Advances in Civil Function Structure and Industrial Architecture : Proceedings of the 5th International Conference on Civil Function Structure and Industrial Architecture (CFSIA 2022), Harbin, China, 21-23 January 2022

Advances in Civil Function Structure and Industrial Architecture contains the Proceedings of 5th International Conference on Civil Function Structure and Industrial Architecture (CFSIA 2022), which was held on January 21-23, 2022, in Harbin, China. The Proceedings of CFSIA 2022 is intended to share scientific research results and cutting-edge technologies in the field of civil function structure and control engineering. Researchers, practitioners and academics in these disciplines will find the book useful. Over 90 papers are featured. Many topics are covered, but the contributions may be seen to fall into one of six broad themes of the conference, namely: (i) Engineering Structure (Engineering Advanced Technology, Engineering Structure and Seismic Resistance, High-rise Building and Large-span Structure, Bridge Engineering, Special Structure, Construction Technology, Monitoring and Control of Structure, Cartography and GIS, Concrete Structure, Construction and Control, etc.); (ii) Intelligent Building (Predictive Maintenance, Converged Networks, Wireless Retrofit, Biometric Integration, Computer Management System Engineering, Building Equipment Automatic Control System Engineering, etc.); (iii) Smart City (Intelligent Construction, Intelligent Transportation, Risk Management and Decision Making for Intelligent Construction, Intelligent Building Automation Control System, etc.); (iv) Structural Seismic Resistance (Structural Seismic Design, Earthquakes and Ground Motions, Building Site, Foundation and Basis, Principles of Structural Seismic Design Calculation, Seismic Shear Adjustment and Minimum Seismic Shear Requirements, etc.); (v) Monitoring and Testing (Steel Structure Stress Monitoring, Stress Change Monitoring for Large Construction Projects, Structural Health Monitoring, Foundation Pit Monitoring, Temperature Monitoring for Large Volume Concrete Pouring, etc.); (vi) Engineering Facility (Machinery Facility, Electrical Facility, Stationary Facility, Non-standard Facility, Compressor, Continuous Transmission Facility, etc.). Cover Title Page Copyright Table of contents Preface Committee members Analysis of the function and mechanical properties of civil structures Influence of annular opening parameters on harmful gas removal performance of a large space circular coal storage dome under natural ventilation 1 INTRODUCTION 2 METHODS 3 RESULT AND DISCUSSION 4 CONCLUSION ACKNOWLEDGMENT REFERENCES The analysis and treatment of thermal void of the rigid hanger in a power plant 1 INTRODUCTION 2 THE HAZARDS OF RIGID HANGER THERMAL VOID 3 EXAMPLES AND ANALYSIS 4 SOLUTION 5 CONCLUSION REFERENCES Study on deformation control measures of local surrounding rock of a large-span underground powerhouse under unfavorable geological conditions 1 INTRODUCTION 2 DEFORMATION OF LOCAL SURROUNDING ROCK 3 ANALYSIS OF LOCAL SURROUNDING ROCK DEFORMATION 4 DEFORMATION CONTROL MEASURES 5 EFFECT EVALUATION OF DEFORMATION CONTROL MEASURES 6 CONCLUSION REFERENCES