 4 CONCLUSION REFERENCES Discussion on long open-hole sidetracking technology based on an ultra-deep well in the Northern Tarim Basin 1 INTRODUCTION 2 SIDETRACKING PROCESS 3 DIFFICULTIES IN SIDETRACKING 4 THINKING AND PRACTICE OF LONG OPEN-HOLE SIDETRACKING INULTRA-DEEP WELLS 5 CONCLUSION REFERENCES Development and application of hole integrated blowout prevention system 1 INTRODUCTION 2 OCCURRENCE CHARACTERISTICS OF COAL (ROCK) LAYERS 3 CURRENT STATUS OF DRILLING CONSTRUCTION 4 THE COMPONENT COMPOSITION AND ANALYSIS OF THE INTEGRATEDBLOWOUT PREVENTION SYSTEM 5 TECHNICAL COMPARISON 6 ANALYSIS OF ECONOMIC AND SOCIAL BENEFITS 7 CONCLUSION ACKNOWLEDGMENTS REFERENCES Distribution characteristics of Neogene remaining oil in M oilfield 1 INTRODUCTION 2 METHODS AND MATERIALS 3 RESULTS AND DISCUSSIONS 4 CONCLUSION ACKNOWLEDGMENTS REFERENCES The application of sensor-based logging technology in logging 1 INTRODUCTION 2 THE PRESENT SITUATION AND EXISTING PROBLEMS OF LOGGINGTECHNOLOGY IN CHINA 3 COMMON OIL LOGGING TECHNOLOGY 4 APPLICATION OF OIL LOGGING TECHNOLOGY BASED ON SENSOR REFERENCES Research on the application of carrier phase difference technology in geological exploration 1 INTRODUCTION 2 GPS-RTK TECHNOLOGY OVERVIEW 3 PRACTICAL APPLICATION OF GPS-RTK TECHNOLOGY IN GEOLOGICALEXPLORATION ENGINEERING SURVEY 4 GPS-RTK TECHNOLOGY APPLICATION NOTES 5 CONCLUSION REFERENCES Research on geological structure characteristics and disaster prevention and control Analysis of blockage characteristics and exploration of unblocking processes in unconsolidated sandstone reservoirs 1 RESERVOIR CHARACTERISTICS 2 ANALYSIS OF BLOCKAGE MATERIAL CHARACTERISTICS 3 ANALYSIS OF PRODUCTION CHARACTERISTICS 4 SUGGESTIONS FOR UNBLOCKING PROCESSES REFERENCES Rheological optimization of drilling fluid in the upper salt formation of ultra-deep wells in Tarim Basin 1 INTRODUCTION 2 APPLICATION OF DRILLING FLUID IN UPPER SALT FORMATION 3 RHEOLOGICAL OPTIMIZATION DESIGN OF DRILLING FLUID IN UPPER SALTFORMATION 4 CONCLUSIONS FUNDING REFERENCES Study on diffusion behavior of water molecules in mineral and vegetable oil 1 INTRODUCTION 2 MOLECULAR MODELLING AND SIMULATION DETAILS 3 RESULTS AND DISCUSSIONS 4 CONCLUSIONS ACKNOWLEDGMENTS REFERENCES Classification and safety precautions of blasting technology 1 INTRODUCTION 2 ROADWAY DRIVING AND BLASTING 3 CONTROLLED BLASTING 4 CONCLUSIONS ACKNOWLEDGMENTS REFERENCES Research on swelling and deformation characteristics of surrounding rock of Lijiaxia diversion tunnel, NW China 1 INTRODUCTION 2 ENGINEERING BACKGROUND 3 PHYSICAL TEST OF EXPANSION PROPERTIES 4 NUMERICAL ANALYSIS OF STRESS-STRAIN CHARACTERISTICS 5 CONCLUSION ACKNOWLEDGMENTS REFERENCES Study on design method of super long and super deep retaining wall structure with prestressed anchor cable 1 INTRODUCTION 2 PROJECT OVERVIEW AND SURVEY VOLUME 3 ANALYSIS AND EVALUATION OF GEOTECHNICAL ENGINEERING 4 STRUCTURAL CALCULATION AND DESIGN METHODS 5 CONCLUSIONS ACKNOWLEDGMENT REFERENCES Study on internal structure and interface development characteristics of thick oil layer in block D of L oilfield 1 INTRODUCTION 2 INTERLAYER TYPE DIVISION BASED ON SAND BODY GENETIC MECHANISM 3 RESEARCH ON STRUCTURAL INTERFACE CHARACTERISTICS 4 STATISTICAL RESULTS OF STRUCTURAL INTERFACE DISTRIBUTIONCHARACTERISTICS IN ZONE D 5 STUDY ON THE PREDICTION METHOD OF DETERMINING DIFFERENT TYPES OFSTRUCTURAL INTERFACES IN THE SEDIMENTARY UNIT OF SA II FORMATION 6 CONCLUSION REFERENCES Comprehensive evaluation of source rocks characteristics in Dehui Area, Songliao Basin 1 INTRODUCTION 2 METHODS 3 RESULTS AND DISCUSSION 4 CONCLUSION ACKNOWLEDGMENTS REFERENCES Treatment for highway tunnel crossing super-large karst cave: A case study 1 INTRODUCTION 2 METHODS SOLUTION 3 TUNNEL SAFETY ASSESSMENT 4 CONCLUSIONS REFERENCES Simulation study on the tensile performance of connection joints between self-locking and unlocking steel structure modules 1 INTRODUCTION 2 FINITE ELEMENT ANALYSIS 3 CONCLUSIONS AND PROSPECT REFERENCES Study on fine combination method of isolated breakpoints in N1# fault area of oilfield A 1 INTRODUCTION 2 BLOCK OVERVIEW 3 STUDY ON COMBINATION METHOD OF SCATTERED SMALL FAULTS 4 CAUSES AND COMBINATION RESULTS OF ISOLATED BREAKPOINTS INOILFIELD A 5 CONCLUSION REFERENCES Study on rock mechanics characteristics and its influence on hydraulic fracture propagation in BZ27 oilfield 1 INTRODUCTION 2 EXPERIMENTAL TESTING OF ROCK MECHANICS PROPERTIES 3 ANALYSIS OF IN-SITU STRESS PROFILE CHARACTERISTICS 4 INFLUENCE OF ROCK MECHANICS PROPERTIES ON HYDRAULIC FRACTURING 5 CONCLUSIONS REFERENCES Analysis of the influence of soft foundation treatment measures on the engineering characteristics of adjacent pile foundations and treatment effect under surcharge 1 INTRODUCTION 2 PROJECT OVERVIEW 3 ESTABLISHMENT AND VERIFICATION OF NUMERICAL SIMULATION MODEL 4 ANALYSIS OF NUMERICAL SIMULATION RESULTS 5 CONCLUSIONS REFERENCES Research on indoor test method for shear strength of rock-concrete interface in transmission line engineering 1 INTRODUCTION 2 TEST PROCESS 3 TEST RESULTS AND DISCUSSIONS 4 CONCLUSION ACKNOWLEDGMENTS REFERENCES Research on finite element method for non-aqueous contaminant transport in unsaturated soil 1 INTRODUCTION 2 FUNDAMENTAL THEORY OF THREE-PHASE FLOW IN POROUS MEDIA 3 NUMERICAL DISCRETIZATION FORMULATIONS USING THE FINITE ELEMENTMETHOD 4 VALIDATION OF SELF-DEVELOPED SOURCE PROGRAM MIG-3PF 5 CONCLUSION ACKNOWLEDGMENTS REFERENCES Determination of thickness of the reserved protective layer of temporary filling body 1 INTRODUCTION 2 THEORETICAL CALCULATION OF RESERVED PROTECTIVE LAYER THICKNESS 3 NUMERICAL SIMULATION OF BLASTING PARAMETERS OF TEMPORARYFILLING BODY 4 FIELD TEST 5 CONCLUSIONS REFERENCES Direct shear tests on three types of expansive soils at different water contents 1 INTRODUCTION 2 TEST MATERIALS AND TEST METHODS 3 TEST RESULTS AND ANALYSIS 4 DISCUSSION 5 CONCLUSION ACKNOWLEDGMENTS REFERENCES Study on regional landslide hazard supported by multi-source data 1 INTRODUCTION 2 ANALYSIS OF LANDSLIDE SUSCEPTIBILITY 3 TIME-FREQUENCY AND STRENGTH ANALYSIS 4 LANDSLIDE HAZARD ANALYSIS 5 CONCLUSION ACKNOWLEDGMENTS