System reliability analysis of a self-anchored suspension bridge based on the integral dimension reduction method 1 INTRODUCTION 2 APPROXIMATE CALCULATION PRINCIPLE OF SYSTEM RELIABILITY BASED ONTHE IDR METHOD 3 STATIC RELIABILITY ANALYSIS METHOD OF A MULTI-TOWER SELF-ANCHOREDSUSPENSION BRIDGE UNDER BEARING CAPACITY LIMIT STATE 4 CASE STUDY 5 SENSITIVITY ANALYSIS OF RELIABILITY INDEX PARAMETERS 6 CONCLUSION REFERENCES Experimental study on the mechanical properties of self-insulated blocks made of recycled concrete from volcanic slag in Changbai Mountain 1 INTRODUCTION 2 TEST MATERIAL AND TEST PROTOCOL 3 BLOCK DESIGN OPTIONS 4 MECHANICAL PERFORMANCE TEST 5 SOFTENING FACTOR TEST 6 CONCLUSION ACKNOWLEDGMENTS REFERENCES Design and ANSYS analysis of green and environmental prefabricated wall structure 1 INTRODUCTION 2 TEST SCHEME AND DESIGN OF FABRICATEDWALL PANELS 3 THEORETICAL ANALYSIS 4 ANSYS FINITE ELEMENT ANALYSIS 5 CONCLUSION AND PROSPECT ACKNOWLEDGMENT REFERENCES Experimental study on mechanical properties of C-type environmentally friendly self-insulation block 1 INTRODUCTION 2 CONCRETE BLOCK DESIGN 3 EXPERIMENTAL STUDY ON MECHANICAL PROPERTIES OF BLOCK 6 CONCLUSION 5 THEORETICAL CALCULATION AND ANALYSIS 6 CONCLUSION 7 PROSPECT ACKNOWLEDGMENTS Experimental study on the flexural properties of RC beams reinforced with SMA wires 1 INTRODUCTION 2 CONSTRUCTION AND GEOMETRICAL DIMENSIONS OF SPECIMENS 3 BENDING PERFORMANCE TEST OF RC BEAM REINFORCED WITH SMA WIREEXTERNALLY 4 CONCLUSION REFERENCES Research on mechanical properties of reinforced Ultra-high Performance Concrete beams 1 INTRODUCTION 2 EXPERIMENTAL PROGRAM 3 EXPERIMENTAL RESULTS AND DISCUSSIONS 4 CONCLUSION 5 LIMITATION AND NEXT RESEARCH PLAN REFERENCES Performance of composite plasterboards in thermal protection 1 INTRODUCTION 2 PERFORMANCE OF GYPSUM PLASTERBOARD 3 COMPOSITE PANELS 4 FIRE TEST ON THE PERFORMANCE OF THE COMPOSITE PANEL 5 SUGGESTIONS 6 CONCLUSION REFERENCES Analysis of unsymmetrical pressure stabilization of steel plate pile cofferdam in an ultra-thick pebble layer 1 INTRODUCTION 2 ENGINEERING SITUATION 3 COFFERDAM-SOIL LAYER FINITE ELEMENT MODEL 4 CONCLUSION REFERENCES Study on mechanical properties of freeze – Thaw concrete under cyclic loading 1 INTRODUCTION 2 EXPERIMENTAL PROGRAMS 3 TEST RESULTS AND ANALYSIS 4 CONCLUSIONS REFERENCES Analysis of the ultra-long group piles with small spacing bearing performance of complex pebble stratum 1 INTRODUCTION 2 ENGINEERING SITUATION 3 FINITE ELEMENT MODEL 4 RESULTS AND ANALYSIS OF NUMERICAL SIMULATION 5 CONCLUSION REFERENCES Dynamic response analysis of existing multi-span bridge affected by undercrossing tunnel blasting 1 INTRODUCTION 2 ANALYSIS METHODS 3 CASE STUDY 4 CONCLUSION ACKNOWLEDGMENTS REFERENCES Application of BIM technology in large-span space special-shaped steel structures 1 INTRODUCTION 2 PARAMETERIZATION BASED ON REVIT 3 PARAMETRIC MODELING OF AN AIRPORT TOLL STATION BASED ON BIM 4 STRESS ANALYSIS OF STEEL STRUCTURE BASED ON BIM 5 CONCLUSIONS REFERENCES Effect of fly ash and silica fume on the mechanical properties of high strength steel fiber concrete 1 INTRODUCTION 2 EXPERIMENT OVERVIEW 3 ANALYSIS AND DISCUSSION OF TEST RESULTS 4 CONCLUSION 5 EXTENSION REFERENCES Durability of thermal insulation for residential buildings with thin plastered exterior walls 1 INTRODUCTION 2 DURABILITY RESEARCH METHOD FOR THIN PLASTERED EXTERIORINSULATION OF RESIDENTIAL BUILDINGS 3 THE EXPERIMENTAL TEST 4 CONCLUSION REFERENCES Analysis of the mechanics characteristic of a large diameter shield tunnel in the compound stratum 1 INTRODUCTION 2 ENGINEERING SITUATION 3 FORCE DISTRIBUTION AND ANALYSIS OF TUBE SHEET 4 CONCLUSION REFERENCES Impacts of high temperatures on hybrid basalt-polypropylene fiber-reinforced concrete’s mechanical property 1 INTRODUCTION 2 PREPARATION AND EXPERIMENT OF SPECIMENS 3 TEST RESULTS AND DISCUSSIONS 4 CONCLUSION REFERENCES Cause analysis of abnormal uplift pressure of overflow section of a gravity dam 1 INTRODUCTION 2 MONITORING OVERVIEW 3 QUALITATIVE ANALYSIS OF THE CHANGING LAW OF UPLIFT PRESSURE LAYOUTOF TEXT 4 QUANTITATIVE ANALYSIS OF THE CHANGING LAW OF UPLIFT PRESSURE 5 WATER FILLING AND DISCHARGING TEST OF BOTTOM HOLE GATE OFOVERFLOW DAM 2# 6 REPAIR TEST OF THE CRACKS IN THE DIVISION PIER OF 2# BOTTOM HOLE 7 CONCLUSION REFERENCES Safety research on structural characteristics of sluice after extreme conditions 1 INTRODUCTION 2 MATERIALS AND METHODS 3 CASE STUDY 4 CONCLUSION ACKNOWLEDGMENTS REFERENCES Research, test and apply of building material properties Experimental study on proportioning of an activated coal gangue concrete filling wall 1 INTRODUCTION 2 NUMERICAL SIMULATION STUDY ON PRESET BACKFILLWALL 3 EXPERIMENTAL SCHEME 4 MATERIAL PREPARATION 5 UNIAXIAL COMPRESSIVE STRENGTH TEST 6 CONCLUSION REFERENCES Research on the application of energy-saving polymer materials in the field of construction engineering 1 INTRODUCTION 2 TRADITIONAL ENERGY-SAVING POLYMER MATERIALS 3 NEW POLYMER MATERIALS 4 CURRENT STATUS OF APPLICATION IN ARCHITECTURE 5 CONCLUSION ACKNOWLEDGMENTS REFERENCES Experimental study on the self-repair performance of smart concrete beams strengthened with SMA wire 1 INTRODUCTION 2 CONSTRUCTION AND GEOMETRICAL DIMENSIONS OF SPECIMENS 3 SMA SMART CONCRETE BEAM SELF-REPAIR PERFORMANCE TEST 4 CONCLUSION REFERENCES Analysis and discussion on the chromatic aberration of a cast-in-place concrete slab 1 INTRODUCTION 2 TYPE OF CHROMATIC ABERRATION AND ITS SOLUTIONS 3 PROJECT PROFILE 4 CHROMATIC ABERRATION ANALYSIS 5 PREVENTIVE MEASURES 6 SOLUTIONS 7 CONCLUSIONS REFERENCES Measurement of blast furnace slag hydration heat with Portland cement 1 INTRODUCTION 2 MATERIALS AND METHODS 3 TEST RESULTS AND DISCUSSIONS 4 CONCLUSION ACKNOWLEDGMENTS REFERENCES Research on the influence of steel fiber on the frost resistance of internal cured concrete 1 INTRODUCTION 2 TEST OVERVIEW 3 TEST RESULTS AND DISCUSSIONS 4 CONCLUSION REFERENCES Analysis on protective performance of steel plate concrete reinforced masonry explosion-proof wall under explosion load 1 INTRODUCTION 2 EXPLOSION DYNAMIC MODEL 3 DYNAMIC RESPONSE SIMULATION OF BLASTWALL 4 PROTECTION PERFORMANCE ANALYSIS 5 CONCLUSION ACKNOWLEDGMENTS REFERENCES Study on the acid resistance of polymer-modified concrete in citric acid and sulfuric acid environments 1 INTRODUCTION 2 EXPERIMENTAL SECTION 3 TEST RESULTS