REFERENCES Research on dynamic characteristics of bottom hole assembly 1 INTRODUCTION 2 BASIC EQUATION 3 RESULT ANALYSIS 4 CONCLUSION REFERENCES Single hole dilution method combined with numerical simulation to judge the leakage position of diaphragm wall 1 INTRODUCTION 2 PROJECT OVERVIEW 3 DETERMINATION OF FLOW RATE BY SINGLE-HOLE DILUTION METHOD 4 NUMERICAL SIMULATIONS OF GROUND-TO-WALL LEAKAGE 5 CONCLUSIONS REFERENCES Performance evaluation of barite chelate blockage removal agent in Niger Oilfield 1 INTRODUCTION 2 METHODS AND MATERIALS 3 TEST RESULTS AND DISCUSSIONS 4 CONCLUSIONS ACKNOWLEDGMENTS REFERENCES Influence of stress evolution of coal pillar under unilateral water pressure 1 INTRODUCTION 2 METHODS AND MATERIALS 3 RESULTS AND DISCUSSION 4 CONCLUSION ACKNOWLEDGMENTS REFERENCES Remote sensing modeling measurement technology and numerical analysis Research on the prediction method of coalbed methane production based on GA-BP 1 INTRODUCTION 2 MODEL ESTABLISHMENT 3 EXAMPLE APPLICATION 4 CONCLUSIONS ACKNOWLEDGMENTS REFERENCES Analysis of biodiversity in Liaoning Province based on GIS 1 INTRODUCTION 2 BIODIVERSITY CONSERVATION IN CHINA 3 DATA SOURCE AND PROCESSING 4 FUNCTIONAL ZONING OF PRIORITY AREAS 5 CONCLUSION REFERENCES GIS-based analysis of the spatial pattern of grassland vegetation cover 1 INTRODUCTION 2 OVERVIEW OF THE STUDY AREA 3 SAMPLING AND DATA ANALYSIS TEXT AND INDENTING 4 ANALYSIS OF RESULTS 5 CONCLUSION REFERENCES Early warning method of water inrush in mining area based on a curve similarity analysis model 1 INTRODUCTION 2 RELATED THEORIES AND ALGORITHMS 4 EXPERIMENTAL ANALYSIS 5 CONCLUSION REFERENCES Experimental study on single pile model under combined load in loess area 1 INTRODUCTION 2 MATERIALS AND METHODS 3 RESULTS 4 CONCLUSIONS REFERENCES Numerical simulation of karst collapse based on hydrodynamic – Mechanical coupling method 1 INTRODUCTION 2 GEOLOGICAL CONDITIONS OF COVERED KARST IN THE RESEARCH AREA 3 MATHEMATICAL MODEL 4 NUMERICAL MODEL CONSTRUCTION 5 CONCLUSION ACKNOWLEDGMENTS REFERENCES Study on the optimal design of deep roadway support based on three-dimensional in-situ stress measurement 1 INTRODUCTION 2 GEOLOGICAL STRUCTURE AND ENGINEERING BACKGROUND OF MINE FIELD 3 MEASURING STRATA STRESS 4 NUMERICAL SIMULATION ANALYSIS AFTER SUPPORT OPTIMIZATION 5 CONCLUSION REFERENCES Study on the secondary consolidation coefficient of soft soil based on various influencing factors 1 INTRODUCTION 2 EXPERIMENTAL RESEARCH PROTOCOL 3 ANALYSIS OF TEST RESULTS 4 CONCLUSION REFERENCES Large-scale piping detection method based on thermal imaging and computer technology 1 INTRODUCTION 2 PIPING DETECTION METHOD 3 RELATEDWORKS 4 CONCLUSION ACKNOWLEDGMENT REFERENCES Study on geological deformation prediction of shield tunnel based on multi-source information fusion 1 INTRODUCTION 2 INFORMATION FUSION 3 GEOLOGICAL DEFORMATION PREDICTION OF SHIELD TUNNEL BASED ONMULTI-INFORMATION FUSION 4 CONCLUSIONS REFERENCES Design and application of intelligent monitoring based on MEMS sensors 1 INSTRUCTION 2 CONSTRUCTION OF INTELLIGENT