AND DISCUSSIONS 4 CONCLUSION REFERENCES Research on the recoverable deformation performance of SMA concrete beams 1 INTRODUCTION 2 EXPERIMENTAL DESIGN 3 TEST ANALYSIS 4 CONCLUSION REFERENCES Experimental research on anti-freezing and thawing of concrete for large-scale water aqueducts in cold regions 1 INTRODUCTION 2 OPTIMAL PROTECTIVE MATERIAL 3 INDOOR FREEZE-THAW RESISTANCE TEST 4 ON-SITE PROTECTION TEST 5 CONCLUSIONS REFERENCES Analysis of the freeze-thaw durability of foamed concrete 1 INTRODUCTION 2 EXPERIMENTS AND METHODS 3 ANALYSIS OF EXPERIMENTAL RESULTS 4 CONCLUSION REFERENCES Triaxial test on the improvement of Nanyang expansive soil by lime blast furnace slag 1 INTRODUCTION 2 TEST MATERIALS, INSTRUMENTS, AND PROTOCOLS 3 TEST RESULTS AND ANALYSIS REFERENCES Carbon Fiber-Reinforced Polymer (CFRP) and green high-performance concrete 1 INTRODUCTION 2 PROBLEMS OF CONCRETE 3 CARBON FIBER-REINFORCED POLYMER IN STRENGTHENING CONCRETEBEAMS 4 GREEN CONCRETE 5 SELF-HEALING CONCRETE BASED ON MICROENCAPSULATEDMICROORGANISM 6 CONCLUSION REFERENCES Influence of slurry silo pressure on tunnel face and soil mass when the slurry shield passes through water rich sand layer 1 INTRODUCTION 2 ENGINEERING BACKGROUND 3 FINITE ELEMENT SIMULATION 4 ANALYSIS OF NUMERICAL SIMULATION RESULTS 5 CONCLUSION REFERENCES Effect of curing temperature on expansion rate of foamed concrete 1 INTRODUCTION 2 TEST MATERIALS AND METHODS 3 EXPERIMENTAL RESULTS AND ANALYSIS 4 CONCLUSION REFERENCES Research on the influence of the width of the prefabricated concrete anti-collision wall on the anti-collision performance 1 INTRODUCTION 2 RESEARCH OBJECT 3 FINITE ELEMENT MODEL 4 SIMULATION RESULT ANALYSIS 5 CONCLUSION REFERENCES Two types of corrosion resistant high-performance concrete: ECC and EPS concrete 1 INTRODUCTION 2 PROBLEMS AND CAUSES OF CONCRETE 3 CORROSION PROTECTION MEASURES 4 CONCLUSION REFERENCES Influence of different fine-grained soil content and saturation state on shear behavior of sandy soil 1 INTRODUCTION 2 TEST MATERIAL 3 TEST PROCESS AND RESULT ANALYSIS 4 CONCLUSION REFERENCES The experimental preparation methods and characteristics of high-performance fiber-reinforced concrete 1 INTRODUCTION 2 THE TENSILE PERFORMANCE OF CONCRETE 3 ULTRA-HIGH-PERFORMANCE FIBER-REINFORCED CONCRETE (HPFRC) 4 CHARACTERISTICS AND LIMITATIONS OF HPFRC 5 CONCLUSION REFERENCES Prediction and precaution of reinforced concrete bridges durability under the risk of carbonation 1 INTRODUCTION 2 CONCRETE CARBONATION AND REINFORCEMENT CORROSION 3 CONCRETE CARBONATION MODEL 4 MEASURE TO PREVENT CARBONATION OF CONCRETE 5 CONCLUSION REFERENCES Effect of confining pressure on dynamic properties of plastic concrete 1 INTRODUCTION 2 CONSTRUCTION AND GEOMETRICAL DIMENSIONS OF SPECIMENS 3 TEST RESULTS AND DISCUSSIONS 4 CONCLUSION ACKNOWLEDGMENTS REFERENCES Effect of vibration mixing on the microstructures and macroscopic properties of high-performance concrete 1 INTRODUCTION 2 TEST MATERIAL INFORMATION AND TEST METHOD 3 ANALYSIS OF EXPERIMENTAL RESULTS 4 ANALYSIS OF MICROSCOPIC TEST RESULTS 5 CONCLUSION REFERENCES Application of reinforced concrete bond slip connection element under cyclic load 1 INTRODUCTION 2 BOND SLIP CONSTITUTIVE RELATION 3 CONNECTION UNIT 4 EXAMPLE 5 CONCLUSION REFERENCES Impact characterization of recycled aggregate concrete based on SHPB experiments 1 INTRODUCTION 2 EXPERIMENTAL SETUP 3 EXPERIMENTAL RESULTS 4 CONCLUSIONS ACKNOWLEDGMENTS REFERENCES Research on flexural performance of steel bar plus SMA rod concrete beam 1 INTRODUCTION 2 EXPERIMENTAL DESIGN 3 TEST ANALYSIS 4 CONCLUSION REFERENCES Experimental study on the strength characteristics of filling material improved by steel slag in the loess railway subgrade 1 INTRODUCTION 2 RAW MATERIAL CHARACTERISTICS 3 DETERMINATION OF THE AMOUNT OF STEEL SLAG IMPROVED LOESS 4 STRENGTH TEST OF LOESS IMPROVED BY STEEL SLAG 5 CONCLUSION REFERENCES Study on strength of red clay under dry-wet cycle 1 INTRODUCTION 2 TRIAXIAL TEST 3 TEST RESULTS AND DISCUSSIONS 4 CONCLUSION REFERENCES Surface porosity characteristics of self-compacting barite concrete after assisted vibration 1 INTRODUCTION 2 TEST DESIGN 3 TEST DATA ANALYSIS 4 CONCLUSION REFERENCES Experimental study on testing the strength of underwater concrete by rebound method 1 INTRODUCTION 2 TEST PREPARATION 3 TEST PLAN AND RESULT ANALYSIS 4 CONCLUSION REFERENCES Experimental study on strength performance of a steel slag loess mixture for a highway subgrade 1 INTRODUCTION 2 BASIC PROPERTIES OF RAW MATERIALS 3 TEST SCHEME 4 ANALYSIS OF TEST RESULTS 5 CONCLUSION REFERENCES Evaluation of the influence of hopper specifications on gravel cushion modulus under preloading load 1 INTRODUCTION 2 PROJECT OVERVIEW 3 RELATIONSHIP TEST BETWEEN PRELOAD AND MODULUS 4 INFLUENCE OF DIFFERENT HOPPER SIZE ON PRELOADING LOAD 5 CONCLUSION REFERENCES Study on influencing factors of workability of plastic concrete 1 INTRODUCTION 2 EXPERIMENTAL PROGRAMS 3 RESULTS AND DISCUSSION 4 CONCLUSION ACKNOWLEDGMENTS REFERENCES Research on water infiltration and treatment effect of high fill composite foundation based on water soaking test 1 INTRODUCTION 2 FIELD IMMERSION TEST 3 NUMERICAL SIMULATION OF IMMERSION TEST 4 EVALUATION OF FOUNDATION TREATMENT 5 CONCLUSIONS ACKNOWLEDGMENTS REFERENCES Study on the influence of ultra-fine limestone powder composite admixture on concrete properties 1 INTRODUCTION 2 EXPERIMENTAL STUDIES 3 TEST RESULTS AND ANALYSIS 4 CONCLUSION REFERENCES Optimization of steam curing for precast concrete components 1 INTRODUCTION 2 TEST MATERIALS AND INSTRUMENTS 3 MIX RATIO OF TEST CONCRETE 4 TEST METHOD 5 RESULTS AND ANALYSIS 6 CONCLUSION REFERENCES Field test of a medium-size double-span box-type corrugated steel bridge 1 INTRODUCTION 2 OVERVIEW AND TEST SCHEME 3 RESULT ANALYSIS AND DISCUSSION 4 DISCUSSION 5 RESEARCH LIMITATIONS AND RECOMMENDATIONS 6 CONCLUSION 7 NOTATION LIST REFERENCES Experimental study on size effect of carbon fiber reinforced concrete subjected to quasi-static compression 1 INTRODUCTION 2 TEST 3 ANALYSIS AND DISCUSSION 4 CONCLUSIONS REFERENCES Building construction technology and engineering seismic detection Study on the support technology of soft rock roadway with thin bedrock in Zhaogu’s first mine 1 INTRODUCTION 2 GEOLOGICAL AND TECHNICAL CONDITIONS 3 SOFT ROCK LANEWAY SUPPORT PRINCIPLE 4 EAST WING AUXILIARY BACKWIND LANE