SENSING EQUIPMENT BASED ON MEMSSENSORS 3 SOFTWARE FUNCTIONAL ARCHITECTURE 4 ACCURACY DETERMINATION OF INTELLIGENT SENSOR EQUIPMENT 5 CONCLUSION ACKNOWLEDGMENTS REFERENCES Measuring discharge of theYangtze river based on coastal acoustic tomography 1 INTRODUCTION 2 MATERIALS AND METHODS 3 RESULT & DISCUSSION 4 CONCLUSIONS ACKNOWLEDGMENT REFERENCES Intelligent advanced geological prediction model of tunnel based on wavelet neural network 1 INTRODUCTION 2 OVERVIEW OF COMMON ADVANCED GEOLOGICAL PREDICTION METHODS 3 NEURAL NETWORK PREDICTION MODEL 4 CONCLUSIONS REFERENCES Comparison and numerical simulation analysis of treatment methods for airport alluvial lacustrine soft foundation 1 INTRODUCTION 2 PARAMETERS AND MODELS 3 SIMULATION RESULT ANALYSIS 4 CONCLUSIONS REFERENCES Numerical analysis of pull-out bearing characteristics of torpedo anchor in deep-sea engineering 1 INTRODUCTION 2 MODEL ESTABLISHMENT AND VERIFICATION 3 RESULTS AND DISCUSSION 4 CONCLUSIONS ACKNOWLEDGMENTS REFERENCES Study on landslide failure process and mechanism based on discrete element method 1 INTRODUCTION 2 LANDSLIDE IN JINFENG VILLAGE 3 MICRO PARAMETER SELECTION PROCESS 4 ANALYSIS OF NUMERICAL SIMULATION RESULTS 5 CONCLUSIONS REFERENCES TOC content prediction of source rocks based on machine learning 1 INTRODUCTION 2 METHODS 3 RESULTS AND DISCUSSION 4 CONCLUSION ACKNOWLEDGMENTS REFERENCES Analysis of the multi-functional spatiotemporal pattern of cultivated land and its influencing factors in the area of Zuoyoujiang in Guangxi Province 1 INTRODUCTION 2 RESEARCH STATUS 3 OVERVIEW OF THE STUDY AREA AND DATA SOURCES 4 RESULTS AND ANALYSIS 5 CONCLUSION ACKNOWLEDGMENTS REFERENCES Model test study on thermodynamic characteristics and bearing deformation behavior of energy pile in loess foundation 1 GENERAL INTRODUCTION 2 MODEL TEST 3 TEST RESULTS AND ANALYSIS 4 CONCLUSIONS REFERENCES Study on the application of the relationship between rock mass basic quality and rock firmness coefficient 1 INTRODUCTION 2 PROJECT 3 ANALYSIS OF THE RELATIONSHIP BETWEEN BQ AND F 4 APPLICATION ACKNOWLEDGMENTS REFERENCES Application of early identification of water invasion and prediction of water breakthrough time in M gas reservoir 1 INTRODUCTION 2 OVERVIEW OF GAS RESERVOIR 3 IDENTIFICATION OFWATER INVASION IN THE GAS RESERVOIR 4 PREDICTION OFWATER BREAKTHROUGH TIME 5 CONCLUSION REFERENCES Author index Advances in Mineral Resources, Geotechnology and Geological Exploration focuses on the research of mineral resources, geotechnology and geological exploration. The proceedings features the most cutting-edge research directions and achievements related to geology. Subjects in this proceedings include: ℗ʺ Materials of geography ℗ʺ Resource exploration ℗ʺ Geotechnical engineering ℗ʺ Rock mechanics and rock engineering The works of this proceedings can promote development of geology, resource sharing, flexibility and high efficiency. Thereby, promote scientific information interchange between scholars from top universities, research centers and high-tech enterprises working all around the world