SUPPORT PROGRAM DESIGN 5 SUPPORT EFFECT MONITORING 6 CONCLUSIONS REFERENCES Research on “zero-damage” control technology for box girder of prestressed concrete 1 INTRODUCTION 2 ADJUSTMENT AND OPTIMIZATION OF PRESTRESS TENSIONING SCHEMES 3 OTHER IMPROVED MEASURES FOR CONTROLLING THE QUALITY OF CONCRETE 4 CONCLUSIONS REFERENCES Research and application of temporary piers in the construction of steel truss girder incremental launching 1 INTRODUCTION 2 ENGINEERING BACKGROUND 3 TEMPORARY PIER FINITE ELEMENT MODELS 5 CONCLUSION REFERENCES Analysis of green construction technology 1 INTRODUCTION 2 PREPARATION BEFORE CONSTRUCTION 3 SOIL TREATMENT BEFORE PLANTING 4 PLANT CONFIGURATION IN CONSTRUCTION DESIGN 5 PLANTING MATTERS NEEDING ATTENTION 6 CONSTRUCTION METHOD OF GREENING PLANTS 7 CONCLUSION ACKNOWLEDGMENTS REFERENCES Study on sand blowing filling construction of construction platform and access road under complex geological conditions of offshore deep siltation 1 INTRODUCTION 2 CONSTRUCTION PROCESS CHARACTERISTICS 3 CONSTRUCTION PROCESS PRINCIPLE 4 CONSTRUCTION PROCESS FLOWAND OPERATION POINTS 5 CONCLUSION AND EXPECTATION REFERENCES Application research of plastic drainage and preloading consolidation method in deep soft soil foundation treatment project 1 INTRODUCTION 2 ENGINEERING GEOLOGICAL CONDITIONS AND DESIGN SCHEME 3 CONSTRUCTION OF PLASTIC DRAINAGE AND PRELOADING CONSOLIDATION 4 CONCLUSION REFERENCES Application research of multi-directional mixing cored pile in a deep soft soil foundation treatment project of the Zhuhai Hegang expressway project 1 INTRODUCTION 2 ENGINEERING GEOLOGICAL CONDITIONS AND DESIGN SCHEME 3 CONSTRUCTION AND QUALITY INSPECTION OF MULTI-DIRECTION COREDMIXING PILE 4 TECHNICAL AND ECONOMIC COMPARISON WITH OTHER SCHEMES 5 CONCLUSION REFERENCES Construction technology of large cantilever prestressed vase pier cover beam 1 INTRODUCTION 2 CONSTRUCTION OF TECHNICAL FEATURES 3 KEY CONSTRUCTION TECHNOLOGY 4 CONCLUSION 5 TECHNICAL FEATURES REFERENCES Road distress detection and maintenance evaluation based on ground penetrating radar 1 INTRODUCTION 2 DETECTION SCHEME 3 DISTRESS ANALYSIS 4 MAINTENANCE EVALUATION 5 CONCLUSION REFERENCES Stress analysis of the cable tower during hoisting construction of a self-ascending crane of the Shunde Bridge 1 INTRODUCTION 2 PROJECT OVERVIEW 3 ESTABLISHMENT OF FINITE ELEMENT MODEL FOR HOISTING PROCESS 4 FINITE ELEMENT RESULTS AND ANALYSIS 5 CONCLUSION AND PROSPECT REFERENCES Literature review: BIM-based methodology implemented in off-site construction 1 INTRODUCTION 2 LITERATURE REVIEW 3 DISCUSSION 4 CONCLUSION ACKNOWLEDGMENT REFERENCES Construction stability analysis of a variable section tunnel in soft wall rock based on numerical analysis 1 INTRODUCTION 2 ENGINEERING BACKGROUND 3 SECOND LINING FRACTURE CHARACTERISTICS 4 NUMERICAL MODELING 5 ANALYSIS OF SIMULATION RESULTS 7 CONCLUSION ACKNOWLEDGMENTS REFERENCES Seismic performance analysis methods for frame-core structures in elastic and elastic-plastic phases 1 INTRODUCTION 2 CHARACTERISTICS OF ELASTIC AND ELASTIC-PLASTIC ANALYSIS METHODS 3 APPLICATION OF ELASTIC AND ELASTIC-PLASTIC ANALYSIS METHODS TOCORE STRUCTURES 4 CONCLUSION REFERENCES Analysis of tunnel construction in soft wall rock stratum 1 INTRODUCTION 2 OVERVIEW OF SUPPORTING PROJECTS 3 NUMERICAL SIMULATION ANALYSIS OF TUNNEL CONSTRUCTION 4 MONITORING MEASUREMENT ANALYSIS 5 CONTRASTIVE ANALYSIS 6 CONCLUSION REFERENCES Study on waterproof ability of assembled lining structure of highway mountain tunnel constructed by drilling blasting method 1 INTRODUCTION 2 NUMERICAL SIMULATION ANALYSIS OF COMPRESSION OF JOINT RUBBERSEALING CUSHION 3 WATERPROOF ABILITY TEST OF EPDM 4 CONCLUSION REFERENCES Study on the risk assessment system of floating transportation and sinking of immersed tunnel in Shenzhen-Zhongshan Link 1 INTRODUCTION 2 MAIN RISK ACCIDENTS OF IMMERSED TUNNEL 3 CHARACTERISTICS OF FLOATING AND SINKING 4 RISK ASSESSMENT SYSTEM 5 RISK IDENTIFICATION AND ANALYSIS 6 CONCLUSION ACKNOWLEDGMENTS REFERENCES Research on the technology evaluation of green low-carbon building based on improved order relation-extenics 1 INTRODUCTION 2 GREEN LOW-CARBON BUILDING TECHNICAL AND ECONOMIC ANALYSIS 3 THE ESTABLISHMENT OF THE ECONOMIC EFFECT EVALUATION SYSTEM OFGREEN AND LOW-CARBON BUILDINGS 4 IMPROVED SEQUENTIAL RELATION ANALYSIS-ESTABLISHMENT OF EXTENSIONEVALUATION MODEL 5 CONCLUSION REFERENCES Application technology of foam light soil in airport backfilling project 1 INTRODUCTION 2 PROJECT OVERVIEW 3 ENGINEERING GEOLOGY 4 CALCULATION OF RAW MATERIALS AND MIXING RATIO 6 CONCLUSION REFERENCES Analysis on influencing factors of steam curing energy consumption of prefabricated building components 1 INTRODUCTION 2 INFLUENCING FACTORS OF STEAM CURING ENERGY CONSUMPTION 3 CONCLUSION ACKNOWLEDGMENTS REFERENCES Industrial building design and digital modeling application Application and innovation of the lightweight support-jacking formwork integrated platform in the construction of the Citymark Financial Center 1 INTRODUCTION 2 DESIGN AND INSTALLATION OF LIGHTWEIGHT SUPPORT-JACKING FORMWORKINTEGRATED PLATFORM 3 PLANNING AND DESIGN OF CLIMBING 4 TRANSFORMING FROMA NINE-GRID LAYOUT TO A FIVE-GRID LAYOUT 5 RECONSTRUCTION DESIGN OF THE INCLINEDWALL 6 DESIGN FOR AN ELEVATOR SLIDING ATTACHMENT DEVICE BASED ON THELIGHTWEIGHT JACKING FORMWORK SYSTEM 7 DESIGN CONDITION ANALYSIS OF THE LIGHTWEIGHT JACKING FORMWORKINTEGRATED PLATFORM 8 CONCLUSION REFERENCES Analysis of the application of the graph multiplication method to calculate the displacement of building structures 1 INTRODUCTION 2 APPLICATION OBJECT PROFILING 3 APPLICATION CONDITIONS ANALYSIS 4 APPLICATION PROCESS ANALYSIS 5 APPLICATION EXPANSION ANALYSIS 6 CONCLUSION ACKNOWLEDGEMENTS REFERENCES Insights based on a sustainable green solar building design competition – Documenting the Delta Cup solar competition 1 INTRODUCTION 2 PROJECT OVERVIEW 3 APPLICATION OF PASSIVE ENERGY-SAVING TECHNOLOGIES IN BUILDINGDESIGN 4 COMBINATION OF SOLAR DESIGN AND ARCHITECTURAL DESIGN 5 CONCLUSION ACKNOWLEDGMENTS REFERENCES Compressive test of the stochastic damage constitutive model of rubber particles self-compacting lightweight aggregate concrete in a strong-alkaline environment 1 INTRODUCTION 2 DESIGN OF THE TEST PLAN 4 CALCULATION AND FITTING OF THE CONSTITUTIVE MODEL 5 CONCLUSION ACKNOWLEDGMENT REFERENCES Uncertainty analysis of dam finite element simulation based on a surrogate model 1 INTRODUCTION 2 FINITE ELEMENT SIMULATION OF DAM 3 KRIGING SURROGATE MODEL 4 ENGINEERING PROJECTS 5 CONCLUSION ACKNOWLEDGMENTS REFERENCES Research on indoor and outdoor environment design of old residential buildings based on BIM 1 INTRODUCTION 2 RESIDENTIAL BUILDINGS FOR THE ELDE 3 TO DESIGN THE INDOOR AND OUTDOOR ENVIRONMENT OF OLD HOUSESBY BIM 4 CONCLUSION REFERENCES Managerial concept involved in BIM-based cost estimation for prefabrication 1 INTRODUCTION 2 LITERATURE REVIEW 3 DISCUSSION 4 CONCLUSION ACKNOWLEDGMENT REFERENCES Research on sustainable design of China aid residential construction project in Africa based on passive energy-saving theory 1 INTRODUCTION 2 CURRENT SITUATION OF PASSIVE ENERGY-SAVING BUILDINGS IN RECIPIENTCOUNTRIES OF AFRICA 3 STUDY ON PASSIVE ENERGY-SAVING STRATEGY OF CHINA AID RESIDENCECONSTRUCTION PROJECT IN ERITREA 4 CONCLUSIONS: DESIGN STRATEGY ACKNOWLEDGMENTS REFERENCES Research and analysis on super high-rise building structure design 1 INTRODUCTION 2 KEY ELEMENTS OF SUPER HIGH-RISE BUILDINGS 3 SECURITY AND GREEN DESIGN OF SUPER HIGH-RISE BUILDING 4 CONCLUSION REFERENCES Application of analytic hierarchy process to evaluate the influencing factors of prefabricated building quality 1 INTRODUCTION 2 DEFINITION AND RESEARCH STATUS OF PREFABRICATED BUILDINGS 3 QUALITY CONTROL POINTS OF PREFABRICATED BUILDINGS 4 INSPECTION AND IDENTIFICATION OF QUALITY PROBLEMS BY ANALYTICHIERARCHY PROCESS 5 CONCLUSION ACKNOWLEDGMENTS REFERENCES Identification of damage locations in long-span continuous rigid frame bridges by using support vector machines 1 INTRODUCTION 2 DAMAGE IDENTIFICATION METHOD 3 SUPPORT VECTOR MACHINE CLASSIFICATION BASED ON MACHINE THEORY 4 DAMAGE LOCATION IDENTIFICATION OF LONG-SPAN CONTINUOUS RIGIDFRAME BRIDGE 5 CONCLUSION REFERENCES Comparison of high-strength steel Q460C and Q235C steel structures based on Midas Gen finite element modeling 1 INTRODUCTION 2 ENGINEERING MODELING 3 MODELING RESULTS OF Q235C AND Q460C 4 DISCUSSION 5 CONCLUSION REFERENCES Study on anti-buoyancy calculation and treatment measures of a large diameter shield tunnel in liquefied sand 1 INTRODUCTION 2 ANTI-FLOATING CALCULATION OF SHIELD IN NON-LIQUEFIED STRATUM 3 ANTI-FLOATING CALCULATION OF SHIELD IN LIQUEFIED STRATUM 4 LIQUEFACTION TREATMENT MEASURES 5 ENGINEERING CASE CALCULATION AND LIQUEFACTION DISPOSAL 6 CONCLUSION REFERENCES Quantitative analysis of sand particle shape based on digital image processing 1 INSTRUCTION 2 TEST MATERIALS AND TEST PROCESS 4 SELECTION OF PARTICAL SHAPE PARAMETERS 6 CONCLUSION AND PROSPECT REFERENCES Optimization of rail cant of the guide curve rail based on finite element method 1 INTRODUCTION 2 FINITE ELEMENT MODEL 3 CALCULATION AND ANALYSIS 4 CONCLUSION ACKNOWLEDGMENTS REFERENCES Digital modelling for ancient Chinese architecture based on 3D laser scanning technology 1 INTRODUCTION 2 SURFACE RECONSTRUCTION METHODS 3 POINT CLOUD DATA ACQUISITION AND PROCESSION 4 POINT ACCURACY VERIFICATION 5 MODELLING BASED ON POINT CLOUD DATA PROCESSING 6 ACCURACY EVALUATION OF THE IMPROVED MODELLING METHODS 7 CONCLUSIONS ACKNOWLEDGMENT REFERENCES Author index